After entering the password to run the Lilo Setup, there is a black screen. To get back in session, I click Alt+Ctrl+F*-F7.
Black screen: Unable to handle kernel paging... [OK]
Black screen: Unable to handle kernel paging... [OK]
Salix OS 13.37 i486 Xfce.
After entering the password to run the Lilo Setup, there is a black screen. To get back in session, I click Alt+Ctrl+F*-F7.
After entering the password to run the Lilo Setup, there is a black screen. To get back in session, I click Alt+Ctrl+F*-F7.
Last edited by Andyun on 9. Jun 2012, 16:54, edited 3 times in total.
Re: Black screen: Unable to handle kernel paging...
Is this always reproducible on this machine? Can you reproduce it on other machines?
This indicates a problem with your hardware as I don't know of any other user with such a problem. Of course, it could be also a kernel bug specific to your hardware, but I consider that unprobable. Please test your memory with memtest86+. Leave it running for some hours or over night and report back if there were any errors.
This indicates a problem with your hardware as I don't know of any other user with such a problem. Of course, it could be also a kernel bug specific to your hardware, but I consider that unprobable. Please test your memory with memtest86+. Leave it running for some hours or over night and report back if there were any errors.
Re: Black screen: Unable to handle kernel paging...
So occurs always. No other machine. Memory is OK. Anything similar was not earlier.
Re: Black screen: Unable to handle kernel paging...
You can't have tested your memory properly with memtest within less than an hour. You must leave it running much longer.
Something else you can try is disabling additional kernel modules, which weren't originally shipped with the kernel. Like nvidia, ati or vbox drivers.
Run this command as root:
Now copy the content of the file dmesg.log in the same directory into your posts and wrap it with 'Code'-Tags.
Something else you can try is disabling additional kernel modules, which weren't originally shipped with the kernel. Like nvidia, ati or vbox drivers.
Run this command as root:
Code: Select all
dmesg > dmesg.logRe: Black screen: Unable to handle kernel paging...
Code: Select all
Apr 9 2011 23:32:52) installed
[ 0.415576] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.415835] NTFS driver 2.1.29 [Flags: R/W].
[ 0.416037] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 0.416246] JFS: nTxBlock = 7884, nTxLock = 63077
[ 0.419846] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[ 0.420568] SGI XFS Quota Management subsystem
[ 0.420577] OCFS2 1.5.0
[ 0.420763] ocfs2: Registered cluster interface o2cb
[ 0.420853] ocfs2: Registered cluster interface user
[ 0.420855] OCFS2 DLMFS 1.5.0
[ 0.420949] OCFS2 User DLM kernel interface loaded
[ 0.420951] OCFS2 Node Manager 1.5.0
[ 0.421088] OCFS2 DLM 1.5.0
[ 0.421414] Btrfs loaded
[ 0.421822] GFS2 (built Apr 9 2011 23:33:12) installed
[ 0.421831] msgmni has been set to 1718
[ 0.422606] async_tx: api initialized (async)
[ 0.422672] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.422692] io scheduler noop registered
[ 0.422694] io scheduler deadline registered
[ 0.422720] io scheduler cfq registered (default)
[ 0.423039] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.423226] intel_idle: MWAIT substates: 0x1110
[ 0.423229] intel_idle: does not run on family 6 model 22
[ 0.423285] ERST: Table is not found!
[ 0.423302] isapnp: Scanning for PnP cards...
[ 0.780285] isapnp: No Plug & Play device found
[ 0.783903] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.784825] Floppy drive(s): fd0 is 1.44M
[ 3.795149] floppy0: no floppy controllers found
[ 3.797273] brd: module loaded
[ 3.798330] loop: module loaded
[ 3.798332] Compaq SMART2 Driver (v 2.6.0)
[ 3.798401] HP CISS Driver (v 3.6.26)
[ 3.798989] Loading iSCSI transport class v2.0-870.
[ 3.799431] fnic: Cisco FCoE HBA Driver, ver 1.4.0.145
[ 3.801245] Adaptec aacraid driver 1.1-5[26400]-ms
[ 3.801547] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 3.801814] scsi: <fdomain> Detection failed (no card)
[ 3.801825] sym53c416.c: Version 1.0.0-ac
[ 3.801849] qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
[ 3.801906] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[ 3.802071] iscsi: registered transport (qla4xxx)
[ 3.802111] QLogic iSCSI HBA Driver
[ 3.802113] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[ 3.802115] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 3.802160] Brocade BFA FC/FCOE SCSI driver - version: 2.3.2.0
[ 3.824037] Failed initialization of WD-7000 SCSI card!
