Full screen video performance/lags

[loukingjr]

http://www.salixos.org/forum/viewtopic.php?f=30&t=1298

thanks but the guest additions are installed in both LXDE and XFCE. all the features work just fine,. it's just whenever I try and run a video in full screen mode in the guest, it bogs down. was another thread here about someone having the same issue running Neverball in Salix natively.

[damNageHack]

Code: Select all

lspci | grep VGA

Output

Code: Select all

lsmod

Output

Code: Select all

dmesg

Output

[loukingjr]

root[louis]# lspci | grep VGA
00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter

root[louis]# lsmod
Module Size Used by
vboxvideo 1149 1
drm 133002 2 vboxvideo
vboxsf 32237 0
snd_seq_dummy 1107 0
snd_seq_oss 25580 0
snd_seq_midi_event 4620 1 snd_seq_oss
snd_seq 42857 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4543 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33917 0
snd_mixer_oss 13399 1 snd_pcm_oss
ipv6 229909 14
agpgart 23773 1 drm
lp 7161 0
fuse 52401 1
joydev 7989 0
usbhid 33016 0
hid 61027 1 usbhid
ppdev 5103 0
parport_pc 18027 0
snd_intel8x0 22387 0
parport 25487 3 lp,ppdev,parport_pc
snd_ac97_codec 89467 1 snd_intel8x0
ac97_bus 822 1 snd_ac97_codec
snd_pcm 57736 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
ac 2423 0
processor 26515 0
psmouse 40750 0
thermal 10194 0
snd_timer 15699 2 snd_seq,snd_pcm
i2c_piix4 7608 0
rtc_cmos 7838 0
thermal_sys 12086 2 processor,thermal
serio_raw 3754 0
e1000 91151 0
rtc_core 12050 1 rtc_cmos
rtc_lib 1522 1 rtc_core
evdev 6939 9
hwmon 1085 1 thermal_sys
snd 43107 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
i2c_core 15279 2 drm,i2c_piix4
vboxguest 118468 7 vboxsf
button 3934 0
soundcore 4815 1 snd
snd_page_alloc 5849 2 snd_intel8x0,snd_pcm
sg 21214 0

