I was used to used to use (in former times and other distros) "Exec :Quit" in the keys file to leave fluxbox. Now, that still does have an effect but it brings me into a nirwana: a black screen without anything, no console, nothing but the computer still running.
I see in Salix there is this nice tool 'wm-logout' (very confortable!!!) but using the logout button in it has exactly the same result as above.
What's going wrong here (i checked in the terminal but i see no help or options or settings for wm-logout)?
PS. I checked and the consoles (ALT-CTRL-F1 thru F6 and F7 )work as expected.
wm-logout or :Quit end into nirwana
Re: wm-logout or :Quit end into nirwana
The problem is most probably slim, which you have replaced gdm with, if I remember correctly...
Re: wm-logout or :Quit end into nirwana
No!gapan wrote:The problem is most probably slim, which you have replaced gdm with, if I remember correctly...
Since you're advice i went back to gdm ... (found a nice enough black and even slackware specific background
). And its happening here, with gdm as display/login manager . . . (?)PS. I realized that wm-logout is a nice tool which gives suspend/hibernate access also to the user (not only root)
PS2. I presume CTRL-ALT-Delete does not the same as logout (?). Otherwise one could try to play around using xdotool ...
Re: wm-logout or :Quit end into nirwana
I tried a bit more around that problem:jsfarinet wrote:No!gapan wrote:The problem is most probably slim, which you have replaced gdm with, if I remember correctly...
Since you're advice i went back to gdm ... (found a nice enough black and even slackware specific background
PS. I realized that wm-logout is a nice tool which gives suspend/hibernate access also to the user (not only root)
PS2. I presume CTRL-ALT-Delete does not the same as logout (?). Otherwise one could try to play around using xdotool ...
1. I installed lxdm as well, but the problem is still there.
2. Alt-Ctrl-Del brings the same result i.e. nirwana
Since i remembered that with slim the "Switch-User" did not work and not even wm-logout > logout, but Alt-Ctrl-Del brought to the login
3. i reactivated slim and tried that. But nothing, same as with the other two.
Now, since slim comes up a bit later than gdm, at least appears to me, i see there something loading i did not see before and that's something glx related which, so my idea, is connected to the installation of the fglrx (amd catalyst) driver. Might it be, sorry for my humble mind, that the session shutdown is unable to completely shutdown that and therefore it is unable to reach the console or any login?
Re: wm-logout or :Quit end into nirwana
How about in xterm
Actually in my fluxbox menu I have
Exit>Shutdown
which reads
Code: Select all
sudo /sbin/halt
Exit>Shutdown
which reads
Code: Select all
[exec] (Shutdown) {xterm -e sudo /sbin/halt}
Re: wm-logout or :Quit end into nirwana
The terminal commands work. But i would like to have a correct logout from the graphical desktop to the console.
But there seems to be something broken:
The consoles do not work like i expect: Ctrl+Alt+F1 brings to a console where are displayed the last actions of firefox (given i execute the command from within FF). But it should prompt me with darkstar login, i'd say. Since there is a blinking cursor i tried to login as user. Username is accepted, i'm asked for the password, pswd is accepted to. Doing startx does not work. I have to kill fluxbox manually before, the i reget the login manager window (whatsoever loginmanager i use).
Ctrl-Alt-F2 (and F3) work correctly.
Ctrl-Alt-F4 curiously brings back in the desktop window (i was used to have Ctrl-Alt-F7 before) (??)
Ctrl-Alt-F5 (- F7) bring to a dead window with only a blinking cursor.
(Moreover now, after installing catalyst, the resolution of the console is really ugly (640x480). Is there a way to change that, eventually configuring lilo?).
I post here the content of Xorg.0.log.old, may be someone of you knowledged gurus is able to see something:
Thanks in advance for reading!
But there seems to be something broken:
The consoles do not work like i expect: Ctrl+Alt+F1 brings to a console where are displayed the last actions of firefox (given i execute the command from within FF). But it should prompt me with darkstar login, i'd say. Since there is a blinking cursor i tried to login as user. Username is accepted, i'm asked for the password, pswd is accepted to. Doing startx does not work. I have to kill fluxbox manually before, the i reget the login manager window (whatsoever loginmanager i use).
Ctrl-Alt-F2 (and F3) work correctly.
Ctrl-Alt-F4 curiously brings back in the desktop window (i was used to have Ctrl-Alt-F7 before) (??)
Ctrl-Alt-F5 (- F7) bring to a dead window with only a blinking cursor.
(Moreover now, after installing catalyst, the resolution of the console is really ugly (640x480). Is there a way to change that, eventually configuring lilo?).
I post here the content of Xorg.0.log.old, may be someone of you knowledged gurus is able to see something:
Code: Select all
[ 1748.678]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 1748.678] X Protocol Version 11, Revision 0
[ 1748.678] Build Operating System: Slackware 14.1 Slackware Linux Project
[ 1748.678] Current Operating System: Linux darkstar 3.10.17 #2 SMP Fri Feb 14 16:45:28 CST 2014 x86_64
[ 1748.679] Kernel command line: BOOT_IMAGE=Salix ro root=801 quiet vt.default_utf8=1 rootfstype=ext4
[ 1748.679] Build Date: 09 October 2013 08:27:11PM
[ 1748.679]
[ 1748.679] Current version of pixman: 0.30.2
[ 1748.679] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1748.679] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1748.680] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Dec 2 09:33:34 2014
[ 1748.680] (==) Using config file: "/etc/X11/xorg.conf"
[ 1748.680] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1748.680] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1748.680] (==) ServerLayout "aticonfig Layout"
[ 1748.680] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 1748.680] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 1748.680] (**) | |-->Device "aticonfig-Device[0]-0"
[ 1748.680] (==) Automatically adding devices
[ 1748.680] (==) Automatically enabling devices
[ 1748.680] (==) Automatically adding GPU devices
[ 1748.680] (WW) The directory "/usr/share/fonts/local" does not exist.