[ 3.876734] DC390: clustering now enabled by default. If you get problems load
[ 3.876736] with "disable_clustering=1" and report to maintainers
[ 3.876814] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.876884] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.876920] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[ 3.876964] mpt2sas version 06.100.00.00 loaded
[ 3.877095] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 3.877194] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 3.877229] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 3.877265] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[ 3.877301] ipr: IBM Power RAID SCSI Device Driver version: 2.5.1 (August 10, 2010)
[ 3.877344] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
[ 3.877378] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[ 3.877518] st: Version 20100829, fixed bufsize 32768, s/g segs 256
[ 3.877962] ata_piix 0000:00:1f.1: version 2.13
[ 3.877979] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.878045] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 3.878648] scsi2 : ata_piix
[ 3.878803] scsi3 : ata_piix
[ 3.879401] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 3.879405] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 3.879430] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.879436] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 3.879703] ata2: port disabled. ignoring.
[ 4.030040] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 4.030864] scsi4 : ata_piix
[ 4.030974] scsi5 : ata_piix
[ 4.031499] ata3: SATA max UDMA/133 cmd 0x6eb0 ctl 0x6eb8 bmdma 0x6ee0 irq 17
[ 4.031507] ata4: SATA max UDMA/133 cmd 0x6ec0 ctl 0x6ec8 bmdma 0x6ee8 irq 17
[ 4.033744] I2O subsystem v1.325
[ 4.033746] i2o: max drivers = 8
[ 4.033861] I2O Configuration OSM v1.323
[ 4.033890] I2O Bus Adapter OSM v1.317
[ 4.033918] I2O Block Device OSM v1.325
[ 4.034192] I2O SCSI Peripheral OSM v1.316
[ 4.034221] I2O ProcFS OSM v1.316
[ 4.034256] Fusion MPT base driver 3.04.17
[ 4.034257] Copyright (c) 1999-2008 LSI Corporation
[ 4.034264] Fusion MPT SPI Host driver 3.04.17
[ 4.034307] Fusion MPT FC Host driver 3.04.17
[ 4.034351] Fusion MPT SAS Host driver 3.04.17
[ 4.034393] Fusion MPT misc device (ioctl) driver 3.04.17
[ 4.034480] mptctl: Registered with Fusion MPT base driver
[ 4.034483] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 4.034485] Fusion MPT LAN driver 3.04.17
[ 4.034586] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.034625] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.034649] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.034653] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.034747] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.034790] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.038666] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 4.038693] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 4.048008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.048029] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.048032] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.048035] usb usb1: Product: EHCI Host Controller
[ 4.048037] usb usb1: Manufacturer: Linux 2.6.37.6-smp ehci_hcd
[ 4.048040] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.048202] hub 1-0:1.0: USB hub found
[ 4.048208] hub 1-0:1.0: 4 ports detected
[ 4.048349] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.048365] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.048370] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.048443] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.048482] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.052371] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 4.052762] ata1.00: ATAPI: TSSTcorp DVD+/-RW TS-L632H, DW30, max UDMA/33
[ 4.052948] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 4.063009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.063047] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.063050] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.063052] usb usb2: Product: EHCI Host Controller
[ 4.063055] usb usb2: Manufacturer: Linux 2.6.37.6-smp ehci_hcd
[ 4.063057] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.063220] hub 2-0:1.0: USB hub found
[ 4.063225] hub 2-0:1.0: 6 ports detected
[ 4.063416] 116x: driver isp116x-hcd, 03 Nov 2005
[ 4.063446] driver isp1362-hcd, 2005-04-04
[ 4.063475] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.063521] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.063575] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.063585] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.063589] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.063667] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.063701] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 4.063742] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.063745] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.063747] usb usb3: Product: UHCI Host Controller
[ 4.063750] usb usb3: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 4.063752] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.063911] hub 3-0:1.0: USB hub found
[ 4.063916] hub 3-0:1.0: 2 ports detected
[ 4.064061] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.064069] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.064073] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.064149] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.064192] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 4.064229] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.064232] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.064235] usb usb4: Product: UHCI Host Controller
[ 4.064237] usb usb4: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 4.064239] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.064406] hub 4-0:1.0: USB hub found
[ 4.064411] hub 4-0:1.0: 2 ports detected
