How to mount external USB-HDD ntfs-formatted

You have a problem with Salix? Post here and we'll do what we can to help.
User avatar
jpg153
Donor
Posts: 417
Joined: 23. Oct 2009, 15:43
Location: Marl/NRW/BRD/EU

How to mount external USB-HDD ntfs-formatted

Post by jpg153 » 10. Jan 2020, 15:04

Hi all,

all the best for 2020!

I just bought a portable HDD as backup for photos etc.
It uses an USB3-port and comes preformatted with NTFS.

I am a bit lost in finding a proper way to mount the drive to be able to push some files onto it.
It would be perfect to have it mounted all the time I plug it.

Any help is appreciated!

Thanks.
Regards Gruß
jpg

User avatar
gapan
Salix Wizard
Posts: 5607
Joined: 6. Jun 2009, 17:40

Re: How to mount external USB-HDD ntfs-formatted

Post by gapan » 10. Jan 2020, 19:48

As far as I know it should be recognized automatically.

Do you have ntfs-3g installed?

And what does dmesg show after you plug it in?
Image
Image

User avatar
jpg153
Donor
Posts: 417
Joined: 23. Oct 2009, 15:43
Location: Marl/NRW/BRD/EU

Re: How to mount external USB-HDD ntfs-formatted

Post by jpg153 » 12. Jan 2020, 09:04

Hi Gapan,

well, after a fresh start the system looks like this: (full output)

