[SOLVED]usb wifi adapter issue
[SOLVED]usb wifi adapter issue
Hi,
I'm running Salix Mate (1.16.1) on a thinkcerter tower. My usb wifi adapter is dead (a D-link DWA160) but have worked fine for 6 year. I'm trying to replace it and have tried three different one without success. My linux don't see em.
The only one that work actually is a very very old one, a linksys 802.11G WUSB54G but you can imagine that it is very slow.
Can you recommend me a new usb wifi adapter that work easily.
Thank you.
I'm running Salix Mate (1.16.1) on a thinkcerter tower. My usb wifi adapter is dead (a D-link DWA160) but have worked fine for 6 year. I'm trying to replace it and have tried three different one without success. My linux don't see em.
The only one that work actually is a very very old one, a linksys 802.11G WUSB54G but you can imagine that it is very slow.
Can you recommend me a new usb wifi adapter that work easily.
Thank you.
Re: usb wifi adapter issue
I think that first of all, we should try to make the ones you already have work. What's the output of the
command after you plug each one of them in?
I'm guessing that one or more of them have a broadcom chipset, which requires extra firmware to work.
Code: Select all
sudo lsusb
I'm guessing that one or more of them have a broadcom chipset, which requires extra firmware to work.
Re: usb wifi adapter issue
i have purchase a new linksys WUSB6400M-CA
Bus 001 Device 025: ID 13b1:0043 Linksys
Code: Select all
sudo lsusb
Re: usb wifi adapter issue
but if you know one that is easy to use i will buy it
Re: usb wifi adapter issue
An online search reveals that the linksys wifi adapter you have includes the Realtek rtl8812bu chipset. You should be able to use it by installing these drivers:
https://github.com/ulli-kroll/rtl8822bu
and then load the module with
You'll need to have the kernel-source package installed.
If everything goes well, you should see a new device shown in NetworkManager.
I don't have such a wireless adapter, so I can't really tell if it works, but it should.
https://github.com/ulli-kroll/rtl8822bu
Code: Select all
git clone https://github.com/ulli-kroll/rtl8822bu.git
cd rtl8812bu
make
sudo make installfw
sudo cp rtl8822bu.ko /lib/modules/$(uname -r)/kernel/drivers/net/wireless
Code: Select all
sudo modprobe rtl8822bu
If everything goes well, you should see a new device shown in NetworkManager.
I don't have such a wireless adapter, so I can't really tell if it works, but it should.
Re: usb wifi adapter issue
It appears to be a Realtek chip which needs the rtl8812au driver. It needs to be built. I found this thread in the Salckware forum https://www.linuxquestions.org/question ... 175606244/sebaz wrote: ↑7. Oct 2019, 20:28 i have purchase a new linksys WUSB6400M-CABus 001 Device 025: ID 13b1:0043 LinksysCode: Select all
sudo lsusb
which has a slackbuild in post #4. I copied it into a text file and ran it. It downloaded the driver source from git and seemed to build a package without problems, but of course I can't test it.
“Don’t you see that the whole aim of Newspeak is to narrow the range of thought?"
Re: usb wifi adapter issue
Thank you laprjns and gapan,
i have tried both solution
and
https://www.linuxquestions.org/question ... 175606244/
and both dont work easely for me. I've tried but did not succed.
But i have found there
https://www.linuxquestions.org/question ... 175654596/
that talk about the Panda PAU05 usb wifi adapter
i have tried both solution
Code: Select all
git clone https://github.com/ulli-kroll/rtl8822bu.git
cd rtl8812bu
make
sudo make installfw
sudo cp rtl8822bu.ko /lib/modules/$(uname -r)/kernel/drivers/net/wireless
https://www.linuxquestions.org/question ... 175606244/
and both dont work easely for me. I've tried but did not succed.
But i have found there
https://www.linuxquestions.org/question ... 175654596/
that talk about the Panda PAU05 usb wifi adapter
The linksys WUSB6400M will go back to the store, and will buy and try the Panda PAU05.Alien Bob wrote: According to its modinfo output, the rt2800usb driver in the Linux kernel (part of Slackware 14.2 and -current where I checked) supports your Panda PAU05 USB device with ID 148f:5372.
Re: usb wifi adapter issue
I use Panda PAU05 on one box and it works flawlessly with Slackware and Salix. It was plug and play. I did have to use Network Manager as for some reason Wicd kept wanting to have a random MAC and the WiFi security wanted the MAC to stay the same.
Re: usb wifi adapter issue
Tank you ChuangTzu, that is good news!
I have ordered one. I will give feedback when i try it
I have ordered one. I will give feedback when i try it
Re: usb wifi adapter issue
Some wifi sticks make your computer life easy, some make it difficult. I have one here called PW-DN4210D, which might be old. Plugged it in, no problems. Instant wireless connection avaiable on a Salix desktop.