Page 1 of 4
[SOLVED] Salix and Grub2
Posted: 21. Jun 2012, 17:42
by fran
Hi. In my main drive I have Linux Mint 10, which controls the grub2 using <Grub customizer>. I installed Salix on a partition of external USB disk, along with other OS. I followed directions on the web and I was comforted by your Forum (Installation: Loading Salix OS using Ubuntu's GRUB2?). So I got rid of lilo at the end of the installation. In fact after reboot I see Salix on the list of OSs bootable. But unfortunately, at the boot as a result I got a <VFS: Cannot open root device "sdb17" or unknow-block (0,0); please append a correct "root=" boot option;here are the avaible partitions: (...) sda driver : sd (...) sda1 (...) sda 2 (...) sda 5 (..)> and then <(...) kernel panic - not syncing: VFS : Unable to mount root fs on unknow-block (0,0) (...)>
Any suggestion?
Re: Salix and Grub2
Posted: 21. Jun 2012, 20:13
by Shador
Yes, give me your partition layout and send me a 2-day all inclusive holiday trip somewhere far, far away.
Ok that second part was just joking, but I'm serious about the first.
Hey, wait, I think you're eating banana ice cream right now. No? Wrong guess? Ok, maybe clairvoyant isn't the right job for me.
At least you attached the full error message.
So my guess that you hit a bug in os-prober I read about. But let's see.
Re: Salix and Grub2
Posted: 21. Jun 2012, 20:30
by fran
We can discuss over the 2-day all inclusive holiday trip, of course.
Here you are:
df -h
File system Dim. Usati Dispon. Uso% Montato su
rootfs 16G 6,2G 9,6G 40% /
devtmpfs 494M 0 494M 0% /dev
tmpfs 502M 236K 502M 1% /dev/shm
tmpfs 502M 1,5M 500M 1% /run
/dev/sdb15 16G 6,2G 9,6G 40% /
tmpfs 502M 0 502M 0% /sys/fs/cgroup
tmpfs 502M 0 502M 0% /media
/dev/sdb9 20G 5,4G 14G 29% /run/media/fran/Chakra
/dev/sdc1 7,3G 6,0G 1,4G 82% /run/media/fran/MULTISYSTEM
/dev/sdb7 49G 15G 35G 30% /run/media/fran/USB_DOCS
/dev/sdb8 69G 65G 3,8G 95% /run/media/fran/USB_APPS
/dev/sdb5 88G 46G 43G 52% /run/media/fran/USB_IMMAGIN
/dev/sdb18 20G 12G 7,1G 63% /run/media/fran/Kubuntu1204
/dev/sdb6 67G 22G 46G 33% /run/media/fran/USB_MUSICA
/dev/sdb19 14G 340M 13G 3% /run/media/fran/Arch
/dev/sdb3 14G 7,8G 4,7G 63% /run/media/fran/Hybryde
/dev/sdb1 14G 11G 2,5G 81% /run/media/fran/LMDE
/dev/sdb17 22G 3,6G 17G 18% /run/media/fran/0bcb7084-1d52-4020-9c8b-2cc4abc3c47d
/dev/sdb11 14G 5,4G 8,0G 41% /run/media/fran/Asturix
/dev/sdb14 20G 5,0G 15G 26% /run/media/fran/Fuduntu-i386
/dev/sdb13 21G 8,0G 12G 42% /run/media/fran/OpenSuse
/dev/sdb16 20G 5,3G 14G 29% /run/media/fran/MintGnome3
Re: Salix and Grub2
Posted: 21. Jun 2012, 21:04
by Shador
Do you have the output of fdisk -l and blkid too? It seems like maybe the device order is not stable but to be sure I would need the whole partition listing that goes with the kernel panic.
