So I created a live USB stick (with persistence) and it worked great! I ran it on my lenovo idea pad. Perfect.
But, then I used the same stick on my Toshiba netbook. It worked perfectly there too.
I then returned to use the stick on my idea pad. It will not network! In wicd, no wireless networks are recognized. And, I cannot even connect with a wired connection! Hardware is confirmed functional (as I type).
The stick still works great on the netbook.
Where do I start to debug this?
Networking
Re: Networking
Hummm, could be that you have a device number shift for your connection. It happens also on regular installation, depending on the network driver and the order the bios list devices (which can change from one boot time to another).
Check with a root terminal, using ifconfig -a, that you have for example a eth1 or wlan1 interface instead of eth0 or wlan0. If it is, you just have to open wicd preferences and fill the correct device name for the connection.
I know that there is a udev rule trick to fix the connection name to wlan0 or eth0 despite the order the kernel/driver detects and name it.
Hope my guess is right…
Check with a root terminal, using ifconfig -a, that you have for example a eth1 or wlan1 interface instead of eth0 or wlan0. If it is, you just have to open wicd preferences and fill the correct device name for the connection.
I know that there is a udev rule trick to fix the connection name to wlan0 or eth0 despite the order the kernel/driver detects and name it.
Hope my guess is right…
Re: Networking
Start by finding out what network card you have.jagdpup wrote:Where do I start to debug this?