[ 1748.680] Entry deleted from font path.
[ 1748.680] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[ 1748.680] Entry deleted from font path.
[ 1748.680] (WW) The directory "/usr/share/fonts/CID" does not exist.
[ 1748.680] Entry deleted from font path.
[ 1748.681] (==) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/100dpi/:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/cyrillic
[ 1748.681] (==) ModulePath set to "/usr/lib64/xorg/modules"
[ 1748.681] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1748.681] (II) Loader magic: 0x7f6d20
[ 1748.681] (II) Module ABI versions:
[ 1748.681] X.Org ANSI C Emulation: 0.4
[ 1748.681] X.Org Video Driver: 14.1
[ 1748.681] X.Org XInput driver : 19.1
[ 1748.681] X.Org Server Extension : 7.0
[ 1748.682] (--) PCI:*(0:0:1:0) 1002:990a:144d:c660 rev 0, Mem @ 0xc0000000/268435456, 0xfeb00000/262144, I/O @ 0x0000f000/256
[ 1748.682] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1748.682] Initializing built-in extension Generic Event Extension
[ 1748.682] Initializing built-in extension SHAPE
[ 1748.682] Initializing built-in extension MIT-SHM
[ 1748.683] Initializing built-in extension XInputExtension
[ 1748.683] Initializing built-in extension XTEST
[ 1748.683] Initializing built-in extension BIG-REQUESTS
[ 1748.683] Initializing built-in extension SYNC
[ 1748.683] Initializing built-in extension XKEYBOARD
[ 1748.683] Initializing built-in extension XC-MISC
[ 1748.683] Initializing built-in extension XINERAMA
[ 1748.683] Initializing built-in extension XFIXES
[ 1748.683] Initializing built-in extension RENDER
[ 1748.683] Initializing built-in extension RANDR
[ 1748.683] Initializing built-in extension COMPOSITE
[ 1748.683] Initializing built-in extension DAMAGE
[ 1748.683] Initializing built-in extension MIT-SCREEN-SAVER
[ 1748.684] Initializing built-in extension DOUBLE-BUFFER
[ 1748.684] Initializing built-in extension RECORD
[ 1748.684] Initializing built-in extension DPMS
[ 1748.684] Initializing built-in extension X-Resource
[ 1748.684] Initializing built-in extension XVideo
[ 1748.684] Initializing built-in extension XVideo-MotionCompensation
[ 1748.684] Initializing built-in extension XFree86-VidModeExtension
[ 1748.684] Initializing built-in extension XFree86-DGA
[ 1748.684] Initializing built-in extension XFree86-DRI
[ 1748.684] Initializing built-in extension DRI2
[ 1748.684] (II) "glx" will be loaded by default.
[ 1748.684] (II) LoadModule: "glx"
[ 1748.685] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 1748.685] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 1748.685] compiled for 6.9.0, module version = 1.0.0
[ 1748.685] Loading extension GLX
[ 1748.685] (II) LoadModule: "fglrx"
[ 1748.686] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 1748.735] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 1748.735] compiled for 1.4.99.906, module version = 14.30.4
[ 1748.735] Module class: X.Org Video Driver
[ 1748.735] (II) Loading sub module "fglrxdrm"
[ 1748.735] (II) LoadModule: "fglrxdrm"
[ 1748.735] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 1748.736] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1748.736] compiled for 1.4.99.906, module version = 14.30.4
[ 1748.736] (II) AMD Proprietary Linux Driver Version Identifier:14.30.4
[ 1748.736] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.301.1001
[ 1748.736] (II) AMD Proprietary Linux Driver Build Date: Sep 15 2014 18:11:36
[ 1748.736] (--) using VT number 4
[ 1748.738] (WW) Falling back to old probe method for fglrx
[ 1748.752] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 1748.755] ukiDynamicMajor: found major device number 245
[ 1748.755] ukiDynamicMajor: found major device number 245
[ 1748.755] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1748.755] ukiOpenDevice: node name is /dev/ati/card0
[ 1748.755] ukiOpenDevice: open result is 11, (OK)
[ 1748.755] ukiOpenByBusid: ukiOpenMinor returns 11
[ 1748.755] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1748.756] (--) Chipset Supported AMD Graphics Processor (0x990A) found
[ 1748.756] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 1748.757] (II) fglrx(0): pEnt->device->identifier=0x137e3f0
[ 1748.757] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 1748.757] (II) fglrx(0): FB driver is not enabled
[ 1748.757] (II) Loading sub module "vgahw"
[ 1748.757] (II) LoadModule: "vgahw"
[ 1748.758] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 1748.758] (II) Module vgahw: vendor="X.Org Foundation"
[ 1748.758] compiled for 1.14.3, module version = 0.1.0
[ 1748.758] ABI class: X.Org Video Driver, version 14.1
[ 1748.759] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 1748.759] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1748.759] (==) fglrx(0): Default visual is TrueColor
[ 1748.759] (**) fglrx(0): Option "DPMS" "true"
[ 1748.759] (==) fglrx(0): RGB weight 888
[ 1748.759] (II) fglrx(0): Using 8 bits per RGB
[ 1748.759] (==) fglrx(0): Buffer Tiling is ON
[ 1748.759] (II) Loading sub module "fglrxdrm"
[ 1748.759] (II) LoadModule: "fglrxdrm"
[ 1748.759] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 1748.759] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1748.759] compiled for 1.4.99.906, module version = 14.30.4