[ 4.064550] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.064558] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.064563] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.064634] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.064667] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 4.064705] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.064708] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.064710] usb usb5: Product: UHCI Host Controller
[ 4.064713] usb usb5: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 4.064715] usb usb5: SerialNumber: 0000:00:1d.0
[ 4.064867] hub 5-0:1.0: USB hub found
[ 4.064872] hub 5-0:1.0: 2 ports detected
[ 4.064999] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.065040] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.065045] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.065123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.065155] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 4.065193] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.065196] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.065198] usb usb6: Product: UHCI Host Controller
[ 4.065200] usb usb6: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 4.065203] usb usb6: SerialNumber: 0000:00:1d.1
[ 4.065357] hub 6-0:1.0: USB hub found
[ 4.065362] hub 6-0:1.0: 2 ports detected
[ 4.065489] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 4.065497] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.065501] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.065574] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.065607] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 4.065646] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.065649] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.065652] usb usb7: Product: UHCI Host Controller
[ 4.065654] usb usb7: Manufacturer: Linux 2.6.37.6-smp uhci_hcd
[ 4.065656] usb usb7: SerialNumber: 0000:00:1d.2
[ 4.065810] hub 7-0:1.0: USB hub found
[ 4.065815] hub 7-0:1.0: 2 ports detected
[ 4.066050] sl811: driver sl811-hcd, 19 May 2005
[ 4.066081] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 4.066247] Initializing USB Mass Storage driver...
[ 4.066313] usbcore: registered new interface driver usb-storage
[ 4.066315] USB Mass Storage support registered.
[ 4.066350] usbcore: registered new interface driver ums-alauda
[ 4.066384] usbcore: registered new interface driver ums-cypress
[ 4.066419] usbcore: registered new interface driver ums-datafab
[ 4.066453] usbcore: registered new interface driver ums-freecom
[ 4.066489] usbcore: registered new interface driver ums-isd200
[ 4.066523] usbcore: registered new interface driver ums-jumpshot
[ 4.066560] usbcore: registered new interface driver ums-karma
[ 4.066595] usbcore: registered new interface driver ums-onetouch
[ 4.066634] usbcore: registered new interface driver ums-sddr09
[ 4.066669] usbcore: registered new interface driver ums-sddr55
[ 4.066704] usbcore: registered new interface driver ums-usbat
[ 4.066824] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.082861] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.083877] ata1.00: configured for UDMA/33
[ 4.094402] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.094488] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.094533] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.094537] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.094540] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.094834] mice: PS/2 mouse device common for all mice
[ 4.094921] md: linear personality registered for level -1
[ 4.094923] md: raid0 personality registered for level 0
[ 4.094925] md: raid1 personality registered for level 1
[ 4.094927] md: raid10 personality registered for level 10
[ 4.094930] md: raid6 personality registered for level 6
[ 4.094931] md: raid5 personality registered for level 5
[ 4.094933] md: raid4 personality registered for level 4
[ 4.094935] md: multipath personality registered for level -4
[ 4.095964] device-mapper: uevent: version 1.0.3
[ 4.096351] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 4.096454] cpuidle: using governor ladder
[ 4.096456] cpuidle: using governor menu
[ 4.096533] input: Speakup as /devices/virtual/input/input0
[ 4.096568] speakup 3.1.6: initialized
[ 4.096575] synth name on entry is: (null)
[ 4.096636] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 4.096727] TCP cubic registered
[ 4.096730] Initializing XFRM netlink socket
[ 4.096741] NET: Registered protocol family 17
[ 4.096764] Registering the dns_resolver key type
[ 4.096784] Using IPI No-Shortcut mode
[ 4.098871] scsi 2:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L632H DW30 PQ: 0 ANSI: 5
[ 4.110258] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.110263] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.110428] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 4.245674] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 4.555009] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 4.715318] usb 6-1: New USB device found, idVendor=09da, idProduct=000a
[ 4.715321] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.715324] usb 6-1: Product: PS/2+USB Mouse
[ 4.715326] usb 6-1: Manufacturer: A4Tech
[ 4.792108] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.792127] ata3.01: SATA link down (SStatus 0 SControl 300)
[ 4.795414] ata3.00: ATA-8: Hitachi HTS542512K9SA00, BB2OC39P, max UDMA/133
[ 4.795417] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 4.801409] ata3.00: configured for UDMA/133
[ 4.801529] scsi 4:0:0:0: Direct-Access ATA Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
[ 4.801775] sd 4:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 4.801825] sd 4:0:0:0: [sda] Write Protect is off
[ 4.801829] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.801851] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.828625] sda: sda1 sda2
[ 4.828921] sd 4:0:0:0: [sda] Attached SCSI disk
[ 5.343054] ata4.01: failed to resume link (SControl 0)
[ 5.343166] ata4.00: SATA link down (SStatus 0 SControl 300)
[ 5.343189] ata4.01: SATA link down (SStatus 0 SControl 0)
[ 5.343229] registered taskstats version 1
[ 5.343723] md: Waiting for all devices to be available before autodetect
[ 5.343725] md: If you don't use raid, use raid=noautodetect
[ 5.343927] md: Autodetecting RAID arrays.
