what i mean by the last post that i didn't execute any command after upgrading the kernel { lilo , liloconfig, lilosetup } i rebooted directly then i faced a problem to boot salix . so i was trying some tips to save the situation . no luck i reinstall salix . but i try to install it using my prefer method every OS on a single ATA Drive ? and i succed and it works , here is lilo files and some others maybe it'll be useful for someone .
Code: Select all
root[zazlox]# cat /etc/lilo.conf
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
boot = /dev/sda
#compact # faster, but won't work on all systems.
# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/salix.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,20,255,20,255,20
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" (this is how many
# entries must be in the first column before the next begins to
# be used. We don't specify it here, as there's just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,29,0,255
# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
#message = /boot/boot_message.txt
# Append any additional kernel parameters:
append="quiet vt.default_utf8=1"
prompt
timeout = 50
# VESA framebuffer console @ 1024x768x64k
vga = 791
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0 # paranoia setting
# End LILO global section
# Linux bootable partition config begins
image = /boot/vmlinuz
root = /dev/sdb1
label = linux
read-only # Partitions should be mounted read-only for checking
# Linux bootable partition config ends
# Windows bootable partition config begins
other = /dev/sda1
label = windows
table = /dev/sda
# Windows bootable partition config ends
root[zazlox]#
Code: Select all
root[zazlox]# cat /etc/lilosetup.conf
# LILO configuration file
# Generated by LiloSetup
#
# Start LILO global section
# Append any additional kernel parameters:
append = "quiet vt.default_utf8=1 "
boot = /dev/sda
# Boot BMP Image.
# Bitmap in BMP format: 640x480x8
bitmap = /boot/salix.bmp
# Menu colors (foreground, background, shadow, highlighted
# foreground, highlighted background, highlighted shadow):
bmp-colors = 255,20,255,20,255,20
# Location of the option table: location x, location y, number of
# columns, lines per column (max 15), "spill" this is how many
# entries must be in the first column before the next begins to
# be used. We do not specify it here, as there is just one column.
bmp-table = 60,6,1,16
# Timer location x, timer location y, foreground color,
# background color, shadow color.
bmp-timer = 65,29,0,255
# Standard menu.
# Or, you can comment out the bitmap menu above and
# use a boot message with the standard menu:
# message = /boot/boot_message.txt
# Wait until the timeout to boot (if commented out, boot the
# first entry immediately):
prompt
# Timeout before the first entry boots.
# This is given in tenths of a second, so 600 for every minute:
timeout = 50
# Override dangerous defaults that rewrite the partition table:
change-rules
reset
# Normal VGA console
vga = normal
# VESA framebuffer console @ 1600x1200x64k
# vga=798
# VESA framebuffer console @ 1600x1200x32k
# vga=797
# VESA framebuffer console @ 1600x1200x256
# vga=796
# VESA framebuffer console @ 1280x1024x64k
# vga=794
# VESA framebuffer console @ 1280x1024x32k
# vga=793
# VESA framebuffer console @ 1280x1024x256
# vga=775
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
#
# LiloSetup can be executed from a LiveCD. This means that lilo
# could be issued from a 'chrooted' Linux partition, which would
# happen to be the first Linux partition listed below.
# Therefore the following paths are relevant only when viewed
# from that 'chrooted' partition's perspective. Please take this
# constraint into consideration if you must modify this file
# or else LiloSetup will fail.
#
# If later on you want to use this configuration file directly
# with lilo in a command line, use the following syntax:
# "lilo -v -C /etc/lilosetup/conf" instead of the traditional
# "lilo -v" command. You must of course issue that command from
# the operating system holding /etc/lilosetup.conf & ensure that
# all partitions referenced in it are mounted on the appropriate
# mountpoints.
#
# Windows bootable partition config begins
other = /dev/sda1
label = Windows
# Windows bootable partition config ends
#
# Linux bootable partition config begins
image = /boot/vmlinuz-huge-smp-2.6.37.6-smp
root = /dev/disk/by-uuid/f6240162-a5d7-4b7e-9ebe-2508cc5588b4
label = Salix
read-only
# Linux bootable partition config ends
root[zazlox]#
Code: Select all
root[zazlox]# cat /etc/fstab
/dev/sdb2 swap swap defaults 0 0
/dev/sdb1 / ext4 noatime,defaults 1 1
/dev/sdb3 /home ext4 defaults 1 2
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,users,rw,umask=00 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
root[zazlox]#
Code: Select all
root[zazlox]# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00024ecf
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 488394751 244093952 7 HPFS/NTFS/exFAT
Disk /dev/sdb: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000a314d
Device Boot Start End Blocks Id System
/dev/sdb1 63 81915434 40957686 83 Linux
/dev/sdb2 81915435 94205159 6144862+ 82 Linux swap
/dev/sdb3 94205160 488392064 197093452+ 83 Linux
Disk /dev/sdc: 2020 MB, 2020904448 bytes
63 heads, 62 sectors/track, 1010 cylinders, total 3947079 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xf9d9f9da
Device Boot Start End Blocks Id System
Disk /dev/sdd: 7743 MB, 7743995904 bytes
117 heads, 7 sectors/track, 18467 cylinders, total 15124992 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xc3072e18
Device Boot Start End Blocks Id System
/dev/sdd1 2048 15124479 7561216 b W95 FAT32
root[zazlox]#
now things are fine , a splash screen showing salix and windows , windows on /dev/sda , and salix on /dev/sdb
good ,
thanks again gapan for your help and support
