[SOLVED] Salix and Grub2

fran · Post by **fran** » 21. Jun 2012, 17:42

Hi. In my main drive I have Linux Mint 10, which controls the grub2 using <Grub customizer>. I installed Salix on a partition of external USB disk, along with other OS. I followed directions on the web and I was comforted by your Forum (Installation: Loading Salix OS using Ubuntu's GRUB2?). So I got rid of lilo at the end of the installation. In fact after reboot I see Salix on the list of OSs bootable. But unfortunately, at the boot as a result I got a <VFS: Cannot open root device "sdb17" or unknow-block (0,0); please append a correct "root=" boot option;here are the avaible partitions: (...) sda driver : sd (...) sda1 (...) sda 2 (...) sda 5 (..)> and then <(...) kernel panic - not syncing: VFS : Unable to mount root fs on unknow-block (0,0) (...)>
Any suggestion?

Shador · Post by **Shador** » 21. Jun 2012, 20:13

Yes, give me your partition layout and send me a 2-day all inclusive holiday trip somewhere far, far away.

Ok that second part was just joking, but I'm serious about the first.
Hey, wait, I think you're eating banana ice cream right now. No? Wrong guess? Ok, maybe clairvoyant isn't the right job for me.

At least you attached the full error message.

So my guess that you hit a bug in os-prober I read about. But let's see.

fran · Post by **fran** » 21. Jun 2012, 20:30

We can discuss over the 2-day all inclusive holiday trip, of course.
Here you are:
df -h
File system Dim. Usati Dispon. Uso% Montato su
rootfs 16G 6,2G 9,6G 40% /
devtmpfs 494M 0 494M 0% /dev
tmpfs 502M 236K 502M 1% /dev/shm
tmpfs 502M 1,5M 500M 1% /run
/dev/sdb15 16G 6,2G 9,6G 40% /
tmpfs 502M 0 502M 0% /sys/fs/cgroup
tmpfs 502M 0 502M 0% /media
/dev/sdb9 20G 5,4G 14G 29% /run/media/fran/Chakra
/dev/sdc1 7,3G 6,0G 1,4G 82% /run/media/fran/MULTISYSTEM
/dev/sdb7 49G 15G 35G 30% /run/media/fran/USB_DOCS
/dev/sdb8 69G 65G 3,8G 95% /run/media/fran/USB_APPS
/dev/sdb5 88G 46G 43G 52% /run/media/fran/USB_IMMAGIN
/dev/sdb18 20G 12G 7,1G 63% /run/media/fran/Kubuntu1204
/dev/sdb6 67G 22G 46G 33% /run/media/fran/USB_MUSICA
/dev/sdb19 14G 340M 13G 3% /run/media/fran/Arch
/dev/sdb3 14G 7,8G 4,7G 63% /run/media/fran/Hybryde
/dev/sdb1 14G 11G 2,5G 81% /run/media/fran/LMDE
/dev/sdb17 22G 3,6G 17G 18% /run/media/fran/0bcb7084-1d52-4020-9c8b-2cc4abc3c47d
/dev/sdb11 14G 5,4G 8,0G 41% /run/media/fran/Asturix
/dev/sdb14 20G 5,0G 15G 26% /run/media/fran/Fuduntu-i386
/dev/sdb13 21G 8,0G 12G 42% /run/media/fran/OpenSuse
/dev/sdb16 20G 5,3G 14G 29% /run/media/fran/MintGnome3

Shador · Post by **Shador** » 21. Jun 2012, 21:04

Do you have the output of fdisk -l and blkid too? It seems like maybe the device order is not stable but to be sure I would need the whole partition listing that goes with the kernel panic.

fran · Post by **fran** » 22. Jun 2012, 06:47

fdisk -l

Disk /dev/sda: 20.0 GB, 20003880960 bytes
255 testine, 63 settori/tracce, 2432 cilindri, totale 39070080 settori
Unità = settori di 1 * 512 = 512 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x0003c278

Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 2048 37347327 18672640 83 Linux
/dev/sda2 37349374 39069695 860161 5 Esteso
/dev/sda5 37349376 39069695 860160 82 Linux swap / Solaris

Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 testine, 63 settori/tracce, 60801 cilindri, totale 976773168 settori
Unità = settori di 1 * 512 = 512 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x000df893

Dispositivo Boot Start End Blocks Id System
/dev/sdb1 63 27535359 13767648+ 83 Linux
/dev/sdb2 55070820 57544829 1237005 82 Linux swap / Solaris
/dev/sdb3 27535360 55070719 13767680 83 Linux
/dev/sdb4 59588606 976773119 458592257 5 Esteso
/dev/sdb5 162304758 346618439 92156841 b W95 FAT32
/dev/sdb6 346618503 486621183 70001340+ b W95 FAT32
/dev/sdb7 530932248 633333759 51200756 b W95 FAT32
/dev/sdb8 674296308 817660304 71681998+ b W95 FAT32
/dev/sdb9 817661952 858677576 20507812+ 83 Linux
/dev/sdb10 973797376 976773119 1487872 82 Linux swap / Solaris
/dev/sdb11 103702528 133001215 14649344 83 Linux
/dev/sdb12 101787903 103699574 955836 82 Linux swap / Solaris
/dev/sdb13 59588608 101785599 21098496 83 Linux
/dev/sdb14 899575803 940533759 20478978+ 83 Linux
/dev/sdb15 * 940541553 973796039 16627243+ 83 Linux
/dev/sdb16 858681344 899573759 20446208 83 Linux
/dev/sdb17 486623232 530931711 22154240 83 Linux
/dev/sdb18 633335808 674295807 20480000 83 Linux
/dev/sdb19 133003264 162303999 14650368 83 Linux

blkid
/dev/sda1: UUID="becc3759-5b33-494f-b1ad-42cfda035866" TYPE="ext4"
/dev/sda5: UUID="2e040a71-c3f1-49d4-bb4b-894573584396" TYPE="swap"
/dev/sdb1: LABEL="LMDE" UUID="3cd8bf6d-d5be-40db-983a-17fdb08a6416" TYPE="ext4"
/dev/sdb2: UUID="bb0ee1fa-a35d-4c7d-b96b-b94e6ca21796" TYPE="swap"
/dev/sdb3: LABEL="Hybryde" UUID="2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422" TYPE="ext4"
/dev/sdb5: LABEL="USB_IMMAGIN" UUID="8408-8B1E" TYPE="vfat"
/dev/sdb6: LABEL="USB_MUSICAM-t" UUID="8966-E81D" TYPE="vfat"
/dev/sdb7: LABEL="USB_DOCS" UUID="8F85-8939" TYPE="vfat"
/dev/sdb8: LABEL="USB_APPS" UUID="939B-D8D8" TYPE="vfat"
/dev/sdb9: LABEL="Chakra" UUID="add6f2db-81a4-4de4-8a06-8d23989f7c37" TYPE="ext4"
/dev/sdb10: UUID="5f1f9e3d-9db2-42ef-afaf-9780015aacd1" TYPE="swap"
/dev/sdb11: LABEL="Asturix" UUID="c142d2e6-9b70-48bd-8822-407cae1b128c" TYPE="ext4"
/dev/sdb12: UUID="53db5ba5-64d6-4bbe-a206-2efffa71021d" TYPE="swap"
/dev/sdb13: LABEL="OpenSuse" UUID="6f9ea862-bad9-4181-b182-11646190772e" TYPE="ext4"
/dev/sdb14: LABEL="Fuduntu-i386" UUID="a0810cc8-4fbd-4a5d-9178-df2785980447" TYPE="ext4"
/dev/sdb15: LABEL="_Fedora-17-i686-" UUID="5f397138-f29a-49b5-9c3e-72c538ce9146" TYPE="ext4"
/dev/sdb16: LABEL="MintGnome3" UUID="1a4af39e-2c90-4509-a41f-5a4424f9cb6f" TYPE="ext4"
/dev/sdb17: UUID="0bcb7084-1d52-4020-9c8b-2cc4abc3c47d" TYPE="ext4"
/dev/sdb18: LABEL="Kubuntu1204" UUID="33754e7b-5217-42e3-96e4-bfa1c6deaf40" TYPE="ext4"
/dev/sdb19: LABEL="Arch" UUID="995f3f00-971f-4a7b-97e9-7cf8f7280db7" TYPE="ext4"
/dev/sdc1: LABEL="MULTISYSTEM" UUID="0D3D-5DA6" TYPE="vfat"

Adys · Post by **Adys** » 22. Jun 2012, 07:40

Shador wrote:It seems like maybe the device order is not stable

I don't know if this is part of the problem, but...