Code: Select all

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.190 (root@hive64.slackware.lan) (gcc version 5.5.0 (GCC) ) #1 SMP Mon Aug 26 15:57:46 CDT 2019
[    0.000000] Command line: auto BOOT_IMAGE=Salix-PartUUID ro quiet vt.default_utf8=1 root=PARTUUID=22e7fbee-01
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d376ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000d3770000-0x00000000d377ffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000d3780000-0x00000000d37cffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000d37d0000-0x00000000d37dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000d37eb400-0x00000000d3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022bffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./H55M-LE, BIOS P1.80 10/20/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x22c000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-EBFFF write-through
[    0.000000]   EC000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FE0000000 write-back
[    0.000000]   2 base 220000000 mask FF8000000 write-back
[    0.000000]   3 base 228000000 mask FFC000000 write-back
[    0.000000]   4 base 0D4000000 mask FFC000000 uncachable
[    0.000000]   5 base 0D8000000 mask FF8000000 uncachable
[    0.000000]   6 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xd4000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xd3770 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Base memory trampoline at [ffff880000096000] 96000 size 28672
[    0.000000] BRK [0x027c5000, 0x027c5fff] PGTABLE
[    0.000000] BRK [0x027c6000, 0x027c6fff] PGTABLE
[    0.000000] BRK [0x027c7000, 0x027c7fff] PGTABLE
[    0.000000] BRK [0x027c8000, 0x027c8fff] PGTABLE
[    0.000000] BRK [0x027c9000, 0x027c9fff] PGTABLE
[    0.000000] BRK [0x027ca000, 0x027cafff] PGTABLE
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FAA80 000014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 0x00000000D3770000 000040 (v01 102010 RSDT1543 20101020 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000D3770200 000084 (v01 A_M_I  OEMFACP  12000601 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000D3770460 006D06 (v01 AS342  AS342174 00000174 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000D3780000 000040
[    0.000000] ACPI: APIC 0x00000000D3770390 00008C (v01 102010 APIC1543 20101020 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000D3770420 00003C (v01 102010 OEMMCFG  20101020 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000D3780040 000072 (v01 102010 OEMB1543 20101020 MSFT 00000097)
[    0.000000] ACPI: AAFT 0x00000000D377A460 000027 (v01 102010 OEMAAFT  20101020 MSFT 00000097)
[    0.000000] ACPI: DMAR 0x00000000D37800C0 0000A8 (v01 AMI    OEMDMAR  00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000D3781AC0 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022bffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000d376ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000022bffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022bffffff]
[    0.000000] On node 0 totalpages: 2094861
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13470 pages used for memmap
[    0.000000]   DMA32 zone: 862064 pages, LIFO batch:31
[    0.000000]   Normal zone: 19200 pages used for memmap
[    0.000000]   Normal zone: 1228800 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd3770000-0xd377ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd3780000-0xd37cffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd37d0000-0xd37dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd37e0000-0xd37ebfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd37ec000-0xd3ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd4000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] e820: [mem 0xd4000000-0xfedfffff] available for PCI devices
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88022bc00000 s91288 r8192 d31592 u262144
[    0.000000] pcpu-alloc: s91288 r8192 d31592 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2062105
[    0.000000] Kernel command line: auto BOOT_IMAGE=Salix-PartUUID ro quiet vt.default_utf8=1 root=PARTUUID=22e7fbee-01
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:832 warn_invalid_dmar+0x79/0x90()
[    0.000000] Your BIOS is broken; DMAR reported at address fed93000 returns all ones!
               BIOS vendor: American Megatrends Inc.; Ver: P1.80; Product Version: To Be Filled By O.E.M.
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.190 #1
[    0.000000] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H55M-LE, BIOS P1.80 10/20/2010
[    0.000000]  0000000000000000 ffffffff82403d80 ffffffff81624a19 ffffffff82403dc8
[    0.000000]  ffffffff8217e91f ffffffff82403db8 ffffffff81092de2 00000000fed93000
[    0.000000]  ffffffff8217e950 ffffffff827c401c ffffffff827c4060 ffffffff0000ffff
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff81624a19>] dump_stack+0x4d/0x64
[    0.000000]  [<ffffffff81092de2>] warn_slowpath_common+0x82/0xc0
[    0.000000]  [<ffffffff81092eb4>] warn_slowpath_fmt_taint+0x44/0x50
[    0.000000]  [<ffffffff825a869c>] ? __early_ioremap+0x13d/0x1bd
[    0.000000]  [<ffffffff825973b8>] ? __early_set_fixmap+0xac/0xef
[    0.000000]  [<ffffffff8172b489>] warn_invalid_dmar+0x79/0x90
[    0.000000]  [<ffffffff81c92d36>] dmar_validate_one_drhd+0x86/0xc0
[    0.000000]  [<ffffffff8172b12a>] dmar_walk_remapping_entries+0x2a/0x120
[    0.000000]  [<ffffffff825ccbe5>] detect_intel_iommu+0x54/0xd1
[    0.000000]  [<ffffffff81c92cb0>] ? sfi_check_table+0xe0/0xe0
[    0.000000]  [<ffffffff82586dbe>] pci_iommu_alloc+0x50/0x6c
[    0.000000]  [<ffffffff825970c5>] mem_init+0x9/0x3e
[    0.000000]  [<ffffffff8257fd61>] start_kernel+0x246/0x460
[    0.000000]  [<ffffffff8257f2fe>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff8257f468>] x86_64_start_kernel+0x168/0x176
[    0.000000] ---[ end trace d6a83e23162654cc ]---
[    0.000000] Memory: 8142236K/8379444K available (12926K kernel code, 1432K rwdata, 4696K rodata, 1428K init, 940K bss, 237208K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[    0.000000] NR_IRQS:16640 nr_irqs:488 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3212.966 MHz processor
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6425.93 BogoMIPS (lpj=3212966)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000011] ACPI: Core revision 20150930
[    0.004394] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.004415] Security Framework initialized
[    0.004424] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.004426] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.004633] Initializing cgroup subsys io
[    0.004637] Initializing cgroup subsys memory
[    0.004644] Initializing cgroup subsys devices
[    0.004647] Initializing cgroup subsys freezer
[    0.004649] Initializing cgroup subsys net_cls
[    0.004651] Initializing cgroup subsys perf_event
[    0.004654] Initializing cgroup subsys net_prio
[    0.004657] Initializing cgroup subsys pids
[    0.004673] CPU: Physical Processor ID: 0
[    0.004674] CPU: Processor Core ID: 0
[    0.004678] mce: CPU supports 9 MCE banks
[    0.004688] CPU0: Thermal monitoring enabled (TM1)
[    0.004694] process: using mwait in idle threads
[    0.004698] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.004699] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.004701] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.004703] Spectre V2 : Mitigation: Full generic retpoline
[    0.004704] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.004705] Speculative Store Bypass: Vulnerable
[    0.004706] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.005056] Freeing SMP alternatives memory: 44K
[    0.027297] ftrace: allocating 41643 entries in 163 pages
[    0.061230] DMAR: Host address width 36
[    0.061234] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.061241] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.061242] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.061250] DMAR: Failed to map dmar1