[ 1748.761] ukiDynamicMajor: found major device number 245
[ 1748.761] ukiDynamicMajor: found major device number 245
[ 1748.761] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1748.761] ukiOpenDevice: node name is /dev/ati/card0
[ 1748.761] ukiOpenDevice: open result is 13, (OK)
[ 1748.761] ukiOpenByBusid: ukiOpenMinor returns 13
[ 1748.761] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1748.762] (**) fglrx(0): NoAccel = NO
[ 1748.762] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 1748.762] (--) fglrx(0): Chipset: "AMD Radeon HD 7500G" (Chipset = 0x990a)
[ 1748.762] (--) fglrx(0): (PciSubVendor = 0x144d, PciSubDevice = 0xc660)
[ 1748.762] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 1748.762] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 1748.762] (--) fglrx(0): MMIO registers at 0xfeb00000
[ 1748.762] (--) fglrx(0): I/O port at 0x0000f000
[ 1748.762] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 1748.762] (II) fglrx(0): ATIF platform detected
[ 1748.784] (II) fglrx(0): AC Adapter is used
[ 1748.785] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 1748.878] (II) Loading sub module "vbe"
[ 1748.878] (II) LoadModule: "vbe"
[ 1748.878] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 1748.878] (II) Module vbe: vendor="X.Org Foundation"
[ 1748.878] compiled for 1.14.3, module version = 1.1.0
[ 1748.878] ABI class: X.Org Video Driver, version 14.1
[ 1748.879] (II) fglrx(0): VESA BIOS detected
[ 1748.879] (II) fglrx(0): VESA VBE Version 3.0
[ 1748.879] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 1748.879] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 1748.879] (II) fglrx(0): VESA VBE OEM Software Rev: 15.15
[ 1748.879] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 1748.879] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 1748.879] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 1748.879] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 1748.879] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 1748.879] (II) fglrx(0): PCIE card detected
[ 1748.879] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 1748.879] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 1748.879] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 1748.879] (II) fglrx(0): RandR 1.2 support is enabled!
[ 1748.879] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 1748.879] (II) Loading sub module "fb"
[ 1748.879] (II) LoadModule: "fb"
[ 1748.880] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 1748.880] (II) Module fb: vendor="X.Org Foundation"
[ 1748.880] compiled for 1.14.3, module version = 1.0.0
[ 1748.880] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1748.880] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 1748.880] (II) Loading sub module "ddc"
[ 1748.880] (II) LoadModule: "ddc"
[ 1748.880] (II) Module "ddc" already built-in
[ 1748.988] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 1748.988] (II) fglrx(0): Output DFP1 has no monitor section
[ 1748.988] (II) fglrx(0): Output CRT1 has no monitor section
[ 1748.988] (II) Loading sub module "ddc"
[ 1748.988] (II) LoadModule: "ddc"
[ 1748.988] (II) Module "ddc" already built-in
[ 1748.988] (II) fglrx(0): Connected Display0: LVDS
[ 1748.988] (II) fglrx(0): Display0 EDID data ---------------------------
[ 1748.988] (II) fglrx(0): Manufacturer: SEC Model: 3246 Serial#: 0
[ 1748.988] (II) fglrx(0): Year: 2011 Week: 0
[ 1748.988] (II) fglrx(0): EDID Version: 1.3
[ 1748.988] (II) fglrx(0): Digital Display Input
[ 1748.988] (II) fglrx(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 1748.988] (II) fglrx(0): Gamma: 2.20
[ 1748.988] (II) fglrx(0): No DPMS capabilities specified
[ 1748.988] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1748.988] (II) fglrx(0): First detailed timing is preferred mode
[ 1748.988] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 1748.988] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 1748.988] (II) fglrx(0): Manufacturer's mask: 0
[ 1748.988] (II) fglrx(0): Supported detailed timing:
[ 1748.988] (II) fglrx(0): clock: 70.7 MHz Image Size: 293 x 165 mm
[ 1748.988] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 1748.988] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
[ 1748.988] (II) fglrx(0): Unknown vendor-specific block f
[ 1748.988] (II) fglrx(0): SAMSUNG
[ 1748.988] (II) fglrx(0): LTN133AT23801
[ 1748.988] (II) fglrx(0): EDID (in hex):
[ 1748.988] (II) fglrx(0): 00ffffffffffff004ca3463200000000
[ 1748.988] (II) fglrx(0): 00150103801d10780a87f594574f8c27
[ 1748.988] (II) fglrx(0): 27505400000001010101010101010101
[ 1748.988] (II) fglrx(0): 0101010101019e1b5678500018303020
[ 1748.988] (II) fglrx(0): 250025a5100000190000000f00000000
[ 1748.988] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 1748.988] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 1748.988] (II) fglrx(0): 004c544e313333415432333830310059
[ 1748.988] (II) fglrx(0): End of Display0 EDID data --------------------
[ 1748.988] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 1748.989] (II) fglrx(0): EDID for output LVDS
[ 1748.989] (II) fglrx(0): Manufacturer: SEC Model: 3246 Serial#: 0
[ 1748.989] (II) fglrx(0): Year: 2011 Week: 0
[ 1748.989] (II) fglrx(0): EDID Version: 1.3