According to the "Start/End blocks", the order of some (primary and logical) partitions is "shifted" (not that it is a problem by itself, but maybe it is part of the cause for the difficulties to boot).

Code: Select all

sdb
1 - 3 - 2 - 4

13 - 12 - 11 - 19 - 5 - 6 - 17 - 7 - 18 - 8 - 9 - 16 - 14 - 15

with sdb4 as extended partition and sdb15 marked as bootable/active partition.

fran · Post by **fran** » 22. Jun 2012, 07:49

Thank you. I am aware that the partitioning over time is a little messed up. Nevertheless with the other OS I have no boot problems. The failure to start is own of Salix. I was wondering if (entering the system via chroot) I can install Grub2 in Salix.

Adys · Post by **Adys** » 22. Jun 2012, 08:31

You could try posting the info from the boot_info_script ( http://sourceforge.net/projects/bootinf ... nfoscript/ ). So maybe knowing what is currently in your Salix partition could help (post the results.txt from BIS, or at least the relvant info of the specific Salix partition). Now I'll leave the rest to Shador

.

fran · Post by **fran** » 22. Jun 2012, 11:13

Boot Info Script 0.61 [1 April 2012]

Code: Select all

============================= Boot Info Summary: ===============================

 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector 
    1 of the same hard drive for core.img. core.img is at this location and 
    looks in partition 1 for (,msdos1)/boot/grub.
 => Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector 
    1 of the same hard drive for core.img. core.img is at this location and 
    looks in partition 1 for (,msdos1)/boot/grub.
 => Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of 
    the same hard drive for core.img. core.img is at this location and looks 
    for (,msdos1)/boot/grub on this drive.

sda1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 10 Julia
    Boot files:        /grub/menu.lst /boot/grub/menu.lst /boot/grub/grub.cfg 
                       /etc/fstab /boot/grub/core.img

sda2: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  Unknown
    Boot sector info: 

sda5: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb1: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint Debian Edition
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf /boot/grub/core.img

sdb2: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb3: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf /boot/grub/core.img

sdb4: __________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sdb5: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7: FAT32
    Boot sector info:  According to the info in the boot sector, sdb5 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb5 starts at sector 162304758.
    Operating System:  
    Boot files:        

sdb6: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb7: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7: FAT32
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  
    Boot files:        

sdb8: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  Windows 7: FAT32
    Boot sector info:  According to the info in the boot sector, sdb8 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb8 starts at sector 674296308.
    Operating System:  
    Boot files:        

sdb9: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Chakra Linux (2012.02.08 - 
                       Archimedes) () ()
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/syslinux/syslinux.cfg /boot/grub/core.img

sdb10: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb11: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 11.10
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf /boot/grub/core.img

sdb12: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sdb13: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  Grub Legacy
    Boot sector info:  Grub Legacy (v0.97) is installed in the boot sector 
                       of sdb13 and looks at sector 93681568 of the same hard 
                       drive for the stage2 file.  A stage2 file is at this 
                       location on /dev/sdb.  Stage2 looks on partition #13 
                       for /boot/grub/menu.lst.
    Operating System:  Welcome to openSUSE 12.1 
                       "Asparagus" - Kernel ().
    Boot files:        /boot/grub/menu.lst /etc/fstab

sdb14: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Fuduntu (Punny Name Serious 
                       Distro)
    Boot files:        /etc/fstab

sdb15: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Fedora release 17 (Beefy 
                       Miracle) Kernel on an ()
    Boot files:        /boot/grub2/grub.cfg /etc/fstab

sdb16: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Linux Mint 12 Lisa
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

[b]sdb17: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Slackware 13.37.0
    Boot files:        /etc/fstab[/b]

sdb18: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab 
                       /boot/extlinux/extlinux.conf /boot/grub/core.img

sdb19: _________________________________________________________________________

   (...) 

sdc1: __________________________________________________________________________

    (...)
============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

(...)