Re: Salix and Grub2
Posted: 22. Jun 2012, 06:47
by fran
fdisk -l
Disk /dev/sda: 20.0 GB, 20003880960 bytes
255 testine, 63 settori/tracce, 2432 cilindri, totale 39070080 settori
Unità = settori di 1 * 512 = 512 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x0003c278
Dispositivo Boot Start End Blocks Id System
/dev/sda1 * 2048 37347327 18672640 83 Linux
/dev/sda2 37349374 39069695 860161 5 Esteso
/dev/sda5 37349376 39069695 860160 82 Linux swap / Solaris
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 testine, 63 settori/tracce, 60801 cilindri, totale 976773168 settori
Unità = settori di 1 * 512 = 512 byte
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Identificativo disco: 0x000df893
Dispositivo Boot Start End Blocks Id System
/dev/sdb1 63 27535359 13767648+ 83 Linux
/dev/sdb2 55070820 57544829 1237005 82 Linux swap / Solaris
/dev/sdb3 27535360 55070719 13767680 83 Linux
/dev/sdb4 59588606 976773119 458592257 5 Esteso
/dev/sdb5 162304758 346618439 92156841 b W95 FAT32
/dev/sdb6 346618503 486621183 70001340+ b W95 FAT32
/dev/sdb7 530932248 633333759 51200756 b W95 FAT32
/dev/sdb8 674296308 817660304 71681998+ b W95 FAT32
/dev/sdb9 817661952 858677576 20507812+ 83 Linux
/dev/sdb10 973797376 976773119 1487872 82 Linux swap / Solaris
/dev/sdb11 103702528 133001215 14649344 83 Linux
/dev/sdb12 101787903 103699574 955836 82 Linux swap / Solaris
/dev/sdb13 59588608 101785599 21098496 83 Linux
/dev/sdb14 899575803 940533759 20478978+ 83 Linux
/dev/sdb15 * 940541553 973796039 16627243+ 83 Linux
/dev/sdb16 858681344 899573759 20446208 83 Linux
/dev/sdb17 486623232 530931711 22154240 83 Linux
/dev/sdb18 633335808 674295807 20480000 83 Linux
/dev/sdb19 133003264 162303999 14650368 83 Linux
blkid
/dev/sda1: UUID="becc3759-5b33-494f-b1ad-42cfda035866" TYPE="ext4"
/dev/sda5: UUID="2e040a71-c3f1-49d4-bb4b-894573584396" TYPE="swap"
/dev/sdb1: LABEL="LMDE" UUID="3cd8bf6d-d5be-40db-983a-17fdb08a6416" TYPE="ext4"
/dev/sdb2: UUID="bb0ee1fa-a35d-4c7d-b96b-b94e6ca21796" TYPE="swap"
/dev/sdb3: LABEL="Hybryde" UUID="2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422" TYPE="ext4"
/dev/sdb5: LABEL="USB_IMMAGIN" UUID="8408-8B1E" TYPE="vfat"
/dev/sdb6: LABEL="USB_MUSICAM-t" UUID="8966-E81D" TYPE="vfat"
/dev/sdb7: LABEL="USB_DOCS" UUID="8F85-8939" TYPE="vfat"
/dev/sdb8: LABEL="USB_APPS" UUID="939B-D8D8" TYPE="vfat"
/dev/sdb9: LABEL="Chakra" UUID="add6f2db-81a4-4de4-8a06-8d23989f7c37" TYPE="ext4"
/dev/sdb10: UUID="5f1f9e3d-9db2-42ef-afaf-9780015aacd1" TYPE="swap"
/dev/sdb11: LABEL="Asturix" UUID="c142d2e6-9b70-48bd-8822-407cae1b128c" TYPE="ext4"
/dev/sdb12: UUID="53db5ba5-64d6-4bbe-a206-2efffa71021d" TYPE="swap"
/dev/sdb13: LABEL="OpenSuse" UUID="6f9ea862-bad9-4181-b182-11646190772e" TYPE="ext4"
/dev/sdb14: LABEL="Fuduntu-i386" UUID="a0810cc8-4fbd-4a5d-9178-df2785980447" TYPE="ext4"
/dev/sdb15: LABEL="_Fedora-17-i686-" UUID="5f397138-f29a-49b5-9c3e-72c538ce9146" TYPE="ext4"
/dev/sdb16: LABEL="MintGnome3" UUID="1a4af39e-2c90-4509-a41f-5a4424f9cb6f" TYPE="ext4"
/dev/sdb17: UUID="0bcb7084-1d52-4020-9c8b-2cc4abc3c47d" TYPE="ext4"
/dev/sdb18: LABEL="Kubuntu1204" UUID="33754e7b-5217-42e3-96e4-bfa1c6deaf40" TYPE="ext4"
/dev/sdb19: LABEL="Arch" UUID="995f3f00-971f-4a7b-97e9-7cf8f7280db7" TYPE="ext4"
/dev/sdc1: LABEL="MULTISYSTEM" UUID="0D3D-5DA6" TYPE="vfat"
Re: Salix and Grub2
Posted: 22. Jun 2012, 07:40
by Adys
Shador wrote:It seems like maybe the device order is not stable
I don't know if this is part of the problem, but...