[ 1748.989] (II) fglrx(0): Digital Display Input
[ 1748.989] (II) fglrx(0): Max Image Size [cm]: horiz.: 29 vert.: 16
[ 1748.989] (II) fglrx(0): Gamma: 2.20
[ 1748.989] (II) fglrx(0): No DPMS capabilities specified
[ 1748.989] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1748.989] (II) fglrx(0): First detailed timing is preferred mode
[ 1748.989] (II) fglrx(0): redX: 0.580 redY: 0.340 greenX: 0.310 greenY: 0.550
[ 1748.989] (II) fglrx(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
[ 1748.989] (II) fglrx(0): Manufacturer's mask: 0
[ 1748.989] (II) fglrx(0): Supported detailed timing:
[ 1748.989] (II) fglrx(0): clock: 70.7 MHz Image Size: 293 x 165 mm
[ 1748.989] (II) fglrx(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1486 h_border: 0
[ 1748.989] (II) fglrx(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 792 v_border: 0
[ 1748.989] (II) fglrx(0): Unknown vendor-specific block f
[ 1748.989] (II) fglrx(0): SAMSUNG
[ 1748.989] (II) fglrx(0): LTN133AT23801
[ 1748.989] (II) fglrx(0): EDID (in hex):
[ 1748.989] (II) fglrx(0): 00ffffffffffff004ca3463200000000
[ 1748.989] (II) fglrx(0): 00150103801d10780a87f594574f8c27
[ 1748.989] (II) fglrx(0): 27505400000001010101010101010101
[ 1748.989] (II) fglrx(0): 0101010101019e1b5678500018303020
[ 1748.989] (II) fglrx(0): 250025a5100000190000000f00000000
[ 1748.989] (II) fglrx(0): 00000000001eb4027400000000fe0053
[ 1748.989] (II) fglrx(0): 414d53554e470a2020202020000000fe
[ 1748.989] (II) fglrx(0): 004c544e313333415432333830310059
[ 1748.989] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1748.989] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1748.989] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1748.990] (II) fglrx(0): Printing probed modes for output LVDS
[ 1748.990] (II) fglrx(0): Modeline "1366x768"x60.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1748.990] (II) fglrx(0): Modeline "1360x768"x60.0 70.70 1360 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "1280x768"x60.0 70.70 1280 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "1280x720"x60.0 70.70 1280 1414 1446 1486 720 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "1024x768"x60.0 70.70 1024 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "1024x600"x60.0 70.70 1024 1414 1446 1486 600 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "800x600"x60.0 70.70 800 1414 1446 1486 600 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "800x480"x60.0 70.70 800 1414 1446 1486 480 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): Modeline "640x480"x60.0 70.70 640 1414 1446 1486 480 770 775 792 -hsync -vsync (47.6 kHz e)
[ 1748.990] (II) fglrx(0): EDID for output DFP1
[ 1748.990] (II) fglrx(0): EDID for output CRT1
[ 1748.990] (II) fglrx(0): Output LVDS connected
[ 1748.990] (II) fglrx(0): Output DFP1 disconnected
[ 1748.990] (II) fglrx(0): Output CRT1 disconnected
[ 1748.990] (II) fglrx(0): Using exact sizes for initial modes
[ 1748.990] (II) fglrx(0): Output LVDS using initial mode 1366x768
[ 1748.990] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1748.990] (II) fglrx(0): Display dimensions: (290, 160) mm
[ 1748.990] (II) fglrx(0): DPI set to (119, 121)
[ 1748.990] (II) fglrx(0): Eyefinity capable adapter detected.
[ 1748.990] (II) fglrx(0): Adapter AMD Radeon HD 7500G has 4 configurable heads and 1 displays connected.
[ 1748.990] (==) fglrx(0): PseudoColor visuals disabled
[ 1748.990] (II) Loading sub module "ramdac"
[ 1748.990] (II) LoadModule: "ramdac"
[ 1748.990] (II) Module "ramdac" already built-in
[ 1748.990] (==) fglrx(0): NoDRI = NO
[ 1748.990] (==) fglrx(0): Capabilities: 0x00000000
[ 1748.990] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 1748.990] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 1748.990] (==) fglrx(0): UseFastTLS=0
[ 1748.990] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 1748.990] (--) Depth 24 pixmap format is 32 bpp
[ 1748.991] Loading extension ATIFGLRXDRI
[ 1748.991] (II) fglrx(0): doing swlDriScreenInit
[ 1748.991] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 1748.991] ukiDynamicMajor: found major device number 245
[ 1748.991] ukiDynamicMajor: found major device number 245
[ 1748.991] ukiDynamicMajor: found major device number 245
[ 1748.991] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1748.991] ukiOpenDevice: node name is /dev/ati/card0
[ 1748.991] ukiOpenDevice: open result is 14, (OK)
[ 1748.991] ukiOpenByBusid: ukiOpenMinor returns 14
[ 1748.991] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1748.991] (II) fglrx(0): [uki] DRM interface version 1.0
[ 1748.991] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 1748.991] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x59c1000
[ 1748.991] (II) fglrx(0): [uki] mapped SAREA 0x59c1000 to 0x7f46061e1000
[ 1748.991] (II) fglrx(0): [uki] framebuffer handle = 0x59c2000
[ 1748.991] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 1748.991] (II) fglrx(0): swlDriScreenInit done
[ 1748.991] (II) fglrx(0): Kernel Module Version Information:
[ 1748.991] (II) fglrx(0): Name: fglrx
[ 1748.991] (II) fglrx(0): Version: 14.30.4
[ 1748.991] (II) fglrx(0): Date: Sep 15 2014
[ 1748.991] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 1748.991] (II) fglrx(0): Kernel Module version matches driver.
