Salix 15.0RC3

User avatar
Bird
Donor
Posts: 80
Joined: 24. Jul 2015, 12:15
Location: Germany

Re: Salix 15.0RC3

Post by Bird »

@Dizover: I have the same error messages with an old P3 (32-bit). Although after three retries or so with this "ata1" thing (that take about 1 minute), the startup process continues. I wonder what the low-spec system requirements for the new Salix are, because 14.1 was definetly useable (with the right programs of course) on a Pentium 3 of 2000.
User avatar
simone
Posts: 42
Joined: 24. Sep 2016, 14:36
Contact:

Re: Salix 15.0RC3

Post by simone »

It's perfect, I've been using Salixos for years and I have to thank Gapan for the work he does.
One technical question why not using the generic kernel (the one recommended by Pat Volkerding) is not lighter than the huge one?
Thanks
Il cielo prima di tutto. Sempre.
www.simonecumbo.it
waterblade
Posts: 1
Joined: 18. Aug 2022, 06:55

Re: Salix 15.0RC3

Post by waterblade »

Hi everyone!
I had shelved Salix for several years and just did a fresh install on my old thinkpad T430s.
I'm glad to notice that everything works fine. Thank you for all this great work!

There is however an bug in the rc.thinkfan script.
On the fourth line it is written:

Code: Select all

BIN=/usr/bin/$NAME
when it should be:

Code: Select all

BIN=/usr/sbin/$NAME
User avatar
gapan
Salix Wizard
Posts: 6236
Joined: 6. Jun 2009, 17:40

Re: Salix 15.0RC3

Post by gapan »

missTell wrote: 15. Aug 2022, 17:42 Workaround: Set the systray-6 icon size to 'Adjust size automatically' or to fixed 31 pixels (for the default 30 pixels panel height!). As in my video.
Which one is better or worse is very easy to see when comparing with surrounding tooltips -- the distance between the top of the panel and the bottom of the tooltip is different according to 'Auto' or '31 Px' ... darn 'who cares about 1 Px' ... ;)
Which one is it? 31px or adjust size automatically?

If I set the icon size to 24 and panel height to 30, they also show up.
Image
Image
User avatar
mimosa
Salix Warrior
Posts: 3311
Joined: 25. May 2010, 17:02
Contact:

Re: Salix 15.0RC3

Post by mimosa »

I have just done a fresh install of the RC3, and something strange happened. I chose to mount my data partition on /home/mimosa/Downloads, which worked, but the home directory was otherwise completely empty, in particular, without needed dot files to log in. I was able to log in normally from console.

It works fine if I do it by editing fstab manually after installation.
User avatar
gapan
Salix Wizard
Posts: 6236
Joined: 6. Jun 2009, 17:40

Re: Salix 15.0RC3

Post by gapan »

mimosa, my guess is you accidentally mounted it on /home/mimosa instead of Downloads.
Image
Image
User avatar
mimosa
Salix Warrior
Posts: 3311
Joined: 25. May 2010, 17:02
Contact:

Re: Salix 15.0RC3

Post by mimosa »

I suppose it's possible, but I did do the whole thing two or three times while I was trying to work out what was up. Anyway, there's no way of telling now, and it works. By the way is this fstab line correct?

Code: Select all

/dev/sda2        /home/mimosa/Downloads btrfs defaults 1 2
User avatar
gapan
Salix Wizard
Posts: 6236
Joined: 6. Jun 2009, 17:40

Re: Salix 15.0RC3

Post by gapan »

Yes, I think so.
Image
Image
User avatar
mimosa
Salix Warrior
Posts: 3311
Joined: 25. May 2010, 17:02
Contact:

Re: Salix 15.0RC3

Post by mimosa »

I just tried to "install multimedia codecs", and got a message saying "it seems you do not have the permissions to write the repository files". Same from xterm:

Code: Select all

mimosa[~]$ sudo salix-codecs-installer-gtk
Password: 
gpg: Signature made Fri 19 Aug 2022 00:26:31 BST using DSA key ID 40102233
gpg: Can't check signature: public key not found
gpg: Signature made Fri 08 Jul 2022 00:07:30 BST using DSA key ID 40102233
gpg: Can't check signature: public key not found
gpg: Signature made Sat 20 Aug 2022 09:26:06 BST using DSA key ID A5629B42
gpg: Can't check signature: public key not found
gpg: Signature made Wed 10 Aug 2022 22:45:17 BST using DSA key ID A5629B42
gpg: Can't check signature: public key not found
EDIT scrub this, the reason is I set up my local repo, but it doesn't have any packages in it yet; so slapt-get is unhappy with that line in slapt-getrc
User avatar
Papasot
Donor
Posts: 247
Joined: 3. May 2015, 18:37
Location: Patras, Greece

Re: Salix 15.0RC3

Post by Papasot »

mimosa wrote: 20. Aug 2022, 18:52 EDIT scrub this, the reason is I set up my local repo, but it doesn't have any packages in it yet; so slapt-get is unhappy with that line in slapt-getrc
Fun fact, I had the exact same "issue" for the exact same reason in RC3.
A pleasant detail in this forum: several people pick a picture of their pet as their avatar. Who am I to do otherwise? ;-)
Post Reply