Drive: sdb _____________________________________________________________________

(...)


Drive: sdc _____________________________________________________________________

(...)

(...)


"blkid" output: ________________________________________________________________

(...)

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/sdb18       /                        ext4       (rw,errors=remount-ro)
/dev/sdb7        /media/USB_DOCS          vfat       (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,uhelper=udisks)


============================= sda1/grub/menu.lst: ==============================

--------------------------------------------------------------------------------
timeout 5
default saved

title paldo stable (linux 3.4.2-paldo1-x86)
kernel /boot/linux-3.4.2-paldo1-x86 root=/dev/disk/by-uuid/86c21aa1-9232-4c3c-a6a7-4ddd6dc9484e resume=/dev/disk/by-uuid/bb0ee1fa-a35d-4c7d-b96b-b94e6ca21796
initrd /boot/initramfs-3.4.2-paldo1-x86

--------------------------------------------------------------------------------

=========================== sda1/boot/grub/menu.lst: ===========================

--------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default		0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout		3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title		Windows 95/98/NT/2000
# root		(hd0,0)
# makeactive
# chainloader	+1
#
# title		Linux
# root		(hd0,1)
# kernel	/vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=becc3759-5b33-494f-b1ad-42cfda035866

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title		Linux Mint 10 Julia, kernel 2.6.35-30-generic
uuid		becc3759-5b33-494f-b1ad-42cfda035866
kernel		/boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro quiet splash 
initrd		/boot/initrd.img-2.6.35-30-generic

title		Linux Mint 10 Julia, kernel 2.6.35-30-generic (recovery mode)
uuid		becc3759-5b33-494f-b1ad-42cfda035866
kernel		/boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro  single
initrd		/boot/initrd.img-2.6.35-30-generic

title		Linux Mint 10 Julia, kernel 2.6.35-22-generic
uuid		becc3759-5b33-494f-b1ad-42cfda035866
kernel		/boot/vmlinuz-2.6.35-22-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro quiet splash 
initrd		/boot/initrd.img-2.6.35-22-generic

title		Linux Mint 10 Julia, kernel 2.6.35-22-generic (recovery mode)
uuid		becc3759-5b33-494f-b1ad-42cfda035866
kernel		/boot/vmlinuz-2.6.35-22-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro  single
initrd		/boot/initrd.img-2.6.35-22-generic

title		Chainload into GRUB 2
root		becc3759-5b33-494f-b1ad-42cfda035866
kernel		/boot/grub/core.img

title		Linux Mint 10 Julia, memtest86+
uuid		becc3759-5b33-494f-b1ad-42cfda035866
kernel		/boot/memtest86+.bin

### END DEBIAN AUTOMAGIC KERNELS LIST
--------------------------------------------------------------------------------

=========================== sda1/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod vbe
  insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  load_video
  insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
set locale_dir=($root)/boot/grub/locale
set lang=it
insmod gettext
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=7
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/06_mint_theme ###
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
insmod png
if background_image /boot/grub/linuxmint.png ; then
  set color_normal=white/black
  set color_highlight=white/light-gray
else
  set menu_color_normal=white/black
  set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###

### BEGIN /etc/grub.d/10_linux_proxy ###
menuentry 'Linux Mint 10, 2.6.35-30-generic (/dev/sda1)' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
	linux	/boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro   
	initrd	/boot/initrd.img-2.6.35-30-generic
}
menuentry 'Linux Mint 10, 2.6.35-30-generic (/dev/sda1) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
	recordfail
	insmod part_msdos
	insmod ext2
	set root='(hd0,msdos1)'
	search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
	echo	'Loading Linux 2.6.35-30-generic ...'
	linux	/boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro single 
	echo	'Loading initial ramdisk ...'
	initrd	/boot/initrd.img-2.6.35-30-generic
}
### END /etc/grub.d/10_linux_proxy ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+_proxy ###
### END /etc/grub.d/20_memtest86+_proxy ###