[ 1748.991] (II) fglrx(0): Kernel Module Build Time Information:
[ 1748.991] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.10.17
[ 1748.991] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 1748.991] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 1748.991] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 1748.991] (II) fglrx(0): [uki] register handle = 0x059c3000
[ 1748.992] (II) fglrx(0): DRI initialization successfull
[ 1748.992] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01080000
[ 1748.993] (==) fglrx(0): Backing store disabled
[ 1748.993] Loading extension FGLRXEXTENSION
[ 1748.993] (**) fglrx(0): DPMS enabled
[ 1748.993] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 1748.993] (**) fglrx(0): Textured Video is enabled.
[ 1748.993] (II) LoadModule: "glesx"
[ 1748.993] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 1748.994] (II) Module glesx: vendor="X.Org Foundation"
[ 1748.994] compiled for 1.4.99.906, module version = 1.0.0
[ 1748.994] Loading extension GLESX
[ 1748.994] (II) fglrx(0): GLESX enableFlags = 8784
[ 1748.994] (II) fglrx(0): GLESX is enabled
[ 1748.994] (II) LoadModule: "amdxmm"
[ 1748.994] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 1748.995] (II) Module amdxmm: vendor="X.Org Foundation"
[ 1748.995] compiled for 1.4.99.906, module version = 2.0.0
[ 1749.019] Loading extension AMDXVOPL
[ 1749.019] Loading extension AMDXVBA
[ 1749.020] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 1749.023] (II) fglrx(0): Enable composite support successfully
[ 1749.023] (WW) fglrx(0): Option "VendorName" is not used
[ 1749.023] (WW) fglrx(0): Option "ModelName" is not used
[ 1749.023] (II) fglrx(0): X context handle = 0x4
[ 1749.023] (II) fglrx(0): [DRI] installation complete
[ 1749.023] (==) fglrx(0): Silken mouse enabled
[ 1749.023] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 1749.024] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1749.024] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 1749.024] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 1750.054] (--) RandR disabled
[ 1750.062] ukiDynamicMajor: found major device number 245
[ 1750.062] ukiDynamicMajor: found major device number 245
[ 1750.062] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1750.062] ukiOpenDevice: node name is /dev/ati/card0
[ 1750.062] ukiOpenDevice: open result is 15, (OK)
[ 1750.062] ukiOpenByBusid: ukiOpenMinor returns 15
[ 1750.062] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1750.067] ukiDynamicMajor: found major device number 245
[ 1750.067] ukiDynamicMajor: found major device number 245
[ 1750.067] ukiDynamicMajor: found major device number 245
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card0
[ 1750.067] ukiOpenDevice: open result is 16, (OK)
[ 1750.067] ukiGetBusid returned 'PCI:0:1:0'
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card1
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: Open failed
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card2
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: Open failed
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card3
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: Open failed
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card4
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: Open failed
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card5
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: Open failed
[ 1750.067] ukiOpenDevice: node name is /dev/ati/card6
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.067] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card7
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card8
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card9
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card10
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card11
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card12
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card13
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card14
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card15
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: open result is -1, (No such device)
[ 1750.068] ukiOpenDevice: Open failed
[ 1750.068] ukiDynamicMajor: found major device number 245
[ 1750.068] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1750.068] ukiOpenDevice: node name is /dev/ati/card0
[ 1750.068] ukiOpenDevice: open result is 16, (OK)
[ 1750.068] ukiOpenByBusid: ukiOpenMinor returns 16
[ 1750.068] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1750.126] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 1750.127] ukiDynamicMajor: found major device number 245
[ 1750.127] ukiDynamicMajor: found major device number 245
[ 1750.127] ukiDynamicMajor: found major device number 245
[ 1750.127] ukiOpenDevice: node name is /dev/ati/card0
[ 1750.127] ukiOpenDevice: open result is 17, (OK)
[ 1750.128] ukiGetBusid returned 'PCI:0:1:0'
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card1
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card2
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card3
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card4
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card5
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card6
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card7
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card8
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card9
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card10
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card11
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card12
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: Open failed
[ 1750.128] ukiOpenDevice: node name is /dev/ati/card13
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.128] ukiOpenDevice: open result is -1, (No such device)
[ 1750.129] ukiOpenDevice: Open failed
