For me the game is over with salix64 15.0
[ 0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
....bla bla bla....
[ 0.000000] DMI: ASUS All Series/H81M-A, BIOS 2203 05/26/2015
....bla bla bla....
[ 0.017331] smpboot: CPU0: Intel(R) Pentium(R) CPU G3220 @ 3.00GHz (family: 0x6, model: 0x3c, stepping: 0x3)
....bla bla bla....
[ 0.361732] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[ 0.361735] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20170728/utaddress-247)
[ 0.361738] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.361740] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.361742] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.361744] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.361744] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 0.361746] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 0.361747] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.361749] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.361751] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.361751] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 0.361753] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20170728/utaddress-247)
[ 0.361754] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.361756] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20170728/utaddress-247)
[ 0.361757] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.361758] lpc_ich: Resource conflict(s) found affecting gpio_ich
I used this good tutorial to load the microcode.
https://firasuke.github.io/DOTSLASHLINU ... ux-kernel/
it is necessary to let the new CPUs use their functionality.
but I am very happy with salix64 14.2 and a lot of salix 15.0 build its compatible.
PS:it was very hard to find information, red Hat enterprise linux 9.0 (kernel 5.14) certified only intel gen12 and Suse linux enterprise just says that you have to choose the version according to the cpu but without any info.