Does upgrading the kernel work the same way for Live? The only kernel package that seems to be installed is kernel-headers, for instance, yet the other kernel packages must surely be there, otherwise nothing would work at all ... Secondly, what about updating grub to reflect the new kernel? I don`t want to risk wiping the MBR on the hard disk and damaging the machine`s existing setup. I installed sg2conf and it failed, here is the log:
Code: Select all
root[one]# cat /var/log/sg2conf.log
sg2conf 1.1.14.1
fdisk -l output:
----begin----
Disk /dev/sdb: 4007 MB, 4007657472 bytes
255 heads, 63 sectors/track, 487 cylinders, total 7827456 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000c00fa
Device Boot Start End Blocks Id System
/dev/sdb1 * 63 7823654 3911796 b W95 FAT32
Disk /dev/sdc: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x68a46c8e
Device Boot Start End Blocks Id System
/dev/sdc1 63 80324 40131 de Dell Utility
/dev/sdc2 * 81920 31141887 15529984 7 HPFS/NTFS/exFAT
/dev/sdc3 31141888 976771071 472814592 7 HPFS/NTFS/exFAT
----end----
/etc/fstab:
----begin----
----end----
mount output:
----begin----
none on / type aufs (rw,relatime,si=99a6df05,noplink,nowarn_perm)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
gvfs-fuse-daemon on /home/one/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=one)
----end----
grub-probe: error: cannot stat `none'.
Couldn't determine the root device!