[ 1750.129] ukiOpenDevice: node name is /dev/ati/card14
[ 1750.129] ukiOpenDevice: open result is -1, (No such device)
[ 1750.129] ukiOpenDevice: open result is -1, (No such device)
[ 1750.129] ukiOpenDevice: Open failed
[ 1750.129] ukiOpenDevice: node name is /dev/ati/card15
[ 1750.129] ukiOpenDevice: open result is -1, (No such device)
[ 1750.129] ukiOpenDevice: open result is -1, (No such device)
[ 1750.129] ukiOpenDevice: Open failed
[ 1750.129] ukiDynamicMajor: found major device number 245
[ 1750.129] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1750.129] ukiOpenDevice: node name is /dev/ati/card0
[ 1750.129] ukiOpenDevice: open result is 17, (OK)
[ 1750.129] ukiOpenByBusid: ukiOpenMinor returns 17
[ 1750.129] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1750.148] (II) fglrx(0): Setting screen physical size to 361 x 203
[ 1750.249] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1750.249] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1750.249] (**) Power Button: Applying InputClass "keyboard-all"
[ 1750.249] (**) Power Button: Applying InputClass "Keyboard settings"
[ 1750.249] (II) LoadModule: "evdev"
[ 1750.250] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 1750.250] (II) Module evdev: vendor="X.Org Foundation"
[ 1750.250] compiled for 1.14.3, module version = 2.8.2
[ 1750.250] Module class: X.Org XInput Driver
[ 1750.250] ABI class: X.Org XInput driver, version 19.1
[ 1750.250] (II) Using input driver 'evdev' for 'Power Button'
[ 1750.250] (**) Power Button: always reports core events
[ 1750.250] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1750.250] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1750.250] (--) evdev: Power Button: Found keys
[ 1750.250] (II) evdev: Power Button: Configuring as keyboard
[ 1750.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 1750.250] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1750.250] (**) Option "xkb_rules" "evdev"
[ 1750.250] (**) Option "xkb_model" "pc104"
[ 1750.250] (**) Option "xkb_layout" "de"
[ 1750.250] (WW) Option "xkb_variant" requires a string value
[ 1750.250] (WW) Option "xkb_options" requires a string value
[ 1750.285] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 1750.285] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1750.285] (**) Video Bus: Applying InputClass "keyboard-all"
[ 1750.285] (**) Video Bus: Applying InputClass "Keyboard settings"
[ 1750.285] (II) Using input driver 'evdev' for 'Video Bus'
[ 1750.285] (**) Video Bus: always reports core events
[ 1750.285] (**) evdev: Video Bus: Device: "/dev/input/event5"
[ 1750.285] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1750.285] (--) evdev: Video Bus: Found keys
[ 1750.285] (II) evdev: Video Bus: Configuring as keyboard
[ 1750.285] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input5/event5"
[ 1750.285] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1750.285] (**) Option "xkb_rules" "evdev"
[ 1750.285] (**) Option "xkb_model" "pc104"
[ 1750.285] (**) Option "xkb_layout" "de"
[ 1750.285] (WW) Option "xkb_variant" requires a string value
[ 1750.285] (WW) Option "xkb_options" requires a string value
[ 1750.285] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1750.285] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1750.285] (**) Power Button: Applying InputClass "keyboard-all"
[ 1750.285] (**) Power Button: Applying InputClass "Keyboard settings"
[ 1750.285] (II) Using input driver 'evdev' for 'Power Button'
[ 1750.285] (**) Power Button: always reports core events
[ 1750.286] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 1750.286] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1750.286] (--) evdev: Power Button: Found keys
[ 1750.286] (II) evdev: Power Button: Configuring as keyboard
[ 1750.286] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 1750.286] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 1750.286] (**) Option "xkb_rules" "evdev"
[ 1750.286] (**) Option "xkb_model" "pc104"
[ 1750.286] (**) Option "xkb_layout" "de"
[ 1750.286] (WW) Option "xkb_variant" requires a string value
[ 1750.286] (WW) Option "xkb_options" requires a string value
[ 1750.286] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 1750.286] (II) No input driver specified, ignoring this device.
[ 1750.286] (II) This device may have been added with another device file.
[ 1750.286] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event6)
[ 1750.286] (II) No input driver specified, ignoring this device.
[ 1750.286] (II) This device may have been added with another device file.
[ 1750.287] (II) config/udev: Adding input device 2.4G wireless Mouse (/dev/input/event10)
[ 1750.287] (**) 2.4G wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 1750.287] (II) Using input driver 'evdev' for '2.4G wireless Mouse'
[ 1750.287] (**) 2.4G wireless Mouse: always reports core events
[ 1750.287] (**) evdev: 2.4G wireless Mouse: Device: "/dev/input/event10"
[ 1750.287] (--) evdev: 2.4G wireless Mouse: Vendor 0x40b Product 0x2011
[ 1750.287] (--) evdev: 2.4G wireless Mouse: Found 12 mouse buttons
[ 1750.287] (--) evdev: 2.4G wireless Mouse: Found scroll wheel(s)
[ 1750.287] (--) evdev: 2.4G wireless Mouse: Found relative axes
[ 1750.287] (--) evdev: 2.4G wireless Mouse: Found x and y relative axes
[ 1750.287] (--) evdev: 2.4G wireless Mouse: Found absolute axes
[ 1750.287] (II) evdev: 2.4G wireless Mouse: Forcing absolute x/y axes to exist.
[ 1750.287] (II) evdev: 2.4G wireless Mouse: Configuring as mouse
[ 1750.287] (II) evdev: 2.4G wireless Mouse: Adding scrollwheel support
[ 1750.287] (**) evdev: 2.4G wireless Mouse: YAxisMapping: buttons 4 and 5
[ 1750.287] (**) evdev: 2.4G wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1750.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb5/5-1/5-1:1.0/input/input10/event10"
[ 1750.287] (II) XINPUT: Adding extended input device "2.4G wireless Mouse" (type: MOUSE, id 9)
[ 1750.287] (II) evdev: 2.4G wireless Mouse: initialized for relative axes.
