Audio

[gapan]

Hi xman, it's a bit unclear what you're trying to say... You don't specify what your problem is. And it would have been better if you had started your own post about your problem. Anyway...

Hi.
All they have to run after startup:

Code: Select all

modprobe snd-sb16

Code: Select all

alsamixer

So getting live sound card.
There is a solution to the OS automatically load the driver?

Do you mean that it works for you if you run the modprobe command? If it does, then you can add the same command somewhere (anywhere) in your /etc/rc.d/rc.modules. Alternatively in your /etc/rc.d/rc.local.

Unfortunately, this failed to help.

Since you're not stating what your problem is, it's hard to figure out how to solve it. Do you have multiple sound cards? Do you have a single soundcard with no output? What kind of soundcard is that?

[xman]

I can not speak English. I use the google translator. Sorry.

No default sound card. SoundBlaster16 old ISA. Yes. I have to run "modprobe snd-sb16" command for PC at startup, when I want to sound.

Code: Select all

root[ikszman]# cat /proc/asound/cards
 0 [S16            ]: SB16 - Sound Blaster 16
                      Sound Blaster 16 at 0x220, irq 5, dma 1&3

How do I do this:

If it does, then you can add the same command somewhere (anywhere) in your /etc/rc.d/rc.modules. Alternatively in your /etc/rc.d/rc.local.

Thank you for your response.

[gapan]

Code: Select all

sudo leafpad /etc/rc.d/rc.modules

add line, save, exit and reboot.

[xman]

Hi.
But, do not go.
I feel that the Alsa Mixer will be the problem here.

[gapan]

I don't understand. Does the soundcard work if you run modprobe snd-sb16 manually or not? Alsamixer is just a mixer, nothing more than that.

[xman]

The problem is solved!
I entered here: /etc/rc.d/rc.local

Code: Select all

modprobe snd-sb16
alsactl restore

And here: /etc/rc.d/rc.local_shutdown

Code: Select all

alsactl store

So perfectly alsa loaded the saved settings.
Thank you for your help. Good luck.