[ 5.343929] md: Scanned 0 and added 0 devices.
[ 5.343931] md: autorun ...
[ 5.343932] md: ... autorun DONE.
[ 5.366134] EXT3-fs: barriers not enabled
[ 5.383538] kjournald starting. Commit interval 5 seconds
[ 5.383557] EXT3-fs (sda1): mounted filesystem with ordered data mode
[ 5.383568] VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
[ 5.414564] devtmpfs: mounted
[ 5.414582] Freeing unused kernel memory: 612k freed
[ 5.414875] Write protecting the kernel text: 10108k
[ 5.414909] Write protecting the kernel read-only data: 2540k
[ 6.550628] udev[1221]: starting version 165
[ 6.925438] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.042079] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.104096] cfg80211: Calling CRDA to update world regulatory domain
[ 7.202173] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 7.202275] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 7.423218] firewire_ohci 0000:02:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.476073] firewire_ohci: Added fw-ohci device 0000:02:09.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
[ 7.513988] Linux agpgart interface v0.103
[ 7.569879] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.581734] sdhci: Secure Digital Host Controller Interface driver
[ 7.581739] sdhci: Copyright(c) Pierre Ossman
[ 7.584623] sdhci-pci 0000:02:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 7.584649] sdhci-pci 0000:02:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 7.587430] Registered led device: mmc0::
[ 7.588517] mmc0: SDHCI controller on PCI [0000:02:09.1] using DMA
[ 7.593115] ACPI: AC Adapter [AC] (on-line)
[ 7.656971] usbcore: registered new interface driver usbhid
[ 7.656974] usbhid: USB HID core driver
[ 7.766184] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 7.767174] ACPI: Lid Switch [LID]
[ 7.767296] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 7.767379] ACPI: Power Button [PBTN]
[ 7.767866] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 7.767976] ACPI: Sleep Button [SBTN]
[ 7.795616] ACPI: Battery Slot [BAT0] (battery absent)
[ 7.838018] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 7.838108] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 7.838298] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 7.848258] sky2: driver version 1.28
[ 7.848326] sky2 0000:09:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.848344] sky2 0000:09:00.0: setting latency timer to 64
[ 7.848384] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 7.848519] sky2 0000:09:00.0: irq 40 for MSI/MSI-X
[ 7.851926] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 7.852614] sky2 0000:09:00.0: eth0: addr 00:1d:09:5e:7f:bc
[ 7.879140] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input5
[ 7.904153] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input6
[ 7.977118] firewire_core: created device fw0: GUID 464fc000153c6470, S400
[ 8.057802] rtc_cmos 00:04: RTC can wake from S4
[ 8.058374] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 8.058414] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 8.061196] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input7
[ 8.061480] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-1/input0
[ 8.076998] thermal LNXTHERM:00: registered as thermal_zone0
[ 8.077015] ACPI: Thermal Zone [THM] (49 C)
[ 8.083362] ACPI: acpi_idle registered with cpuidle
[ 8.098741] Monitor-Mwait will be used to enter C-1 state
[ 8.098779] Monitor-Mwait will be used to enter C-2 state
[ 8.098798] Monitor-Mwait will be used to enter C-3 state
[ 8.098803] Marking TSC unstable due to TSC halts in idle
[ 8.100902] Switching to clocksource hpet
[ 8.359542] wmi: Mapper loaded
[ 8.553924] [drm] Initialized drm 1.1.0 20060810
[ 8.562595] r852 0000:02:09.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 8.562679] r852: driver loaded succesfully
[ 8.584503] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 8.670571] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 8.670575] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 8.670674] iwl3945 0000:0b:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 8.670690] iwl3945 0000:0b:00.0: setting latency timer to 64
[ 8.738519] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 8.738601] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 8.738636] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.744184] iwl3945 0000:0b:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 8.744189] iwl3945 0000:0b:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 8.744341] iwl3945 0000:0b:00.0: irq 42 for MSI/MSI-X
[ 8.748307] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 8.904280] input: HDA Intel Line In at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.904461] input: HDA Intel Line In at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.904599] input: HDA Intel Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 8.904736] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 8.905270] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.905277] i915 0000:00:02.0: setting latency timer to 64
[ 8.945036] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 8.998978] composite sync not supported
[ 8.999261] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.999604] [drm] initialized overlay support
[ 8.999636] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[ 9.337212] composite sync not supported
[ 9.353660] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[ 9.356088] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[ 9.356091] [drm:intel_panel_get_max_backlight] *ERROR* fixme: max PWM is zero.