[    0.061291] DMAR: Parse DMAR table failure.
[    0.061677] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.172901] smpboot: CPU0: Intel(R) Core(TM) i3 CPU         550  @ 3.20GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.172934] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.172950] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.172953] ... version:                3
[    0.172954] ... bit width:              48
[    0.172955] ... generic registers:      4
[    0.172956] ... value mask:             0000ffffffffffff
[    0.172958] ... max period:             000000007fffffff
[    0.172959] ... fixed-purpose events:   3
[    0.172960] ... event mask:             000000070000000f
[    0.173256] x86: Booting SMP configuration:
[    0.173258] .... node  #0, CPUs:      #1 #2
[    0.178020] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.178103]  #3
[    0.180432] x86: Booted up 1 node, 4 CPUs
[    0.180436] smpboot: Total of 4 processors activated (25703.72 BogoMIPS)
[    0.182378] devtmpfs: initialized
[    0.184666] PM: Registering ACPI NVS region [mem 0xd3780000-0xd37cffff] (327680 bytes)
[    0.184737] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.184743] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.184833] xor: measuring software checksum speed
[    0.193893]    prefetch64-sse: 16784.000 MB/sec
[    0.203889]    generic_sse: 14344.000 MB/sec
[    0.203891] xor: using function: prefetch64-sse (16784.000 MB/sec)
[    0.203900] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.203902] pinctrl core: initialized pinctrl subsystem
[    0.204063] NET: Registered protocol family 16
[    0.206890] cpuidle: using governor ladder
[    0.210888] cpuidle: using governor menu
[    0.210957] ACPI: bus type PCI registered
[    0.210959] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.211011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.211013] PCI: not using MMCONFIG
[    0.211014] PCI: Using configuration type 1 for base access
[    0.234879] raid6: sse2x1   gen()  7882 MB/s
[    0.251875] raid6: sse2x1   xor()  6275 MB/s
[    0.268871] raid6: sse2x2   gen()  9296 MB/s
[    0.285862] raid6: sse2x2   xor()  7431 MB/s
[    0.302853] raid6: sse2x4   gen() 10507 MB/s
[    0.319850] raid6: sse2x4   xor()  8054 MB/s
[    0.319851] raid6: using algorithm sse2x4 gen() 10507 MB/s
[    0.319852] raid6: .... xor() 8054 MB/s, rmw enabled
[    0.319853] raid6: using ssse3x2 recovery algorithm
[    0.319896] ACPI: Added _OSI(Module Device)
[    0.319898] ACPI: Added _OSI(Processor Device)
[    0.319899] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.319900] ACPI: Added _OSI(Processor Aggregator Device)
[    0.321448] ACPI: Executed 1 blocks of module-level executable AML code
[    0.323291] ACPI: Dynamic OEM Table Load:
[    0.323299] ACPI: SSDT 0xFFFF880222A46000 001448 (v01 DpgPmm P001Ist  00000011 INTL 20051117)
[    0.323796] ACPI: Interpreter enabled
[    0.323812] ACPI: (supports S0 S1 S3 S4 S5)
[    0.323813] ACPI: Using IOAPIC for interrupt routing
[    0.323833] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.324432] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.324437] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[    0.324633] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.329960] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.329966] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.330098] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.330162] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.330164] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.330166] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.330168] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.330358] PCI host bridge to bus 0000:00
[    0.330360] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.330362] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.330364] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.330366] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.330368] pci_bus 0000:00: root bus resource [mem 0xd4000000-0xdfffffff window]
[    0.330369] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.330371] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.330379] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[    0.330399] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.330457] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[    0.330485] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.330518] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.330567] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.330591] pci 0000:00:1a.0: reg 0x10: [mem 0xf9ef8000-0xf9ef83ff]
[    0.330653] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.330697] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.330730] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.330752] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef4000-0xf9ef7fff 64bit]
[    0.330802] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.330867] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.330920] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.330958] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.330990] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.331044] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.331079] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.331108] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.331161] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.331196] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.331229] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.331253] pci 0000:00:1d.0: reg 0x10: [mem 0xf9efa000-0xf9efa3ff]
[    0.331315] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.331358] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.331387] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.331450] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.331480] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[    0.331623] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[    0.331643] pci 0000:00:1f.2: reg 0x10: [io  0xc880-0xc887]
[    0.331649] pci 0000:00:1f.2: reg 0x14: [io  0xc800-0xc803]
[    0.331655] pci 0000:00:1f.2: reg 0x18: [io  0xc480-0xc487]
[    0.331662] pci 0000:00:1f.2: reg 0x1c: [io  0xc400-0xc403]
[    0.331668] pci 0000:00:1f.2: reg 0x20: [io  0xc080-0xc09f]
[    0.331675] pci 0000:00:1f.2: reg 0x24: [mem 0xf9efc000-0xf9efc7ff]
[    0.331700] pci 0000:00:1f.2: PME# supported from D3hot
[    0.331757] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.331771] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[    0.331788] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.331881] pci 0000:05:00.0: [10de:0de1] type 00 class 0x030000
[    0.331898] pci 0000:05:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[    0.331907] pci 0000:05:00.0: reg 0x14: [mem 0xd8000000-0xdfffffff 64bit pref]
[    0.331915] pci 0000:05:00.0: reg 0x1c: [mem 0xd6000000-0xd7ffffff 64bit pref]
[    0.331921] pci 0000:05:00.0: reg 0x24: [io  0xec00-0xec7f]
[    0.331928] pci 0000:05:00.0: reg 0x30: [mem 0xfbf00000-0xfbf7ffff pref]
[    0.331989] pci 0000:05:00.1: [10de:0bea] type 00 class 0x040300
[    0.332005] pci 0000:05:00.1: reg 0x10: [mem 0xfbffc000-0xfbffffff]
[    0.332092] pci 0000:00:01.0: PCI bridge to [bus 05]
[    0.332094] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.332096] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.332099] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[    0.332131] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.332139] pci 0000:00:1c.0:   bridge window [mem 0xd5f00000-0xd5ffffff 64bit pref]
[    0.332194] pci 0000:02:00.0: [1912:0014] type 00 class 0x0c0330
[    0.332260] pci 0000:02:00.0: reg 0x10: [mem 0xf9ffe000-0xf9ffffff 64bit]
[    0.332410] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.333861] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.333866] pci 0000:00:1c.4:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.333915] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.333951] pci 0000:01:00.0: reg 0x10: [io  0xd800-0xd8ff]