### BEGIN /etc/grub.d/30_os-prober_proxy ###
menuentry "LinuxMint GNU/Linux, con Linux 3.2.0-2-486 (on /dev/sdb1)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set 3cd8bf6d-d5be-40db-983a-17fdb08a6416
	linux /boot/vmlinuz-3.2.0-2-486 root=UUID=3cd8bf6d-d5be-40db-983a-17fdb08a6416 ro quiet
	initrd /boot/initrd.img-3.2.0-2-486
}
menuentry "LinuxMint GNU/Linux, con Linux 3.2.0-2-486 (modalitÃ  ripristino) (on /dev/sdb1)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos1)'
	search --no-floppy --fs-uuid --set 3cd8bf6d-d5be-40db-983a-17fdb08a6416
	linux /boot/vmlinuz-3.2.0-2-486 root=UUID=3cd8bf6d-d5be-40db-983a-17fdb08a6416 ro single
	initrd /boot/initrd.img-3.2.0-2-486
}
menuentry "Ubuntu, with Linux 3.2.0-24-generic (on /dev/sdb3)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos3)'
	search --no-floppy --fs-uuid --set 2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422
	linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry "Ubuntu, with Linux 3.2.0-24-generic (recovery mode) (on /dev/sdb3)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos3)'
	search --no-floppy --fs-uuid --set 2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422
	linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry "Chakra Linux, with Standard-Kernel (on /dev/sdb9)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set add6f2db-81a4-4de4-8a06-8d23989f7c37
	linux /boot/vmlinuz-linux resume=/dev/disk/by-uuid/d4b4cca0-70d5-4811-ba7f-452295b82b3b root=/dev/disk/by-uuid/add6f2db-81a4-4de4-8a06-8d23989f7c37 ro quiet
	initrd /boot/initramfs-linux.img
}
menuentry "Chakra Linux, with Standard-Kernel (recovery mode) (on /dev/sdb9)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos9)'
	search --no-floppy --fs-uuid --set add6f2db-81a4-4de4-8a06-8d23989f7c37
	linux /boot/vmlinuz-linux resume=/dev/disk/by-uuid/d4b4cca0-70d5-4811-ba7f-452295b82b3b root=/dev/disk/by-uuid/add6f2db-81a4-4de4-8a06-8d23989f7c37 ro single
	initrd /boot/initramfs-linux-fallback.img
}
menuentry "Asturix, con Linux 3.0.0-19-generic (on /dev/sdb11)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos11)'
	search --no-floppy --fs-uuid --set c142d2e6-9b70-48bd-8822-407cae1b128c
	linux /boot/vmlinuz-3.0.0-19-generic root=UUID=c142d2e6-9b70-48bd-8822-407cae1b128c ro quiet splash vt.handoff=7
	initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Asturix, con Linux 3.0.0-19-generic (modalitÃ  ripristino) (on /dev/sdb11)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos11)'
	search --no-floppy --fs-uuid --set c142d2e6-9b70-48bd-8822-407cae1b128c
	linux /boot/vmlinuz-3.0.0-19-generic root=UUID=c142d2e6-9b70-48bd-8822-407cae1b128c ro recovery nomodeset
	initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "openSUSE 12.1 - 3.1.10-1.9 (on /dev/sdb13)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos13)'
	search --no-floppy --fs-uuid --set 6f9ea862-bad9-4181-b182-11646190772e