According to the "Start/End blocks", the order of some (primary and logical) partitions is "shifted" (not that it is a problem by itself, but maybe it is part of the cause for the difficulties to boot).
Code: Select all
sdb
1 - 3 - 2 - 4
13 - 12 - 11 - 19 - 5 - 6 - 17 - 7 - 18 - 8 - 9 - 16 - 14 - 15
with sdb4 as extended partition and sdb15 marked as bootable/active partition.
Re: Salix and Grub2
Posted: 22. Jun 2012, 07:49
by fran
Thank you. I am aware that the partitioning over time is a little messed up. Nevertheless with the other OS I have no boot problems. The failure to start is own of Salix. I was wondering if (entering the system via chroot) I can install Grub2 in Salix.
Re: Salix and Grub2
Posted: 22. Jun 2012, 08:31
by Adys
You could try posting the info from the boot_info_script (
http://sourceforge.net/projects/bootinf ... nfoscript/ ). So maybe knowing what is currently in your Salix partition could help (post the results.txt from BIS, or at least the relvant info of the specific Salix partition). Now I'll leave the rest to
Shador .
Re: Salix and Grub2
Posted: 22. Jun 2012, 11:13
by fran
Boot Info Script 0.61 [1 April 2012]
Code: Select all
============================= Boot Info Summary: ===============================
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sda and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 1 for (,msdos1)/boot/grub.
=> Grub2 (v1.97-1.98) is installed in the MBR of /dev/sdb and looks at sector
1 of the same hard drive for core.img. core.img is at this location and
looks in partition 1 for (,msdos1)/boot/grub.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
sda1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 10 Julia
Boot files: /grub/menu.lst /boot/grub/menu.lst /boot/grub/grub.cfg
/etc/fstab /boot/grub/core.img
sda2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint Debian Edition
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sdb2: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb3: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sdb4: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: According to the info in the boot sector, sdb5 starts
at sector 0. But according to the info from fdisk,
sdb5 starts at sector 162304758.
Operating System:
Boot files:
sdb6: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb7: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdb8: __________________________________________________________________________
File system: vfat
Boot sector type: Windows 7: FAT32
Boot sector info: According to the info in the boot sector, sdb8 starts
at sector 0. But according to the info from fdisk,
sdb8 starts at sector 674296308.
Operating System:
Boot files:
sdb9: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Chakra Linux (2012.02.08 -
Archimedes) () ()
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/syslinux/syslinux.cfg /boot/grub/core.img
sdb10: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb11: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.10
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sdb12: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb13: _________________________________________________________________________
File system: ext4
Boot sector type: Grub Legacy
Boot sector info: Grub Legacy (v0.97) is installed in the boot sector
of sdb13 and looks at sector 93681568 of the same hard
drive for the stage2 file. A stage2 file is at this
location on /dev/sdb. Stage2 looks on partition #13
for /boot/grub/menu.lst.
Operating System: Welcome to openSUSE 12.1
"Asparagus" - Kernel ().
Boot files: /boot/grub/menu.lst /etc/fstab
sdb14: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Fuduntu (Punny Name Serious
Distro)
Boot files: /etc/fstab
sdb15: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Fedora release 17 (Beefy
Miracle) Kernel on an ()
Boot files: /boot/grub2/grub.cfg /etc/fstab
sdb16: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 12 Lisa
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
[b]sdb17: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Slackware 13.37.0
Boot files: /etc/fstab[/b]
sdb18: _________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.04 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
/boot/extlinux/extlinux.conf /boot/grub/core.img
sdb19: _________________________________________________________________________
(...)
sdc1: __________________________________________________________________________
(...)
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
(...)
Drive: sdb _____________________________________________________________________
(...)
