Page 1 of 1
[Solved] Okular cannot open file
Posted: 28. Jan 2013, 15:35
by Chaosphere
Hi to all.
I have a problem with okular, it can't open any pdf file. This is what I found in terminal when I run it from there and tried to open a pdf file:
Code: Select all
okular(5163) KSambaSharePrivate::testparmParamValue: We got some errors while running testparm "Load smb config files from /etc/samba/smb.conf
Error loading services.
"
okular(5163) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
okular(5163)/okular (app) Okular::DocumentPrivate::loadGeneratorLibrary: Invalid plugin factory for "okularGenerator_poppler"!
Any idea?
Re: Okular cannot open file
Posted: 28. Jan 2013, 16:02
by mimosa
Is the file on the same machine or are you trying to access it over a local network? If yes, what happens when you try to open a pdf on the same machine?
Re: Okular cannot open file
Posted: 28. Jan 2013, 16:12
by Chaosphere
The file is located in home folder. When I tried to open a file i get an error message saying that it is impossible to open the file:
Code: Select all
Impossibile aprire file:///home/sigur/allegatoordinamento-2013_1.pdf
Re: Okular cannot open file
Posted: 28. Jan 2013, 17:34
by laprjns
Sorry, no time to run down anything more than this. google
Okular::DocumentPrivate::loadGeneratorLibrary: Invalid plugin factory for "okularGenerator_poppler"!
http://www.google.com/search?q=okular%2 ... 65&bih=789
First few hits may give you some hints
Re: Okular cannot open file
Posted: 28. Jan 2013, 17:54
by djemos
Okular works fine here on salix-kde-4.8.5 and on slackel-kde-4.9.2.
On kde-4.8.5 okular version is 0.14.3.
Do you run salix-kde or another salix version where you have installed kde.
Maybe it is a policy problem. Or a missing or old library. poppler ? here are the dep files for okular (acl,attica,attr,bzip2,chmlib,cups,djvulibre,ebook-tools,expat,fontconfig,freetype,gamin,gcc,cxxlibs|gcc-g++, ghostscript, giflib, glib2, herqq, kdelibs, lcms, libICE, libSM, libX11, libXau, libXcursor, libXdmcp, libXext, libXfixes, libXft, libXi,libXpm,libXrender,libXtst,libdbusmenu-qt,libidn,libjpeg,libpng,libspectre,libtiff,libxcb,libxml2,libzip,openssl-solibs|openssl, pcre, phonon, poppler, qca, qimageblitz, qt,soprano,strigi,udev,utempter,util-linux,xz,zlib)
Give more details about your system.
Also what version of lcms and lcms2, you have installed in your system? (lcms-1.19-x86_64-2.txz, lcms2-2.3-x86_64-1.txz for slackware 14.0)
(lcms-1.19-x86_64-2.txz, lcms2-2.4-x86_64-1.txz for slackware current)
Re: Okular cannot open file
Posted: 28. Jan 2013, 18:27
by Chaosphere
djemos wrote:Okular works fine here on salix-kde-4.8.5 and on slackel-kde-4.9.2.
On kde-4.8.5 okular version is 0.14.3.
Do you run salix-kde or another salix version where you have installed kde.
Maybe it is a policy problem. Or a missing or old library. poppler ? here are the dep files for okular (acl,attica,attr,bzip2,chmlib,cups,djvulibre,ebook-tools,expat,fontconfig,freetype,gamin,gcc,cxxlibs|gcc-g++, ghostscript, giflib, glib2, herqq, kdelibs, lcms, libICE, libSM, libX11, libXau, libXcursor, libXdmcp, libXext, libXfixes, libXft, libXi,libXpm,libXrender,libXtst,libdbusmenu-qt,libidn,libjpeg,libpng,libspectre,libtiff,libxcb,libxml2,libzip,openssl-solibs|openssl, pcre, phonon, poppler, qca, qimageblitz, qt,soprano,strigi,udev,utempter,util-linux,xz,zlib)
Give more details about your system.
Also what version of lcms and lcms2, you have installed in your system? (lcms-1.19-x86_64-2.txz, lcms2-2.3-x86_64-1.txz for slackware 14.0)
(lcms-1.19-x86_64-2.txz, lcms2-2.4-x86_64-1.txz for slackware current)
I' m running Salix-KDE with KDE 4.8.5 on 64 bit.
lcms is 1.19 and lcms2 is 2.3 installed. Which more details do you need?
All deps are installed.
Re: Okular cannot open file
Posted: 28. Jan 2013, 20:02
by djemos
Then i don't know what is wrong. Here on salix64-kde-4.8.5 okular runs fine.
Re: Okular cannot open file
Posted: 28. Jan 2013, 23:33
by laprjns
I installed it on my Salix 14.0 Xfce and it seems to work. It did pull in 17 dependencies
Code: Select all
1/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ attica 0.4.0-i486-1 [212.0kB]...Done
2/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ chmlib 0.40-i486-2 [36.0kB]...Done
3/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ ebook-tools 0.2.1-i486-1 [24.0kB]...Done
4/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ herqq 1.0.0-i486-1 [408.0kB]...Done
5/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ libdbusmenu-qt 0.9.2-i486-2 [140.0kB]...Done
6/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ polkit-qt-1 0.103.0-i486-1 [72.0kB]...Done
7/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ qca 2.0.2-i486-1 [540.0kB]...Done
8/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ clucene 2.3.3.4-i486-1 [644.0kB]...Done
9/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ raptor2 2.0.8-i486-1 [320.0kB]...Done
10/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ rasqal 0.9.29-i486-1 [280.0kB]...Done
11/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ libaio 0.3.109-i486-1 [16.0kB]...Done
12/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ mysql 5.5.29-i486-1_slack14.0 [8.3MB]...Done
13/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ redland 1.0.15-i486-4 [284.0kB]...Done
14/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ soprano 2.7.6-i486-1 [608.0kB]...Done
15/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ strigi 0.7.7-i486-2 [652.0kB]...Done
16/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ kdelibs 4.8.5-i486-1 [12.2MB]...Done
17/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ qimageblitz 0.0.6-i486-1 [68.0kB]...Done
18/18 Get http://ftp.gwdg.de/pub/linux/slackware/slackware-14.0/ okular 4.8.5-i486-1 [1.3MB]...Done
The google search that I provide a link to has several hits that had the same error message. (Okular::DocumentPrivate::loadGeneratorLibrary: Invalid plugin factory for "okularGenerator_poppler"!). They all seem to point to a cofiguration issue with poppler. Maybe try reinstalling it.
Re: Okular cannot open file
Posted: 29. Jan 2013, 14:05
by Chaosphere
I tried to reinstall poppler but nothing happened. So I thought that reinstalling okular it might work, in that way I found that okular was not even installed, I don' t know how. So I installed okular trough slapt-get and now everything works.
Thank you.
However, my doubt is, why was okular not installed? The program started as it were installed.