[ 9.360309] Console: switching to colour frame buffer device 160x50
[ 9.364624] fb0: inteldrmfb frame buffer device
[ 9.364626] drm: registered panic notifier
[ 9.377383] acpi device:30: registered as cooling_device1
[ 9.378426] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input13
[ 9.378566] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.378589] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 9.379034] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.582866] fuse init (API version 7.15)
[ 10.112322] EXT3-fs (sda1): using internal journal
[ 12.732573] lp: driver loaded but no devices found
[ 12.744278] ppdev: user-space parallel port driver
[ 12.798308] powernow: This module only works with AMD K7 CPUs
[ 12.831923] cpufreq-nforce2: No nForce2 chipset.
[ 16.271970] EXT3-fs: barriers not enabled
[ 16.272232] kjournald starting. Commit interval 5 seconds
[ 16.272554] EXT3-fs (sda2): using internal journal
[ 16.272558] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 21.371538] NET: Registered protocol family 10
[ 21.371785] lo: Disabled Privacy Extensions
[ 26.106886] composite sync not supported
[ 26.124108] composite sync not supported
[ 29.149073] sky2 0000:09:00.0: eth0: enabling interface
[ 29.149498] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.687758] composite sync not supported
[ 34.704236] composite sync not supported
[ 51.276719] mbcache: exports duplicate symbol mb_cache_entry_find_next (owned by kernel)
[ 51.279829] mbcache: exports duplicate symbol mb_cache_entry_find_next (owned by kernel)
[ 51.291961] jbd2: exports duplicate symbol jbd2_journal_restart (owned by kernel)
[ 51.327041] exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
[ 51.337819] JFS: nTxBlock = 7889, nTxLock = 63115
[ 51.345181] BUG: unable to handle kernel paging request at f85cecc0
[ 51.345243] IP: [<f85cecc0>] 0xf85cecc0
[ 51.345281] *pde = 3582a067 *pte = 00000000
[ 51.345324] Oops: 0000 [#1] SMP
[ 51.345358] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:09:00.0/net/eth0/carrier
[ 51.345419] Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ipv6 cpufreq_ondemand speedstep_lib freq_table mperf ppdev lp parport_pc parport fuse snd_hda_codec_idt i915 snd_hda_intel iwl3945 snd_hda_codec drm_kms_helper dell_wmi sparse_keymap r852 sm_common drm i2c_algo_bit video nand snd_hwdep wmi joydev snd_pcm iwlcore processor thermal rtc_cmos hid_a4tech thermal_sys nand_ids nand_ecc sky2 rtc_core intel_agp dell_laptop intel_gtt battery button rtc_lib usbhid hid ac sdhci_pci sdhci i2c_i801 mmc_core agpgart snd_timer mtd i2c_core output firewire_ohci firewire_core hwmon psmouse snd soundcore snd_page_alloc sg mac80211 cfg80211 shpchp serio_raw rfkill dcdbas evdev
[ 51.346010]
[ 51.346010] Pid: 2389, comm: jfsSync Not tainted 2.6.37.6-smp #2 Dell Inc. Dell 500 /0M916F
[ 51.346010] EIP: 0060:[<f85cecc0>] EFLAGS: 00010246 CPU: 0
[ 51.346010] EIP is at 0xf85cecc0
[ 51.346010] EAX: 00000000 EBX: f450beac ECX: 00000000 EDX: f5970cc0
[ 51.346010] ESI: 00000000 EDI: f85cecc0 EBP: f0597fe4 ESP: f0597fbc
[ 51.346010] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[ 51.346010] Process jfsSync (pid: 2389, ti=f0596000 task=f5970cc0 task.ti=f0596000)
[ 51.346010] Stack:
[ 51.346010] c105f4d4 00000000 00000000 00000000 00000000 f0597fd0 f0597fd0 00000000
[ 51.346010] c105f460 f450beac 00000000 c100367e 00000000 00000000 00000000 00000000
[ 51.346010] 00000000
[ 51.346010] Call Trace:
[ 51.346010] [<c105f4d4>] ? kthread+0x74/0x80
[ 51.346010] [<c105f460>] ? kthread+0x0/0x80
[ 51.346010] [<c100367e>] ? kernel_thread_helper+0x6/0x10
[ 51.346010] Code: Bad EIP value.