[ 1750.287] (WW) evdev: 2.4G wireless Mouse: ignoring absolute axes.
[ 1750.287] (**) 2.4G wireless Mouse: (accel) keeping acceleration scheme 1
[ 1750.287] (**) 2.4G wireless Mouse: (accel) acceleration profile 0
[ 1750.287] (**) 2.4G wireless Mouse: (accel) acceleration factor: 2.000
[ 1750.287] (**) 2.4G wireless Mouse: (accel) acceleration threshold: 4
[ 1750.288] (II) config/udev: Adding input device 2.4G wireless Mouse (/dev/input/mouse1)
[ 1750.288] (II) No input driver specified, ignoring this device.
[ 1750.288] (II) This device may have been added with another device file.
[ 1750.288] (II) config/udev: Adding input device WebCam SC-13HDL12131N (/dev/input/event11)
[ 1750.288] (**) WebCam SC-13HDL12131N: Applying InputClass "evdev keyboard catchall"
[ 1750.288] (**) WebCam SC-13HDL12131N: Applying InputClass "keyboard-all"
[ 1750.288] (**) WebCam SC-13HDL12131N: Applying InputClass "Keyboard settings"
[ 1750.288] (II) Using input driver 'evdev' for 'WebCam SC-13HDL12131N'
[ 1750.288] (**) WebCam SC-13HDL12131N: always reports core events
[ 1750.288] (**) evdev: WebCam SC-13HDL12131N: Device: "/dev/input/event11"
[ 1750.288] (--) evdev: WebCam SC-13HDL12131N: Vendor 0x2232 Product 0x1035
[ 1750.288] (--) evdev: WebCam SC-13HDL12131N: Found keys
[ 1750.288] (II) evdev: WebCam SC-13HDL12131N: Configuring as keyboard
[ 1750.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input11/event11"
[ 1750.288] (II) XINPUT: Adding extended input device "WebCam SC-13HDL12131N" (type: KEYBOARD, id 10)
[ 1750.288] (**) Option "xkb_rules" "evdev"
[ 1750.288] (**) Option "xkb_model" "pc104"
[ 1750.288] (**) Option "xkb_layout" "de"
[ 1750.288] (WW) Option "xkb_variant" requires a string value
[ 1750.288] (WW) Option "xkb_options" requires a string value
[ 1750.289] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event8)
[ 1750.289] (II) No input driver specified, ignoring this device.
[ 1750.289] (II) This device may have been added with another device file.
[ 1750.289] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event9)
[ 1750.289] (II) No input driver specified, ignoring this device.
[ 1750.289] (II) This device may have been added with another device file.
[ 1750.289] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
[ 1750.289] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1750.289] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard-all"
[ 1750.289] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard settings"
[ 1750.289] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1750.289] (**) AT Translated Set 2 keyboard: always reports core events
[ 1750.289] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event1"
[ 1750.289] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1750.289] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1750.289] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1750.289] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input1/event1"
[ 1750.289] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 1750.289] (**) Option "xkb_rules" "evdev"
[ 1750.290] (**) Option "xkb_model" "pc104"
[ 1750.290] (**) Option "xkb_layout" "de"
[ 1750.290] (WW) Option "xkb_variant" requires a string value
[ 1750.290] (WW) Option "xkb_options" requires a string value
[ 1750.290] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[ 1750.290] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 1750.290] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad"
[ 1750.290] (II) LoadModule: "synaptics"
[ 1750.291] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 1750.291] (II) Module synaptics: vendor="X.Org Foundation"
[ 1750.291] compiled for 1.14.2, module version = 1.7.1
[ 1750.291] Module class: X.Org XInput Driver
[ 1750.291] ABI class: X.Org XInput driver, version 19.1
[ 1750.291] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[ 1750.291] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 1750.291] (**) Option "Device" "/dev/input/event7"
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 2940 (res 0)
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 1400 (res 0)
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left right double triple
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 1750.315] (**) Option "TapButton1" "1"
[ 1750.315] (**) Option "TapButton2" "2"
[ 1750.315] (**) Option "TapButton3" "3"
[ 1750.315] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1750.315] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 1750.325] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event7"
[ 1750.325] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 12)
[ 1750.325] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 1750.325] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[ 1750.325] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.061
[ 1750.325] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 1750.325] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[ 1750.325] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 1750.325] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 1750.326] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1750.326] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 1750.326] (II) No input driver specified, ignoring this device.
[ 1750.326] (II) This device may have been added with another device file.