root[louis]# dmesg
Linux version 2.6.33.4-smp (root@midas) (gcc version 4.4.4 (GCC) ) #2 SMP Wed May 12 22:47:36 CDT 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000037ff0000 (usable)
BIOS-e820: 0000000037ff0000 - 0000000038000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.5 present.
last_pfn = 0x37ff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
initial memory mapped : 0 - 02000000
found SMP MP-table at [c009fff0] 9fff0
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
ACPI: RSDP 000e0000 00024 (v02 VBOX )
ACPI: XSDT 37ff0030 0003C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
ACPI: FACP 37ff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
ACPI: DSDT 37ff0460 018FF (v01 VBOX VBOXBIOS 00000002 INTL 20060912)
ACPI: FACS 37ff0200 00040
ACPI: APIC 37ff0240 0004A (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
ACPI: SSDT 37ff0290 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20060912)
ACPI: Local APIC address 0xfee00000
11MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00009000 - 0000fe80
(13 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001df1f64] TEXT DATA BSS ==> [0001000000 - 0001df1f64]
#3 [0001df2000 - 0001dfa071] BRK ==> [0001df2000 - 0001dfa071]
#4 [000009fc00 - 000009fff0] BIOS reserved ==> [000009fc00 - 000009fff0]
#5 [000009fff0 - 00000a0000] MP-table mpf ==> [000009fff0 - 00000a0000]
#6 [00000a0000 - 00000e1160] BIOS reserved ==> [00000a0000 - 00000e1160]
#7 [00000e1240 - 0000100000] BIOS reserved ==> [00000e1240 - 0000100000]
#8 [00000e1160 - 00000e1240] MP-table mpc ==> [00000e1160 - 00000e1240]
#9 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000]
#10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#11 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#12 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x00037ff0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037ff0
On node 0 totalpages: 229263
free_area_init_node: node 0, pgdat c1c4d140, node_mem_map c1dfc000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 24 pages used for memmap
HighMem zone: 3034 pages, LIFO batch:0
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 38000000 (gap: 38000000:c7fc0000)
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2800000 s34648 r0 d22696 u4194304
pcpu-alloc: s34648 r0 d22696 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227471
Kernel command line: BOOT_IMAGE=Linux ro root=801 quiet vt.default_utf8=1
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:00037ff0)
Memory: 894368k/917440k available (9560k kernel code, 22388k reserved, 3111k data, 636k init, 12232k highmem)
virtual kernel memory layout:
fixmap : 0xffd57000 - 0xfffff000 (2720 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc1c61000 - 0xc1d00000 ( 636 kB)
.data : 0xc19561c0 - 0xc1c60004 (3111 kB)
.text : 0xc1000000 - 0xc19561c0 (9560 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration failed
TSC: Unable to calibrate against PIT
TSC: using PMTIMER reference calibration
Detected 2001.364 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4002.72 BogoMIPS (lpj=2001364)
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 0 MCE banks
using mwait in idle threads.
Performance Events: unsupported p6 CPU model 15 no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 29k freed
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 33446 entries in 66 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
APIC delta adjusted to PM-Timer: 6284092 (7245436)
Brought up 1 CPUs
Total of 1 processors activated (4002.72 BogoMIPS).
devtmpfs: initialized
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 300.000 MB/sec
xor: using function: pIII_sse (300.000 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfc130, last bus=0
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x38000000-0xffdfffff] (ignored)
pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe3ffffff pref]
pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1 714 MB/s
raid6: int32x2 906 MB/s
raid6: int32x4 671 MB/s
raid6: int32x8 667 MB/s
raid6: mmxx1 1476 MB/s
raid6: mmxx2 2097 MB/s
raid6: sse1x1 1242 MB/s
raid6: sse1x2 1496 MB/s
raid6: sse2x1 1820 MB/s
raid6: sse2x2 2277 MB/s
raid6: using algorithm sse2x2 (2277 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 5 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
platform rtc_cmos: registered platform RTC device (no PNP device found)
audit: initializing netlink socket (disabled)
type=2000 audit(1285083221.187:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
DLM (built May 12 2010 22:42:00) installed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W].
ROMFS MTD (C) 2007 Red Hat, Inc.
JFS: nTxBlock = 6989, nTxLock = 55918
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
OCFS2 1.5.0
ocfs2: Registered cluster interface o2cb
ocfs2: Registered cluster interface user
OCFS2 Node Manager 1.5.0
OCFS2 DLM 1.5.0
OCFS2 DLMFS 1.5.0
OCFS2 User DLM kernel interface loaded
Btrfs loaded
Slow work thread pool: Starting up
Slow work thread pool: Ready
GFS2 (built May 12 2010 22:42:42) installed
msgmni has been set to 1723
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Loading iSCSI transport class v2.0-870.
fnic: Cisco FCoE HBA Driver, ver 1.0.0.1121
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.01-k10
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.7
Copyright(c) 2004-2009 Emulex. All rights reserved.
Brocade BFA FC/FCOE SCSI driver - version: 2.0.0.0
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.12-rc1 Thu Sep. 17 11:41:51 PST 2009
mpt2sas version 03.100.03.00 loaded
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.3 (June 10, 2009)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
stex: Promise SuperTrak EX Driver version: 4.6.0000.4
st: Version 20081215, fixed bufsize 32768, s/g segs 256
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.13
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.13
Fusion MPT FC Host driver 3.04.13
Fusion MPT SAS Host driver 3.04.13
Fusion MPT misc device (ioctl) driver 3.04.13
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.13
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:0b.0: setting latency timer to 64
ehci_hcd 0000:00:0b.0: EHCI Host Controller
ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.0: irq 19, io mem 0xf0805000
ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.4-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
ohci_hcd 0000:00:06.0: setting latency timer to 64
ohci_hcd 0000:00:06.0: OHCI Host Controller
ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:06.0: irq 22, io mem 0xf0804000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.4-smp ohci_hcd
usb usb2: SerialNumber: 0000:00:06.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.00: 62914560 sectors, multi 128: LBA
ata1.01: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata1.01: 104857600 sectors, multi 128: LBA
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 62914560 512-byte logical blocks: (32.2 GB/30.0 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
scsi 2:0:1:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
sd 2:0:1:0: [sdb] 104857600 512-byte logical blocks: (53.6 GB/50.0 GiB)
sd 2:0:1:0: [sdb] Write Protect is off
sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:1:0: [sdb] Attached SCSI disk
scsi 3:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
registered taskstats version 1
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda1): mounted filesystem with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
devtmpfs: mounted
Freeing unused kernel memory: 636k freed
Write protecting the kernel text: 9564k
Write protecting the kernel read-only data: 2448k
usb 2-1: new full speed USB device using ohci_hcd and address 2
usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
usb 2-1: Product: USB Tablet
usb 2-1: Manufacturer: VirtualBox
hrtimer: interrupt took 3967860 ns
udev: starting version 153
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:1:0: Attached scsi generic sg1 type 0
sr 3:0:0:0: Attached scsi generic sg2 type 5
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input3
ACPI: Sleep Button [SLPF]
pci 0000:00:04.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
vboxguest: Successfully loaded version 3.2.8 (interface 0x00010004)
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:00:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
e1000 0000:00:03.0: setting latency timer to 64
rtc0: alarms up to one day, 114 bytes nvram
e1000: 0000:00:03.0: e1000_probe: (PCI:33MHz:32-bit) 08:00:27:cc:2d:1f
ACPI: AC Adapter [AC] (on-line)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
parport_pc 00:04: reported by Plug and Play ACPI
ppdev: user-space parallel port driver
usbcore: registered new interface driver hiddev
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
Intel ICH 0000:00:05.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
Intel ICH 0000:00:05.0: setting latency timer to 64
input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input5
generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Adding 1028152k swap on /dev/sda2. Priority:-1 extents:1 across:1028152k
fuse init (API version 7.13)
lp: driver loaded but no devices found
Linux agpgart interface v0.103
EXT4-fs (sda3): mounted filesystem with ordered data mode
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
vboxsf: Successfully loaded version 3.2.8 (interface 0x00010004)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
eth0: no IPv6 routers present
EXT4-fs (sdb1): mounted filesystem with ordered data mode
rubikblocks[1937]: segfault at b72087c0 ip b72087c0 sp bf85675c error 4 in libexpat.so.1.5.2[b7224000+1e000]

what's odd about this is I can play a video in Whaaw! and make it any size I want and it's fine, but if I make it full screen... it bogs down also

[damNageHack]

Sorry, I forgot to mention that you should probably execute those commands on the host system - not in the VBox machine.

[loukingjr]

Sorry, I forgot to mention that you should probably execute those commands on the host system - not in the VBox machine.

hmmm, will those commands work on a Mac host?

[loukingjr]

um, they don't

[damNageHack]

um, they don't

So you have to report that bug upstream to the developers of the Mac version. Have you tried Parallels instead of VBox, it should probably work much better on a Mac.
But that is out of scope here and really offtopic???

[loukingjr]

um, they don't

So you have to report that bug upstream to the developers of the Mac version. Have you tried Parallels instead of VBox, it should probably work much better on a Mac.
But that is out of scope here and really offtopic???

well, not sure it's a bug... I have 15 Linux guests running in Vbox, and have had more. Salix is the only one with this problem so far. but thanks.