	linux /boot/vmlinuz-3.1.10-1.9-default root=/dev/disk/by-label/OpenSuseGn3 resume=/dev/disk/by-id/ata-ST3500320AS_5QM2JXJD-part10 splash=silent quiet showopts
	initrd /boot/initrd-3.1.10-1.9-default
}
menuentry "Failsafe -- openSUSE 12.1 - 3.1.10-1.9 (on /dev/sdb13)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos13)'
	search --no-floppy --fs-uuid --set 6f9ea862-bad9-4181-b182-11646190772e
	linux /boot/vmlinuz-3.1.10-1.9-default root=/dev/disk/by-label/OpenSuseGn3 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
	initrd /boot/initrd-3.1.10-1.9-default
}
menuentry "Fuduntu 2012 (Punny Name Serious Distro) (on /dev/sdb14)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos14)'
	search --no-floppy --fs-uuid --set a0810cc8-4fbd-4a5d-9178-df2785980447
	linux /boot/vmlinuz-3.4.2-1.fu2012.i686 root=/dev/sdb14
	initrd /boot/initramfs-3.4.2-1.fu2012.i686.img
}
menuentry "Fedora release 17 (Beefy Miracle) (on /dev/sdb15)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos15)'
	search --no-floppy --fs-uuid --set 5f397138-f29a-49b5-9c3e-72c538ce9146
	linux /boot/vmlinuz-3.3.4-5.fc17.i686 root=/dev/sdb15
	initrd /boot/initramfs-3.3.4-5.fc17.i686.img
}
menuentry "Linux Mint 12 32-bit, 3.0.0-13-generic (/dev/sdb16) (on /dev/sdb16)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos16)'
	search --no-floppy --fs-uuid --set 1a4af39e-2c90-4509-a41f-5a4424f9cb6f
	linux /boot/vmlinuz-3.0.0-13-generic root=UUID=1a4af39e-2c90-4509-a41f-5a4424f9cb6f ro quiet splash vt.handoff=7
	initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry "Linux Mint 12 32-bit, 3.0.0-13-generic (/dev/sdb16) -- recovery mode (on /dev/sdb16)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos16)'
	search --no-floppy --fs-uuid --set 1a4af39e-2c90-4509-a41f-5a4424f9cb6f
	linux /boot/vmlinuz-3.0.0-13-generic root=UUID=1a4af39e-2c90-4509-a41f-5a4424f9cb6f ro recovery nomodeset
	initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry "Slackware Linux (Slackware 13.37.0) (on /dev/sdb17)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos17)'
	search --no-floppy --fs-uuid --set 0bcb7084-1d52-4020-9c8b-2cc4abc3c47d
	linux /boot/vmlinuz-huge-2.6.37.6 root=/dev/sdb17
}
menuentry "Kubuntu, con Linux 3.2.0-25-generic-pae (on /dev/sdb18)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos18)'
	search --no-floppy --fs-uuid --set 33754e7b-5217-42e3-96e4-bfa1c6deaf40
	linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=33754e7b-5217-42e3-96e4-bfa1c6deaf40 ro quiet splash $vt_handoff
	initrd /boot/initrd.img-3.2.0-25-generic-pae
}
menuentry "Kubuntu, con Linux 3.2.0-25-generic-pae (modalitÃ  ripristino) (on /dev/sdb18)" {
	insmod part_msdos
	insmod ext2
	set root='(hd1,msdos18)'
	search --no-floppy --fs-uuid --set 33754e7b-5217-42e3-96e4-bfa1c6deaf40
	linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=33754e7b-5217-42e3-96e4-bfa1c6deaf40 ro recovery nomodeset
	initrd /boot/initrd.img-3.2.0-25-generic-pae
}
### END /etc/grub.d/30_os-prober_proxy ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.



### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sda1/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
/dev/sda1       /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=6100c332-3a8a-49cc-9099-4ab39bb8758f none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

               =                boot/grub/core.img                             1
               =                boot/grub/grub.cfg                             2
               =                boot/grub/menu.lst                             1
               =                boot/initrd.img-2.6.35-22-generic              1
               =                boot/initrd.img-2.6.35-30-generic              3
               =                boot/vmlinuz-2.6.35-22-generic                 1
               =                boot/vmlinuz-2.6.35-30-generic                 1
               =                grub/menu.lst                                  1
               =                grub/stage2                                    1
               =                initramfs-3.4.2-paldo1-x86                     1
               =                initrd.img                                     3
               =                initrd.img.old                                 1
               =                vmlinuz                                        1
               =                vmlinuz.old                                    1

=========================== sdb1/boot/grub/grub.cfg: ===========================

(...)

=============================== sdb1/etc/fstab: ================================

(...)

====================== sdb1/boot/extlinux/extlinux.conf: =======================
(...)
=================== sdb1: Location of files loaded by Grub: ====================

        (...)
================= sdb1: Location of files loaded by Syslinux: ==================

          (...)

============== sdb1: Version of COM32(R) files used by Syslinux: ===============

 (...)
=========================== sdb3/boot/grub/grub.cfg: ===========================
(...)

=============================== sdb3/etc/fstab: ================================

(...)

====================== sdb3/boot/extlinux/extlinux.conf: =======================

(...)

=================== sdb3: Location of files loaded by Grub: ====================

           (...)

================= sdb3: Location of files loaded by Syslinux: ==================

          (...)
============== sdb3: Version of COM32(R) files used by Syslinux: ===============

(...)

=========================== sdb9/boot/grub/grub.cfg: ===========================
(...)

=============================== sdb9/etc/fstab: ================================
(...)

======================= sdb9/boot/syslinux/syslinux.cfg: =======================

(...)

=================== sdb9: Location of files loaded by Grub: ====================

       (...)

================= sdb9: Location of files loaded by Syslinux: ==================

         (...)
========================== sdb11/boot/grub/grub.cfg: ===========================

(...)
=============================== sdb11/etc/fstab: ===============================
(...)

====================== sdb11/boot/extlinux/extlinux.conf: ======================
(...)
=================== sdb11: Location of files loaded by Grub: ===================

       (...)
================= sdb11: Location of files loaded by Syslinux: =================

        (...)

============== sdb11: Version of COM32(R) files used by Syslinux: ==============
(...)

========================== sdb13/boot/grub/menu.lst: ===========================
(...)

=============================== sdb13/etc/fstab: ===============================
(...)

=================== sdb13: Location of files loaded by Grub: ===================

          (...)

=============================== sdb14/etc/fstab: ===============================

(...)
=================== sdb14: Location of files loaded by Grub: ===================

         (...)

========================== sdb15/boot/grub2/grub.cfg: ==========================
(...)

=============================== sdb15/etc/fstab: ===============================
(...)

=================== sdb15: Location of files loaded by Grub: ===================

        (...)
========================== sdb16/boot/grub/grub.cfg: ===========================
(...)

=============================== sdb16/etc/fstab: ===============================
(...)
=================== sdb16: Location of files loaded by Grub: ===================

           (...)

[b]=============================== sdb17/etc/fstab: ===============================

--------------------------------------------------------------------------------
devpts              /dev/pts            devpts         gid=5,mode=620      0         0
proc                /proc               proc           defaults            0         0
tmpfs               /dev/shm            tmpfs          defaults            0         0
/dev/sda5           swap                swap           defaults            0         0
/dev/sdb2           swap                swap           defaults            0         0
/dev/sdb10          swap                swap           defaults            0         0
/dev/sdb12          swap                swap           defaults            0         0
/dev/sdb17          /                   ext4           noatime,defaults    1         1
--------------------------------------------------------------------------------

=================== sdb17: Location of files loaded by Grub: ===================

           GiB - GB             File                                 Fragment(s)

               =                boot/vmlinuz                                   1
               =                boot/vmlinuz-huge-2.6.37.6                     1[/b]

========================== sdb18/boot/grub/grub.cfg: ===========================

-(...)

=============================== sdb18/etc/fstab: ===============================

(...)

====================== sdb18/boot/extlinux/extlinux.conf: ======================
(...)


=================== sdb18: Location of files loaded by Grub: ===================

         (...)

================= sdb18: Location of files loaded by Syslinux: =================

         (...)

============== sdb18: Version of COM32(R) files used by Syslinux: ==============

(...)

=================== sdb19: Location of files loaded by Grub: ===================

          (...)
=========================== sdc1/boot/grub/menu.lst: ===========================
(...)
=================== sdc1: Location of files loaded by Grub: ====================

   (...)

================= sdc1: Location of files loaded by Syslinux: ==================

        (...)

============== sdc1: Version of COM32(R) files used by Syslinux: ===============

 (...)