[ 51.346010] EIP: [<f85cecc0>] 0xf85cecc0 SS:ESP 0068:f0597fbc
[ 51.346010] CR2: 00000000f85cecc0
[ 51.346010] ---[ end trace 59514d87ad90d6aa ]---
[ 51.363125] fat: exports duplicate symbol fat_add_entries (owned by kernel)
[ 51.368107] fat: exports duplicate symbol fat_add_entries (owned by kernel)
[ 51.388551] NTFS driver 2.1.29 [Flags: R/W MODULE].
[ 51.388725] NTFS: Failed to register NTFS filesystem driver!
[ 51.440790] QNX4 filesystem 0.2.3 registered.
[ 51.479305] ------------[ cut here ]------------
[ 51.479318] WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0xb6/0x130()
[ 51.479321] Hardware name: Dell 500
[ 51.479323] sysfs: cannot create duplicate filename '/fs/btrfs'
[ 51.479325] Modules linked in: btrfs(+) ufs qnx4 hfsplus hfs minix snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ipv6 cpufreq_ondemand speedstep_lib freq_table mperf ppdev lp parport_pc parport fuse snd_hda_codec_idt i915 snd_hda_intel iwl3945 snd_hda_codec drm_kms_helper dell_wmi sparse_keymap r852 sm_common drm i2c_algo_bit video nand snd_hwdep wmi joydev snd_pcm iwlcore processor thermal rtc_cmos hid_a4tech thermal_sys nand_ids nand_ecc sky2 rtc_core intel_agp dell_laptop intel_gtt battery button rtc_lib usbhid hid ac sdhci_pci sdhci i2c_i801 mmc_core agpgart snd_timer mtd i2c_core output firewire_ohci firewire_core hwmon psmouse snd soundcore snd_page_alloc sg mac80211 cfg80211 shpchp serio_raw rfkill dcdbas evdev
[ 51.479385] Pid: 2414, comm: modprobe Tainted: G D 2.6.37.6-smp #2
[ 51.479387] Call Trace:
[ 51.479394] [<c1042972>] warn_slowpath_common+0x72/0xa0
[ 51.479397] [<c1150486>] ? sysfs_add_one+0xb6/0x130
[ 51.479400] [<c1150486>] ? sysfs_add_one+0xb6/0x130
[ 51.479403] [<c1042a43>] warn_slowpath_fmt+0x33/0x40
[ 51.479406] [<c1150486>] sysfs_add_one+0xb6/0x130
[ 51.479411] [<c114ff6b>] ? sysfs_new_dirent+0x5b/0x100
[ 51.479414] [<c1150561>] create_dir+0x61/0xb0
[ 51.479417] [<c1150651>] sysfs_create_dir+0x71/0xb0
[ 51.479422] [<c14e50ec>] kobject_add_internal+0x8c/0x200
[ 51.479426] [<c14ef0d3>] ? kvasprintf+0x43/0x60
[ 51.479429] [<c14e5807>] kset_register+0x27/0x60
[ 51.479432] [<c14e58b7>] kset_create_and_add+0x77/0x100
[ 51.479448] [<f9a65004>] ? btrfs_test_super+0x4/0x40 [btrfs]
[ 51.479468] [<f9a9815a>] btrfs_init_sysfs+0x1a/0x30 [btrfs]
[ 51.479482] [<f87ce00c>] init_btrfs_fs+0xc/0x89 [btrfs]
[ 51.479486] [<c1001235>] do_one_initcall+0x35/0x170
[ 51.479501] [<f87ce000>] ? init_btrfs_fs+0x0/0x89 [btrfs]
[ 51.479505] [<c107777b>] sys_init_module+0x10b/0x18b0
[ 51.479524] [<c19dd5ac>] syscall_call+0x7/0xb
[ 51.479527] ---[ end trace 59514d87ad90d6ab ]---
[ 51.479531] kobject_add_internal failed for btrfs with -EEXIST, don't try to register things with the same name in the same directory.
