Code: Select all
lsblk -o name,size,fstype,mountpoint
NAME SIZE FSTYPE MOUNTPOINT
sda 74.5G
|-sda1 22.5M ext3
|-sda2 23.5M ext2
|-sda3 1K
|-sda5 34.2G ext4
|-sda6 15.6G ext4
`-sda7 24.7G ext4
sdb 465.8G
|-sdb1 1K
|-sdb2 78.3G ext4
|-sdb3 117.3G ext4 /
|-sdb4 58.9G ext4
|-sdb5 75G ext4
|-sdb6 40G ext4
`-sdb7 35G ext4
sr0 1024M
Code: Select all
cat /etc/fstab
/dev/sdb3 / ext4 defaults 1 1
/dev/sdb5 /mnt/Sdb5 ext4 defaults,noauto 0 0
/dev/sdb7 /mnt/Sdb7 ext4 defaults,noauto 0 0
/dev/sdb2 /mnt/Sdb2 ext4 defaults,noauto 0 0
/dev/sdb4 /mnt/Sdb4 ext4 defaults,noauto 0 0
/dev/sda5 /mnt/Sda5 ext4 defaults,noauto 0 0
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro,comment=x-gvfs-show 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
Code: Select all
cat /etc/lilo.conf
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
lba32 # Allow booting past 1024th cylinder with a recent BIOS
lba32 # Allow booting past 1024th cylinder with a recent BIOS
boot = /dev/sdb
compact # faster, but won't work on all systems.
# disk = /dev/sdb
# bios = 0x81
# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/salix.bmp
default = Slint32-Sdb3
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,20,255,20,255,20
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used. We don't specify it here, as there's just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,29,0,255
# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt
# Append any additional kernel parameters:
append="quiet vt.default_utf8=1"
prompt
timeout = 50
# VESA framebuffer console @ 1280x1024x64k
vga = 791
# ramdisk = 0 # paranoia setting
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sdb3
label = Slint32-Sdb3
read-only # Partitions should be mounted read-only for checking
image = /mnt/Sdb7/boot/vmlinuz
root = /dev/sdb7
label = Salix-Sdb7
read-only
image = /mnt/Sdb2/boot/vmlinuz
root = /dev/sdb2
label = Slackel-Sdb2
read-only
image = /mnt/Sda5/boot/vmlinuz
root = /dev/sda5
label = SLint64-Sda5
read-only
# Linux bootable partition config ends