[    0.333977] pci 0000:01:00.0: reg 0x18: [mem 0xd5eff000-0xd5efffff 64bit pref]
[    0.333993] pci 0000:01:00.0: reg 0x20: [mem 0xd5ef8000-0xd5efbfff 64bit pref]
[    0.334055] pci 0000:01:00.0: supports D1 D2
[    0.334057] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.335852] pci 0000:00:1c.5: PCI bridge to [bus 01]
[    0.335856] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.335862] pci 0000:00:1c.5:   bridge window [mem 0xd5e00000-0xd5efffff 64bit pref]
[    0.335916] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.335924] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.335925] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.335927] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.335929] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.335931] pci 0000:00:1e.0:   bridge window [mem 0xd4000000-0xdfffffff window] (subtractive decode)
[    0.335932] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.335951] pci_bus 0000:00: on NUMA node 0
[    0.336498] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.336538] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.336575] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.336613] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.336652] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.336691] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.336730] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.336769] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.336810] ACPI: Enabled 4 GPEs in block 00 to 3F
[    0.336893] vgaarb: setting as boot device: PCI:0000:05:00.0
[    0.336895] vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.336897] vgaarb: loaded
[    0.336898] vgaarb: bridge control possible 0000:05:00.0
[    0.336978] SCSI subsystem initialized
[    0.337019] libata version 3.00 loaded.
[    0.337024] ACPI: bus type USB registered
[    0.337039] usbcore: registered new interface driver usbfs
[    0.337047] usbcore: registered new interface driver hub
[    0.337061] usbcore: registered new device driver usb
[    0.337146] PCI: Using ACPI for IRQ routing
[    0.342115] PCI: Discovered peer bus ff
[    0.342116] PCI: root bus ff: using default resources
[    0.342118] PCI: Probing PCI hardware (bus ff)
[    0.342137] PCI host bridge to bus 0000:ff
[    0.342139] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.342141] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.342143] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.342146] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.342150] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
[    0.342185] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.342222] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.342254] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.342287] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.342320] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.342359] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.342361] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.342364] PCI: pci_cache_line_size set to 64 bytes
[    0.342401] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[    0.342402] e820: reserve RAM buffer [mem 0xd3770000-0xd3ffffff]
[    0.342549] amd_nb: Cannot enumerate AMD northbridges
[    0.342562] clocksource: Switched to clocksource refined-jiffies
[    0.350140] pnp: PnP ACPI init
[    0.350216] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.350218] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.350220] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.350222] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.350226] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.350284] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.350585] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.350587] system 00:02: [io  0x0800-0x087f] has been reserved
[    0.350589] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.350591] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.350593] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.350595] system 00:02: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.350598] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.350692] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.350694] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.350697] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.350737] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.350876] system 00:05: [io  0x0290-0x029f] has been reserved
[    0.350879] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.350944] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.350947] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.351114] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.351117] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.351118] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.351120] system 00:07: [mem 0x00100000-0xd3ffffff] could not be reserved
[    0.351122] system 00:07: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.351125] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.351215] pnp: PnP ACPI: found 8 devices
[    0.357006] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.357018] clocksource: Switched to clocksource acpi_pm
[    0.357040] pci 0000:00:1c.4: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.357043] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.357056] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357058] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.357060] pci 0000:00:1c.4: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357062] pci 0000:00:1c.4: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.357069] pci 0000:00:1c.4: BAR 15: assigned [mem 0xd4000000-0xd41fffff 64bit pref]
[    0.357071] pci 0000:00:1c.4: BAR 13: assigned [io  0x1000-0x1fff]
[    0.357074] pci 0000:00:01.0: PCI bridge to [bus 05]
[    0.357077] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.357080] pci 0000:00:01.0:   bridge window [mem 0xfa000000-0xfbffffff]
[    0.357082] pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xdfffffff 64bit pref]
[    0.357085] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.357091] pci 0000:00:1c.0:   bridge window [mem 0xd5f00000-0xd5ffffff 64bit pref]
[    0.357095] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.357098] pci 0000:00:1c.4:   bridge window [io  0x1000-0x1fff]
[    0.357101] pci 0000:00:1c.4:   bridge window [mem 0xf9f00000-0xf9ffffff]
[    0.357104] pci 0000:00:1c.4:   bridge window [mem 0xd4000000-0xd41fffff 64bit pref]
[    0.357109] pci 0000:00:1c.5: PCI bridge to [bus 01]
[    0.357111] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.357117] pci 0000:00:1c.5:   bridge window [mem 0xd5e00000-0xd5efffff 64bit pref]
[    0.357121] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.357131] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.357132] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.357134] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.357136] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.357138] pci_bus 0000:00: resource 8 [mem 0xd4000000-0xdfffffff window]
[    0.357139] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.357141] pci_bus 0000:05: resource 0 [io  0xe000-0xefff]
[    0.357143] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff]
[    0.357144] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xdfffffff 64bit pref]
[    0.357146] pci_bus 0000:03: resource 2 [mem 0xd5f00000-0xd5ffffff 64bit pref]
[    0.357148] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.357150] pci_bus 0000:02: resource 1 [mem 0xf9f00000-0xf9ffffff]
[    0.357151] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd41fffff 64bit pref]
[    0.357153] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.357155] pci_bus 0000:01: resource 2 [mem 0xd5e00000-0xd5efffff 64bit pref]