[ 51.479535] Pid: 2414, comm: modprobe Tainted: G D W 2.6.37.6-smp #2
[ 51.479537] Call Trace:
[ 51.479539] [<c19daa01>] ? printk+0x1d/0x1f
[ 51.479543] [<c14e51cf>] kobject_add_internal+0x16f/0x200
[ 51.479546] [<c14e5807>] kset_register+0x27/0x60
[ 51.479550] [<c14e58b7>] kset_create_and_add+0x77/0x100
[ 51.479564] [<f9a65004>] ? btrfs_test_super+0x4/0x40 [btrfs]
[ 51.479582] [<f9a9815a>] btrfs_init_sysfs+0x1a/0x30 [btrfs]
[ 51.479597] [<f87ce00c>] init_btrfs_fs+0xc/0x89 [btrfs]
[ 51.479600] [<c1001235>] do_one_initcall+0x35/0x170
[ 51.479614] [<f87ce000>] ? init_btrfs_fs+0x0/0x89 [btrfs]
[ 51.479617] [<c107777b>] sys_init_module+0x10b/0x18b0
[ 51.479633] [<c19dd5ac>] syscall_call+0x7/0xb
[ 106.130693] composite sync not supported
[ 135.009980] sky2 0000:09:00.0: eth0: Link is up at 10 Mbps, half duplex, flow control none
[ 135.009980] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 138.994173] sky2 0000:09:00.0: eth0: Link is down
[ 140.432996] sky2 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 145.810045] eth0: no IPv6 routers present
[ 218.116543] sky2 0000:09:00.0: eth0: disabling interface
[ 218.123460] sky2 0000:09:00.0: eth0: enabling interface
[ 218.124446] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 218.141160] sky2 0000:09:00.0: eth0: disabling interface
[ 218.158181] sky2 0000:09:00.0: eth0: enabling interface
[ 218.158380] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 219.625001] sky2 0000:09:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 219.625001] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 230.194046] eth0: no IPv6 routers present
Re: Black screen: Unable to handle kernel paging...
I had the exact same experience a couple days ago with the combo lilosetup/salix-13.37 and an asus AK6 laptop.
No problems on other machines.
Lilosetup on latest Gparted LiveCD does not bug on that machine.
Lilosetup with previous version of Salix did not bug on that machine.
I'm not in front of that machine ATM, but from memory & looking at your screen, some line are very similar if not identical. Particularly regarding the modules linked and jfsyc not tainted, etc...
I'll look at this closer tomorrow & report back.
No problems on other machines.
Lilosetup on latest Gparted LiveCD does not bug on that machine.
Lilosetup with previous version of Salix did not bug on that machine.
I'm not in front of that machine ATM, but from memory & looking at your screen, some line are very similar if not identical. Particularly regarding the modules linked and jfsyc not tainted, etc...
I'll look at this closer tomorrow & report back.
What really matters is where you are going, not where you come from.
Re: Black screen: Unable to handle kernel paging...
Then I suggest trying different kernels (newer/older), e.g. the one from 13.1.
@Andyun: What hardware is causing the problems for you? Why is there another backtrace in your kernel log (related to ?btrfs?)?
@Andyun: What hardware is causing the problems for you? Why is there another backtrace in your kernel log (related to ?btrfs?)?
Re: Black screen: Unable to handle kernel paging...
I do not use btrfs, I use ext3. This is related with os-prober (I tried 1.42 and 1.47), because without os-prober the Lilo Setup (I tried 0.2.7 and 0.2.8) is runs without problems.
I have no problems with the hardware.
I have no problems with the hardware.
Re: Black screen: Unable to handle kernel paging...
Yes it is caused by os-prober here too. And I use Salix 64-bit.
Here is the strace output for os-prober:
http://pastealacon.com/27890
Here is the strace output for os-prober:
http://pastealacon.com/27890
What really matters is where you are going, not where you come from.