[ 1750.327] (II) config/udev: Adding input device Speakup (/dev/input/event0)
[ 1750.327] (**) Speakup: Applying InputClass "evdev keyboard catchall"
[ 1750.327] (**) Speakup: Applying InputClass "keyboard-all"
[ 1750.327] (**) Speakup: Applying InputClass "Keyboard settings"
[ 1750.327] (II) Using input driver 'evdev' for 'Speakup'
[ 1750.327] (**) Speakup: always reports core events
[ 1750.327] (**) evdev: Speakup: Device: "/dev/input/event0"
[ 1750.327] (--) evdev: Speakup: Vendor 0 Product 0
[ 1750.327] (--) evdev: Speakup: Found keys
[ 1750.327] (II) evdev: Speakup: Configuring as keyboard
[ 1750.327] (**) Option "config_info" "udev:/sys/devices/virtual/input/input0/event0"
[ 1750.327] (II) XINPUT: Adding extended input device "Speakup" (type: KEYBOARD, id 13)
[ 1750.327] (**) Option "xkb_rules" "evdev"
[ 1750.327] (**) Option "xkb_model" "pc104"
[ 1750.327] (**) Option "xkb_layout" "de"
[ 1750.327] (WW) Option "xkb_variant" requires a string value
[ 1750.327] (WW) Option "xkb_options" requires a string value
[ 1750.342] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 1759.474] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1759.475] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1759.475] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1759.597] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1759.597] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1759.597] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1779.475] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1779.476] (II) fglrx(0): Backup framebuffer data.
[ 1779.493] (II) fglrx(0): Backup complete.
[ 1779.513] (II) fglrx(0): Init Suspend Console
[ 1800.547] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1801.610] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1801.611] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1801.611] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1801.663] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1804.559] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1804.561] (II) fglrx(0): Backup framebuffer data.
[ 1804.577] (II) fglrx(0): Backup complete.
[ 1804.604] (II) fglrx(0): Init Suspend Console
[ 1811.831] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1812.894] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1812.894] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1812.894] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1812.946] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1817.352] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1817.354] (II) fglrx(0): Backup framebuffer data.
[ 1817.364] (II) fglrx(0): Backup complete.
[ 1817.386] (II) fglrx(0): Init Suspend Console
[ 1832.073] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1833.184] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1833.184] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1833.184] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1833.236] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1835.515] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1835.517] (II) fglrx(0): Backup framebuffer data.
[ 1835.527] (II) fglrx(0): Backup complete.
[ 1835.545] (II) fglrx(0): Init Suspend Console
[ 1842.859] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1843.936] (II) fglrx(0): EDID vendor "SEC", prod id 12870
[ 1843.936] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1843.936] (II) fglrx(0): Modeline "1366x768"x0.0 70.70 1366 1414 1446 1486 768 770 775 792 -hsync -vsync (47.6 kHz eP)
[ 1843.988] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[ 1876.891] (II) evdev: Speakup: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.892] (II) UnloadModule: "synaptics"
[ 1876.892] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.892] (II) evdev: WebCam SC-13HDL12131N: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.892] (II) evdev: 2.4G wireless Mouse: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.892] (II) evdev: Power Button: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.892] (II) evdev: Video Bus: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.892] (II) evdev: Power Button: Close
[ 1876.892] (II) UnloadModule: "evdev"
[ 1876.895] (II) fglrx(0): Shutdown CMMQS
[ 1876.896] (II) fglrx(0): [uki] removed 1 reserved context for kernel
[ 1876.896] (II) fglrx(0): [uki] unmapping 8192 bytes of SAREA 0x59c1000 at 0x7f46061e1000
[ 1876.911] (II) fglrx(0): Init Suspend Console
[ 1878.030] (EE) Server terminated successfully (0). Closing log file.
Re: wm-logout or :Quit end into nirwana
Try adding "nomodeset" in the append line of lilo.conf (and run lilo). Reboot after that.
Re: wm-logout or :Quit end into nirwana
I am not using the new version of Salix-fluxbox since its "mc' file manager
is somehow defective. However, from that now abandoned install I took
wm-logout into my working box wich is Salix-14.1-Xfce4 with Fluxbox installed.
Somehow I noticed that my box does not behave properly after that and using
it especially when using Suspend. Discarded wm-config and all normal again.
"Vogel friss oder stirb" my philosophy. (It's sink or swim)
is somehow defective. However, from that now abandoned install I took
wm-logout into my working box wich is Salix-14.1-Xfce4 with Fluxbox installed.
Somehow I noticed that my box does not behave properly after that and using
it especially when using Suspend. Discarded wm-config and all normal again.
"Vogel friss oder stirb" my philosophy. (It's sink or swim)
Last edited by Atip on 3. Dec 2014, 01:24, edited 1 time in total.
Re: wm-logout or :Quit end into nirwana
Nothing changed. Neither in the display nor regard the logout problems.gapan wrote:Try adding "nomodeset" in the append line of lilo.conf (and run lilo). Reboot after that.
Re: wm-logout or :Quit end into nirwana
For sure, my problems are related in some way - to me not understandable, i'm not enough skilledAtip wrote:I am not using the new version of Salix-fluxbox since its "mc' file manager
is somehow defective. However, from that now abandoned install I took
wm-logout into my working box wich is Salix-14.1-Xfce4 with Fluxbox installed.
Somehow I noticed that my box does not behave properly after that and using
it especially when using Suspend. Discarded wm-config and all normal again.
"Vogel friss oder stirb" my pilisophy. (It's sink or swim)
- with the installation of the fglrx (amd catalyst) video driver. I need that desparately OTOH, because otherwise my laptop is constantely overheating und shutting itself down because of overheating.Before, with the default radeon driver all worked well. Ok, using slim as display manager made wm-logout partially unusable but even with slim i could close a fluxbox session - *CORRECTELY* - using Ctrl-Alt-Del.
May be it would be an idea to look for, where Ctrl-Alt-Del ends now, and how it could be re-established to its default behaviour (from there on i could try to do a little script based on xdotools ... ). Would be a valid starting point.