[    0.357157] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.357158] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.357160] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.357162] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.357163] pci_bus 0000:04: resource 8 [mem 0xd4000000-0xdfffffff window]
[    0.357165] pci_bus 0000:04: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.357168] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.357169] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.357199] NET: Registered protocol family 2
[    0.357344] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.357439] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.357613] TCP: Hash tables configured (established 65536 bind 65536)
[    0.357640] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.357664] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.357726] NET: Registered protocol family 1
[    0.357788] RPC: Registered named UNIX socket transport module.
[    0.357790] RPC: Registered udp transport module.
[    0.357791] RPC: Registered tcp transport module.
[    0.357792] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.358101] pci 0000:05:00.0: Video device with shadowed ROM
[    0.358113] pci 0000:00:1c.4: enabling device (0106 -> 0107)
[    0.358239] PCI: CLS 32 bytes, default 64
[    0.358287] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.358289] software IO TLB: mapped [mem 0xcf770000-0xd3770000] (64MB)
[    0.359207] audit: initializing netlink subsys (disabled)
[    0.359216] audit: type=2000 audit(1578821301.224:1): initialized
[    0.359337] Initialise system trusted keyring
[    0.360833] VFS: Disk quotas dquot_6.6.0
[    0.360863] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.361245] NFS: Registering the id_resolver key type
[    0.361250] Key type id_resolver registered
[    0.361251] Key type id_legacy registered
[    0.361255] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.361388] ntfs: driver 2.1.32 [Flags: R/W].
[    0.361429] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.361484] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.362645] SGI XFS with ACLs, security attributes, no debug enabled
[    0.362998] ocfs2: Registered cluster interface o2cb
[    0.363072] OCFS2 User DLM kernel interface loaded
[    0.364712] async_tx: api initialized (async)
[    0.364749] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.364776] io scheduler noop registered
[    0.364779] io scheduler deadline registered
[    0.364787] io scheduler cfq registered (default)
[    0.365238] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.365245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.365260] intel_idle: MWAIT substates: 0x1120
[    0.365261] intel_idle: v0.4.1 model 0x25
[    0.365262] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.365412] GHES: HEST is not enabled!
[    0.366482] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.366790] hpet_acpi_add: no address or irqs in _CRS
[    0.369086] brd: module loaded
[    0.369091] HP CISS Driver (v 3.6.26)
[    0.369553] fnic: Cisco FCoE HBA Driver, ver 1.6.0.17a
[    0.369570] fnic: Successfully Initialized Trace Buffer
[    0.369602] fnic: Successfully Initialized FC_CTLR Trace Buffer
[    0.369784] Adaptec aacraid driver 1.2-1[41010]-ms
[    0.369799] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.369885] scsi: <fdomain> Detection failed (no card)
[    0.369903] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.26-k.
[    0.369914] Emulex LightPulse Fibre Channel SCSI driver 11.0.0.0.
[    0.369915] Copyright(c) 2004-2015 Emulex.  All rights reserved.
[    0.369951] Brocade BFA FC/FCOE SCSI driver - version: 3.2.23.0
[    0.370003] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    0.370037] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    0.370050] megasas: 06.808.16.00-rc1
[    0.370065] mpt3sas version 09.102.00.00 loaded
[    0.370126] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    0.370152] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    0.370161] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    0.370171] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    0.370182] ipr: IBM Power RAID SCSI Device Driver version: 2.6.3 (October 17, 2015)
[    0.370195] RocketRAID 3xxx/4xxx Controller driver v1.10.0
[    0.370204] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    0.370255] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.370363] ahci 0000:00:1f.2: version 3.0
[    0.370519] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.381156] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.381165] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag led clo pio slum part ems sxs apst 
[    0.391763] scsi host0: ahci
[    0.392073] scsi host1: ahci
[    0.392405] scsi host2: ahci
[    0.392627] scsi host3: ahci
[    0.392786] scsi host4: ahci
[    0.392923] scsi host5: ahci
[    0.392969] ata1: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc100 irq 25
[    0.392972] ata2: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc180 irq 25
[    0.392974] ata3: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc200 irq 25
[    0.392976] ata4: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc280 irq 25
[    0.392977] ata5: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc300 irq 25
[    0.392979] ata6: SATA max UDMA/133 abar m2048@0xf9efc000 port 0xf9efc380 irq 25
[    0.393793] scsi host6: pata_legacy
[    0.393830] ata7: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
[    0.696996] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.699508] ata1.00: ATA-8: OCZ-VERTEX2, 1.29, max UDMA/133
[    0.699510] ata1.00: 117231408 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    0.709497] ata1.00: configured for UDMA/133
[    1.360964] tsc: Refined TSC clocksource calibration: 3212.614 MHz
[    1.360971] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e4ed62c7bd, max_idle_ns: 440795260225 ns
[    2.361134] clocksource: Switched to clocksource tsc
[    3.380916] floppy0: no floppy controllers found
[    3.381531] scsi 0:0:0:0: Direct-Access     ATA      OCZ-VERTEX2      1.29 PQ: 0 ANSI: 5
[    3.381746] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    3.381811] sd 0:0:0:0: [sda] Write Protect is off
[    3.381814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.381831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.395315]  sda: sda1 sda2 sda3 < sda5 >
[    3.395750] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.686734] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.688479] ata2.00: supports DRM functions and may not be fully accessible
[    3.688924] ata2.00: ATA-9: Samsung SSD 750 EVO 250GB, MAT01B6Q, max UDMA/133
[    3.688929] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    3.689804] ata2.00: supports DRM functions and may not be fully accessible
[    3.690677] ata2.00: configured for UDMA/133
[    3.691097] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 750  1B6Q PQ: 0 ANSI: 5
[    3.691599] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    3.692085] sd 1:0:0:0: [sdb] Write Protect is off
[    3.692092] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.692217] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.693279]  sdb: sdb1 < sdb5 >
[    3.694057] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.995702] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.996434] ata3.00: ATAPI: TSSTcorpDVD-ROM SH-D163B, SB03, max UDMA/33
[    3.998178] ata3.00: configured for UDMA/33
[    4.000591] scsi 2:0:0:0: CD-ROM            TSSTcorp DVD-ROM SH-D163B SB03 PQ: 0 ANSI: 5
[    4.023446] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/32x cd/rw xa/form2 cdda tray
[    4.023451] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.023647] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    4.328663] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.331893] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS70, EX00, max UDMA/100
[    4.336194] ata4.00: configured for UDMA/100
[    4.344783] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS70  EX00 PQ: 0 ANSI: 5
