[RISOLTO] GUIDA ALL'INSTALLAZIONE DI GOOGLE-CHROME STABLE

Italian forum
Post Reply
Marco
Posts: 117
Joined: 10. Apr 2012, 17:43

[RISOLTO] GUIDA ALL'INSTALLAZIONE DI GOOGLE-CHROME STABLE

Post by Marco »

Buongiorno a tutti.
Posto questa guida per quanti volessero installare google-chrome stable sulla nostra Salix.
Nei repo degli slackbuild si trova la versione unstable,che oltre al fatto di essere appunto non stabile c'è da correggere la riga
relativa alla voce "lmza" infatti se lanciamo lo script così com'è quasi sicuramente riceviamo questo errore:
nessuna voce data.tar.lzma nell'archivio
lzma: (stdin): Formato di file non riconosciuto
tar: Questo non sembra un archivio tar
tar: Uscita con stato di fallimento in base agli errori precedenti
Ovviamnete io preferisco la versione stable. Procediamo:

Andiamo su questo sito: http://ftp.slackware.com/pub/slackware/ ... le-chrome/

Un click dx sulla voce che ci interessa,google-chrome.SlackBuild, e poi scegliamo salva destinazione con nome.

Poi andiamo su google e scarichiamo la versione .deb (per debian-ubuntu) del google-chrome che ci interessa (32 o 64 bit)

Mettiamo i due file che abbiamo scaricato in una cartella e rendiamo eseguibile lo slackbuild.
(potete farlo sia da terminale che cliccandoci sopra con il mouse e nella scheda permessi mettete la spunta su rendi eseguibile qst file.... non serve essere root)

Infine apriamo una shell in quella cartella e poi lanciamo il comando: sudo ./google-chrome.SlackBuild
Aspettiamo la creazione del pacchetto e poi ci trasferiamo nella cartella /tmp (li troveremo il pacchetto .txz pronto per l'installazione)

Una volta nella cartella /tmp lanciamo in comando: sudo installpkg nomepachetto.txz

Ricordatevi che prima di installare il pacchetto google-chrome dovete "soddisfare le sue dipendenze" (pena il non funzionamento)
che sono: cgonf e seamonkey-solibs.

Un saluto

P.S.
#!/bin/sh

# Copyright 2009-2010 Erik Hanson, Minneapolis, MN, USA
# Copyright 2011, 2015 Patrick J. Volkerding, Sebeka, MN, USA
# All rights reserved.
#
# Redistribution and use of this script, with or without modification, is
# permitted provided that the following conditions are met:
#
# 1. Redistributions of this script must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.


PKGNAM=google-chrome
RELEASE=${RELEASE:-stable} # stable, beta, or unstable

# Allow $ARCH to be preset before running the script. This is useful in the
# case where someone is running a 32-bit chroot environment under an x86_64
# kernel:
ARCH=${ARCH:-$(uname -m)}

case "$ARCH" in
i?86) DEBARCH="i386" ; LIBDIRSUFFIX="" ; ARCH=i386 ;;
x86_64) DEBARCH="amd64" ; LIBDIRSUFFIX="64" ; ARCH=x86_64 ;;
*) echo "Package for $(uname -m) architecture is not available." ; exit 1 ;;
esac
# Get the version from the Debian/Ubuntu .deb (thanks to Fred Richards):
VERSION=$(ar p google-chrome-${RELEASE}_current_${DEBARCH}.deb control.tar.gz 2> /dev/null | tar zxO ./control 2> /dev/null | grep Version | awk '{print $2}' | cut -d- -f1)
BUILD=${BUILD:-1}


if [ ! $UID = 0 ]; then
cat << EOF

This script must be run as root.

EOF
exit 1
fi

if ! /bin/ls google-chrome-*.deb 1> /dev/null 2> /dev/null ; then
cat << EOF

This is a script to repackage a Debian/Ubuntu Google Chrome .deb package
for Slackware. Run this script in the same directory as one of these
binary packages:

google-chrome-stable_current_amd64.deb (for 64-bit x86_64)
google-chrome-stable_current_i386.deb (for 32-bit x86)

This will create a Slackware .txz package. Install it with installpkg
or use upgradepkg to upgrade from a previous version.

EOF
exit 1
fi

CWD=$(pwd)
TMP=${TMP:-/tmp}
PKG=$TMP/package-$PKGNAM
OUTPUT=${OUTPUT:-/tmp}

rm -rf $PKG
mkdir -p $TMP $PKG $OUTPUT
cd $PKG
ar p $CWD/google-chrome-${RELEASE}_current_${DEBARCH}.deb data.tar.xz | tar xJv || exit 1
chown -R root:root .
chmod -R u+w,go+r-w,a-s .

# Make sure top-level perms are correct:
chmod 0755 .
# This needs to be setuid root:
chmod 4711 opt/google/chrome/chrome-sandbox
# The cron job is for Debian/Ubuntu only:
rm -rf etc

# Link to the standard Mozilla library names:
sed -i 's,libnss3.so.1d,libnss3.so\x00\x00\x00,g;
s,libnssutil3.so.1d,libnssutil3.so\x00\x00\x00,g;
s,libsmime3.so.1d,libsmime3.so\x00\x00\x00,g;
s,libssl3.so.1d,libssl3.so\x00\x00\x00,g;
s,libplds4.so.0d,libplds4.so\x00\x00\x00,g;
s,libplc4.so.0d,libplc4.so\x00\x00\x00,g;
s,libnspr4.so.0d,libnspr4.so\x00\x00\x00,g;' opt/google/chrome/chrome

# --mandir=/usr/man:
mv $PKG/usr/share/man $PKG/usr/man
# Compress manual pages:
find $PKG/usr/man -type f -exec gzip -9 {} \;
for i in $( find $PKG/usr/man -type l ) ; do
ln -s $( readlink $i ).gz $i.gz
rm $i
done

# Install a .desktop launcher:
sed -i -e "s#Icon=google-chrome#Icon=/opt/google/chrome/product_logo_256.png#" \
$PKG/usr/share/applications/google-chrome.desktop

mkdir -p $PKG/install
cat $CWD/slack-desc > $PKG/install/slack-desc

cd $PKG
/sbin/makepkg -l y -c n $OUTPUT/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
Questo è il contenuto dello slackbuild per google-chrome, potete creare il file, con un editor di testi, semplicemente usando copia ed incolla.
Se un uomo ha fame non regalargli un pesce, ma insegnagli a pescare.
Post Reply