======================== Unknown MBRs/Boot Sectors/etc: ========================

Unknown BootLoader on sda2

00000000  00 00 00 00 00 00 00 00  58 00 00 00 00 00 00 00  |........X.......|
00000010  01 00 00 00 18 00 00 00  00 00 00 00 00 00 00 00  |................|
00000020  0b 00 0b 00 28 00 18 00  40 00 18 00 18 00 01 00  |....(...@.......|
00000030  08 01 00 00 04 00 02 00  dd 00 00 00 00 00 00 00  |................|
00000040  dd 00 0c 00 00 00 00 00  00 70 36 01 00 00 00 00  |.........p6.....|
00000050  00 a0 7f 00 00 00 00 00  00 70 36 01 00 00 00 00  |.........p6.....|
00000060  00 70 36 01 00 00 00 00  00 90 7f 00 00 00 00 00  |.p6.............|
00000070  00 70 36 01 00 00 00 00  cf 83 34 09 00 00 00 00  |.p6.......4.....|
00000080  be 83 34 09 00 00 00 00  00 00 00 00 00 00 00 00  |..4.............|
00000090  28 00 00 00 00 00 00 00  01 00 00 00 18 00 00 00  |(...............|
000000a0  00 00 00 00 00 00 00 00  1b 00 01 00 28 00 00 00  |............(...|
000000b0  28 00 00 00 18 00 00 00  00 00 00 00 00 00 02 00  |(...............|
000000c0  00 00 00 00 00 00 00 00  00 00 00 00 e8 16 df 83  |................|
000000d0  da 83 34 09 00 00 00 00  00 00 00 00 00 00 00 00  |..4.............|
000000e0  00 00 00 00 00 00 00 00  58 00 00 00 00 00 00 00  |........X.......|
000000f0  01 00 00 00 18 00 00 00  00 00 00 00 00 00 00 00  |................|
00000100  0b 00 0b 00 28 00 18 00  40 00 18 00 18 00 01 00  |....(...@.......|
00000110  08 01 00 00 04 00 02 00  dd 00 00 00 00 00 00 00  |................|
00000120  dd 00 0c 00 00 00 00 00  00 70 36 01 00 00 00 00  |.........p6.....|
00000130  00 b0 7f 00 00 00 00 00  00 70 36 01 00 00 00 00  |.........p6.....|
00000140  00 70 36 01 00 00 00 00  00 a0 7f 00 00 00 00 00  |.p6.............|
00000150  00 70 36 01 00 00 00 00  eb 83 34 09 00 00 00 00  |.p6.......4.....|
00000160  da 83 34 09 00 00 00 00  00 00 00 00 00 00 00 00  |..4.............|
00000170  28 00 00 00 00 00 00 00  01 00 00 00 18 00 00 00  |(...............|
00000180  00 00 00 00 00 00 00 00  1b 00 01 00 28 00 00 00  |............(...|
00000190  28 00 00 00 18 00 00 00  00 00 00 00 00 00 02 00  |(...............|
000001a0  00 00 00 00 00 00 00 00  00 00 00 00 e8 16 df 83  |................|
000001b0  f6 83 34 09 00 00 00 00  00 00 00 00 00 00 00 fe  |..4.............|
000001c0  ff ff 82 fe ff ff 02 00  00 00 00 40 1a 00 00 00  |...........@....|
000001d0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|
*
000001f0  00 00 00 00 00 00 00 00  00 00 00 00 00 00 55 aa  |..............U.|
00000200


=============================== StdErr Messages: ===============================

xz: (stdin): I dati compressi sono danneggiati
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in

Edit (Shador): Please use code tags especially for such extremely long pastes or upload them to some other site.

Shador · Post by **Shador** » 24. Jun 2012, 10:29

Adys wrote: I don't know if this is part of the problem, but...

According to the "Start/End blocks", the order of some (primary and logical) partitions is "shifted" (not that it is a problem by itself, but maybe it is part of the cause for the difficulties to boot).

No, completely unproblematic.

Shador wrote:here are the avaible partitions: (...) sda driver : sd (...) sda1 (...) sda 2 (...) sda 5 (..)>

Could you complete that listing? Or is the second drive (sdb) not listed at all? What kind of drive is it? What partition map?

[SOLVED] Salix and Grub2

[SOLVED] Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2

Re: Salix and Grub2