[    4.374285] sr 3:0:0:0: [sr1] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.374542] sr 3:0:0:0: Attached scsi CD-ROM sr1
[    4.679627] ata5: SATA link down (SStatus 0 SControl 300)
[    4.984590] ata6: SATA link down (SStatus 0 SControl 300)
[    4.985383] scsi host7: pata_legacy
[    4.985458] ata8: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
[    5.137056] Fusion MPT base driver 3.04.20
[    5.137060] Copyright (c) 1999-2008 LSI Corporation
[    5.137070] Fusion MPT SPI Host driver 3.04.20
[    5.137104] Fusion MPT FC Host driver 3.04.20
[    5.137138] Fusion MPT SAS Host driver 3.04.20
[    5.137159] Fusion MPT misc device (ioctl) driver 3.04.20
[    5.137188] mptctl: Registered with Fusion MPT base driver
[    5.137192] mptctl: /dev/mptctl @ (major,minor=10,220)
[    5.137198] Fusion MPT LAN driver 3.04.20
[    5.137309] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    5.137312] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    5.138050] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.138201] mousedev: PS/2 mouse device common for all mice
[    5.138258] rtc_cmos 00:01: RTC can wake from S4
[    5.138419] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    5.138447] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[    5.138463] md: linear personality registered for level -1
[    5.138469] md: raid0 personality registered for level 0
[    5.138474] md: raid1 personality registered for level 1
[    5.138478] md: raid10 personality registered for level 10
[    5.138578] md: raid6 personality registered for level 6
[    5.138582] md: raid5 personality registered for level 5
[    5.138585] md: raid4 personality registered for level 4
[    5.138593] md: multipath personality registered for level -4
[    5.138644] device-mapper: uevent: version 1.0.3
[    5.138712] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    5.138915] input: Speakup as /devices/virtual/input/input1
[    5.138959] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    5.139000] speakup 3.1.6: initialized
[    5.139001] synth name on entry is: (null)
[    5.139233] Initializing XFRM netlink socket
[    5.139239] NET: Registered protocol family 17
[    5.139265] 9pnet: Installing 9P2000 support
[    5.139283] Key type dns_resolver registered
[    5.139449] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2
[    5.139454] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2
[    5.139459] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x2
[    5.139465] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x2
[    5.139487] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    5.139593] registered taskstats version 1
[    5.139598] Loading compiled-in X.509 certificates
[    5.139909] Btrfs loaded
[    5.140122] Key type encrypted registered
[    5.164753] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    5.164964] md: Waiting for all devices to be available before autodetect
[    5.164968] md: If you don't use raid, use raid=noautodetect
[    5.165229] md: Autodetecting RAID arrays.
[    5.165232] md: Scanned 0 and added 0 devices.
[    5.165234] md: autorun ...
[    5.165236] md: ... autorun DONE.
[    5.179016] UDF-fs: warning (device sda1): udf_fill_super: No partition found (2)
[    5.179882] XFS (sda1): Mounting V4 Filesystem
[    5.206086] XFS (sda1): Ending clean mount
[    5.206111] VFS: Mounted root (xfs filesystem) readonly on device 8:1.
[    5.206822] devtmpfs: mounted
[    5.208112] Freeing unused kernel memory: 1428K
[    5.208114] Write protecting the kernel read-only data: 20480k
[    5.208542] Freeing unused kernel memory: 1400K
[    5.210994] Freeing unused kernel memory: 1448K
[    5.315313] loop: module loaded
[    5.490771] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.490835] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.491270] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.491316] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.491365] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.491394] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.566117] udevd[576]: starting eudev-3.1.5
[    5.572310] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.572323] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.572338] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.572363] random: udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy available)
[    5.631388] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[    5.631396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.631400] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052F (\GPR2) (20150930/utaddress-254)
[    5.631404] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.631478] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.632900] Linux agpgart interface v0.103
[    5.633293] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.633681] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.634286] ehci-pci: EHCI PCI platform driver
[    5.634462] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    5.634604] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.634615] ehci-pci 0000:00:1a.0: debug port 2
[    5.638514] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    5.639169] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf9ef8000
[    5.639245] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    5.639252] ACPI: Power Button [PWRB]
[    5.639310] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    5.639313] ACPI: Power Button [PWRF]
[    5.642821] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    5.644750] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    5.644794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.644797] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.644800] usb usb1: Product: EHCI Host Controller
[    5.644802] usb usb1: Manufacturer: Linux 4.4.190 ehci_hcd
[    5.644804] usb usb1: SerialNumber: 0000:00:1a.0
[    5.644958] hub 1-0:1.0: USB hub found
[    5.644968] hub 1-0:1.0: 6 ports detected
[    5.645294] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    5.645351] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.645364] ehci-pci 0000:00:1d.0: debug port 2
[    5.649258] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    5.649288] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf9efa000
[    5.654449] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.654489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.654492] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.654493] usb usb2: Product: EHCI Host Controller
[    5.654495] usb usb2: Manufacturer: Linux 4.4.190 ehci_hcd
[    5.654497] usb usb2: SerialNumber: 0000:00:1d.0
[    5.654602] hub 2-0:1.0: USB hub found
[    5.654608] hub 2-0:1.0: 8 ports detected
[    5.655004] snd_hda_intel 0000:05:00.1: Disabling MSI
[    5.655008] snd_hda_intel 0000:05:00.1: Handle vga_switcheroo audio client
[    5.666791] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    5.667006] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    5.668166] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.668180] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.668637] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0xffffc9000000e000, bc:5f:f4:03:2b:a2, XID 081000c0 IRQ 27
[    5.668641] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    5.669641] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1818S: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line
[    5.669645] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.669648] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[    5.669650] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    5.669652] snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x0
[    5.669654] snd_hda_codec_via hdaudioC0D0:    inputs:
[    5.669658] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[    5.669660] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[    5.669663] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[    5.672056] ipmi message handler version 39.2
[    5.672428] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x00000410
[    5.672616] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    5.672619] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.672621] usb usb3: Product: xHCI Host Controller
[    5.672622] usb usb3: Manufacturer: Linux 4.4.190 xhci-hcd
[    5.672624] usb usb3: SerialNumber: 0000:02:00.0
[    5.672729] hub 3-0:1.0: USB hub found
[    5.672741] hub 3-0:1.0: 4 ports detected
[    5.672863] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    5.672898] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    5.676503] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.676533] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    5.676536] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.676539] usb usb4: Product: xHCI Host Controller
[    5.676541] usb usb4: Manufacturer: Linux 4.4.190 xhci-hcd
[    5.676543] usb usb4: SerialNumber: 0000:02:00.0
[    5.676669] hub 4-0:1.0: USB hub found
[    5.676682] hub 4-0:1.0: 4 ports detected
[    5.679014] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    5.679600] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    5.679646] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    5.679685] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    5.679721] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    5.679755] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    5.679788] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    5.683702] [drm] Initialized drm 1.1.0 20060810
[    5.723374] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    5.806206] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    5.876161] nvidia: loading out-of-tree module taints kernel.
[    5.876169] nvidia: module license 'NVIDIA' taints kernel.
[    5.876171] Disabling lock debugging due to kernel taint
[    5.892643] nvidia-nvlink: Nvlink Core is being initialized, major device number 241
[    5.892992] vgaarb: device changed decodes: PCI:0000:05:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    5.893081] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.129  Mon Jul 22 21:10:21 PDT 2019 (using threaded interrupts)
[    5.901524] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.129  Tue Jul 23 00:29:03 PDT 2019
[    5.903368] [drm] [nvidia-drm] [GPU ID 0x00000500] Loading driver
[    5.946456] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.957486] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    6.060951] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    6.060958] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.061385] hub 1-1:1.0: USB hub found
[    6.061565] hub 1-1:1.0: 6 ports detected
[    6.071814] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    6.071821] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.072140] hub 2-1:1.0: USB hub found
[    6.072318] hub 2-1:1.0: 8 ports detected
[    6.150090] fuse init (API version 7.23)
[    6.335375] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[    6.347412] usb 2-1.6: new low-speed USB device number 3 using ehci-pci
[    6.421331] usb 1-1.3: not running at top speed; connect to a high speed hub
[    6.423999] usb 1-1.3: New USB device found, idVendor=058f, idProduct=6364
[    6.424006] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.424011] usb 1-1.3: Product: Mass Storage Device
[    6.424015] usb 1-1.3: Manufacturer: Generic
[    6.424019] usb 1-1.3: SerialNumber: 058F63646476
[    6.427767] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c404
[    6.427774] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.427779] usb 2-1.6: Product: Trackball
[    6.427783] usb 2-1.6: Manufacturer: Logitech
[    6.463556] hidraw: raw HID events driver (C) Jiri Kosina
[    6.463584] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[    6.463681] scsi host8: usb-storage 1-1.3:1.0
[    6.463807] usbcore: registered new interface driver usb-storage
[    6.464532] usbcore: registered new interface driver uas
[    6.470078] usbcore: registered new interface driver usbhid
[    6.470080] usbhid: USB HID core driver
[    6.471659] hid-generic 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:1a.0-1.3/input1
[    6.471838] input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C404.0002/input/input14
[    6.471934] hid-generic 0003:046D:C404.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.0-1.6/input0
[    6.974252] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input10
[    6.974444] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input11
[    6.974620] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input12
[    6.974802] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:05:00.1/sound/card1/input13
[    7.465397] scsi 8:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    7.467040] scsi 8:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    7.469973] scsi 8:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    7.471866] sd 8:0:0:1: [sdd] Attached SCSI removable disk
[    7.473202] scsi 8:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    7.485947] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    7.493202] sd 8:0:0:2: [sde] Attached SCSI removable disk
[    7.497200] sd 8:0:0:3: [sdf] Attached SCSI removable disk
[    9.717745] XFS (sdb5): Mounting V5 Filesystem
[    9.740567] XFS (sdb5): Ending clean mount
[    9.764819] XFS (sda5): Mounting V5 Filesystem
[    9.806683] XFS (sda5): Ending clean mount
[    9.825758] zram: Added device: zram0
[    9.826313] zram: Added device: zram1
[    9.827496] zram: Added device: zram2
[    9.828393] zram: Added device: zram3
[    9.833417] zram: Added device: zram4
[    9.834715] zram0: detected capacity change from 0 to 1073741824
[    9.853967] XFS (zram0): Mounting V5 Filesystem
[    9.855484] XFS (zram0): Ending clean mount
[    9.868431] zram1: detected capacity change from 0 to 268435456
[    9.875283] Adding 262140k swap on /dev/zram1.  Priority:100 extents:1 across:262140k SS
[    9.877419] zram2: detected capacity change from 0 to 268435456
[    9.881244] Adding 262140k swap on /dev/zram2.  Priority:100 extents:1 across:262140k SS
[    9.883296] zram3: detected capacity change from 0 to 268435456
[    9.888976] Adding 262140k swap on /dev/zram3.  Priority:100 extents:1 across:262140k SS
[    9.890816] zram4: detected capacity change from 0 to 268435456
[    9.895661] Adding 262140k swap on /dev/zram4.  Priority:100 extents:1 across:262140k SS
[   10.399319] random: nonblocking pool is initialized
[   11.481350] NET: Registered protocol family 10
[   11.486951] NET: Registered protocol family 4
[   11.489743] NET: Registered protocol family 3
[   11.492609] NET: Registered protocol family 5
[   13.183858] vboxdrv: Found 4 processor cores
[   13.202812] vboxdrv: TSC mode is Invariant, tentative frequency 3212705985 Hz
[   13.202815] vboxdrv: Successfully loaded version 5.2.34 (interface 0x00290001)
[   13.408903] VBoxNetFlt: Successfully started.
[   13.411255] VBoxNetAdp: Successfully started.
[   13.413993] VBoxPciLinuxInit
[   13.416221] vboxpci: IOMMU not found (not registered)
[   17.230483] r8169 0000:01:00.0 eth0: link down
[   17.230539] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.884317] r8169 0000:01:00.0 eth0: link up
[   19.884331] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   22.258031] r8169 0000:01:00.0 eth0: link down
[   22.258091] r8169 0000:01:00.0 eth0: link down
[   22.258107] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.364027] r8169 0000:01:00.0 eth0: link down
[   22.364088] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.452907] r8169 0000:01:00.0 eth0: link up
[   25.452923] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
After I read your post yesterday late, I plugged in the external HDD but then went to bed without doing anything on the matter.
This morning the device was there and ready... :?:
I could transfer some files onto it and all seems fine.
Now after a reboot, the external HDD is active but not showing up.
However, before detaching for the reboot, the dmesg-output was something like this (shortend):

Code: Select all

...
[489904.192137] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
...
[490091.547275] usb 3-1: new high-speed USB device number 84 using xhci_hcd
...
[491195.745936] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
...
501887.244079] usb 3-1: new high-speed USB device number 60 using xhci_hcd
[501887.364421] usb 3-1: New USB device found, idVendor=0480, idProduct=0900
[501887.364424] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[501887.364427] usb 3-1: Product: External USB 3.0
[501887.364430] usb 3-1: Manufacturer: TOSHIBA
[501887.364432] usb 3-1: SerialNumber: 20190711018456F
[501887.366100] usb-storage 3-1:1.0: USB Mass Storage device detected
[501887.369077] scsi host12: usb-storage 3-1:1.0
[501888.374455] scsi 12:0:0:0: Direct-Access     TOSHIBA  External USB 3.0 5438 PQ: 0 ANSI: 6
[501888.377060] sd 12:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16).
[501888.377288] sd 12:0:0:0: [sdg] 7814037164 512-byte logical blocks: (4.00 TB/3.64 TiB)
[501888.377292] sd 12:0:0:0: [sdg] 4096-byte physical blocks
[501888.377663] sd 12:0:0:0: [sdg] Write Protect is off
[501888.377667] sd 12:0:0:0: [sdg] Mode Sense: 23 00 00 00
[501888.378027] sd 12:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[501888.379770] sd 12:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16).
[501895.067541]  sdg: sdg1 sdg2
[501895.069827] sd 12:0:0:0: [sdg] Very big device. Trying to use READ CAPACITY(16).
[501895.073101] sd 12:0:0:0: [sdg] Attached SCSI disk
Now, maybe the size is a problem when trying to mount?

Thanks in advance.
Regards Gruß
jpg

DidierSpaier
Posts: 331
Joined: 20. Jun 2016, 20:15

Re: How to mount external USB-HDD ntfs-formatted

Post by DidierSpaier » 12. Jan 2020, 09:45

This device's size is 3.64 TiB. How big are its partitions? Does it have a dos partition table or a GPT?

User avatar
jpg153
Donor
Posts: 417
Joined: 23. Oct 2009, 15:43
Location: Marl/NRW/BRD/EU

Re: How to mount external USB-HDD ntfs-formatted

Post by jpg153 » 12. Jan 2020, 11:59

Hi,

there is just 1 partition/volume.
Windows says its a primary partition, NTFS formatted, 3725,9GB.
GPT-Partition.

Thanks
Regards Gruß
jpg

DidierSpaier
Posts: 331
Joined: 20. Jun 2016, 20:15

Re: How to mount external USB-HDD ntfs-formatted

Post by DidierSpaier » 12. Jan 2020, 12:50

I am puzzled as dmesg output indicates that two partitions are found:

Code: Select all

[501895.067541]  sdg: sdg1 sdg2
What is the output of lsblk, 30 seconds after having plugged in the drive?

User avatar
jpg153
Donor
Posts: 417
Joined: 23. Oct 2009, 15:43
Location: Marl/NRW/BRD/EU

Re: How to mount external USB-HDD ntfs-formatted

Post by jpg153 » 12. Jan 2020, 19:20

Hi Didier,

sorry, but even after hours the device does not show up at all.
It remains unmounted.

I don't know what happened last nite so it was mounted this morning. But now, even after more than 3 hours, its not mounted at all.
The HDD-LED keeps flickering, but nothing happens.

Thanks
Regards Gruß
jpg

User avatar
gapan
Salix Wizard
Posts: 5607
Joined: 6. Jun 2009, 17:40

Re: How to mount external USB-HDD ntfs-formatted

Post by gapan » 12. Jan 2020, 19:34

Can you post what

Code: Select all

sudo lsblk
says after plugging it in?

Although, I think that it might just be this:

Code: Select all

[489904.192137] usb usb4-port1: Cannot enable. Maybe the USB cable is bad?
And it just so happened that after some time, with maybe some wiggling, it finally connected during the night.

Partition size shouldn't be a problem in any case.
Image
Image

User avatar
jpg153
Donor
Posts: 417
Joined: 23. Oct 2009, 15:43
Location: Marl/NRW/BRD/EU

Re: How to mount external USB-HDD ntfs-formatted

Post by jpg153 » 12. Jan 2020, 20:18

ok,

there seems to be a problem with the USB3.0-board.
I plugged the HDD into a standard-USB-port (onboard) and within seconds it shows up:

Code: Select all

jpg[~]$ lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0  55,9G  0 disk 
├─sda1   8:1    0  18,8G  0 part /
├─sda2   8:2    0  10,8G  0 part /salix32
└─sda5   8:5    0  26,4G  0 part /reserve
sdb      8:16   0 232,9G  0 disk 
└─sdb5   8:21   0 232,9G  0 part /home
sdg      8:96   0   3,7T  0 disk 
├─sdg1   8:97   0   128M  0 part 
└─sdg2   8:98   0   3,7T  0 part /run/media/jpg/TOSHIBA EXT
sr0     11:0    1  1024M  0 rom  
sr1     11:1    1  1024M  0 rom  
zram0  250:0    0     1G  0 disk /tmp
zram1  250:1    0   256M  0 disk [SWAP]
zram2  250:2    0   256M  0 disk [SWAP]
zram3  250:3    0   256M  0 disk [SWAP]
zram4  250:4    0   256M  0 disk [SWAP]
sdg1 is shown in gparted with "Microsoft reserved partition"
Type is: msftres

So, I think besides the sdg1/sdg2 question, the other q is: what is going on with the USB-3.0 board?

lspci shows:

Code: Select all

jpg[~]$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation H55 Chipset LPC Interface Controller (rev 06)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
02:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)
05:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
05:00.1 Audio device: NVIDIA Corporation GF108 High Definition Audio Controller (rev a1)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 05)
Thanks
Regards Gruß
jpg

User avatar
gapan
Salix Wizard
Posts: 5607
Joined: 6. Jun 2009, 17:40

Re: How to mount external USB-HDD ntfs-formatted

Post by gapan » 12. Jan 2020, 23:08

The first partition is probably a partition that includes software for windows PCs, so I wouldn't worry about it.

The USB 3.0 board could just be broken. Do you have other devices that you can connect to it? Do they work properly?

Or maybe it's the hard drive's USB3 circuitry that doesn't work properly while the USB2 circuitry works fine. You'll need to test with other PCs with both USB2 and USB3 ports to find out I guess.
Image
Image

Post Reply