Drive: sdc _____________________________________________________________________
(...)
(...)
"blkid" output: ________________________________________________________________
(...)
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sdb18 / ext4 (rw,errors=remount-ro)
/dev/sdb7 /media/USB_DOCS vfat (rw,nosuid,nodev,uid=1000,gid=1000,shortname=mixed,dmask=0077,utf8=1,showexec,uhelper=udisks)
============================= sda1/grub/menu.lst: ==============================
--------------------------------------------------------------------------------
timeout 5
default saved
title paldo stable (linux 3.4.2-paldo1-x86)
kernel /boot/linux-3.4.2-paldo1-x86 root=/dev/disk/by-uuid/86c21aa1-9232-4c3c-a6a7-4ddd6dc9484e resume=/dev/disk/by-uuid/bb0ee1fa-a35d-4c7d-b96b-b94e6ca21796
initrd /boot/initramfs-3.4.2-paldo1-x86
--------------------------------------------------------------------------------
=========================== sda1/boot/grub/menu.lst: ===========================
--------------------------------------------------------------------------------
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=becc3759-5b33-494f-b1ad-42cfda035866
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Linux Mint 10 Julia, kernel 2.6.35-30-generic
uuid becc3759-5b33-494f-b1ad-42cfda035866
kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro quiet splash
initrd /boot/initrd.img-2.6.35-30-generic
title Linux Mint 10 Julia, kernel 2.6.35-30-generic (recovery mode)
uuid becc3759-5b33-494f-b1ad-42cfda035866
kernel /boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro single
initrd /boot/initrd.img-2.6.35-30-generic
title Linux Mint 10 Julia, kernel 2.6.35-22-generic
uuid becc3759-5b33-494f-b1ad-42cfda035866
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
title Linux Mint 10 Julia, kernel 2.6.35-22-generic (recovery mode)
uuid becc3759-5b33-494f-b1ad-42cfda035866
kernel /boot/vmlinuz-2.6.35-22-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro single
initrd /boot/initrd.img-2.6.35-22-generic
title Chainload into GRUB 2
root becc3759-5b33-494f-b1ad-42cfda035866
kernel /boot/grub/core.img
title Linux Mint 10 Julia, memtest86+
uuid becc3759-5b33-494f-b1ad-42cfda035866
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
--------------------------------------------------------------------------------
=========================== sda1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
set locale_dir=($root)/boot/grub/locale
set lang=it
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=7
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux_proxy ###
menuentry 'Linux Mint 10, 2.6.35-30-generic (/dev/sda1)' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro
initrd /boot/initrd.img-2.6.35-30-generic
}
menuentry 'Linux Mint 10, 2.6.35-30-generic (/dev/sda1) -- recovery mode' --class linuxmint --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set becc3759-5b33-494f-b1ad-42cfda035866
echo 'Loading Linux 2.6.35-30-generic ...'
linux /boot/vmlinuz-2.6.35-30-generic root=UUID=becc3759-5b33-494f-b1ad-42cfda035866 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-30-generic
}
### END /etc/grub.d/10_linux_proxy ###
### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+_proxy ###
### END /etc/grub.d/20_memtest86+_proxy ###
### BEGIN /etc/grub.d/30_os-prober_proxy ###
menuentry "LinuxMint GNU/Linux, con Linux 3.2.0-2-486 (on /dev/sdb1)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 3cd8bf6d-d5be-40db-983a-17fdb08a6416
linux /boot/vmlinuz-3.2.0-2-486 root=UUID=3cd8bf6d-d5be-40db-983a-17fdb08a6416 ro quiet
initrd /boot/initrd.img-3.2.0-2-486
}
menuentry "LinuxMint GNU/Linux, con Linux 3.2.0-2-486 (modalità ripristino) (on /dev/sdb1)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 3cd8bf6d-d5be-40db-983a-17fdb08a6416
linux /boot/vmlinuz-3.2.0-2-486 root=UUID=3cd8bf6d-d5be-40db-983a-17fdb08a6416 ro single
initrd /boot/initrd.img-3.2.0-2-486
}
menuentry "Ubuntu, with Linux 3.2.0-24-generic (on /dev/sdb3)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set 2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry "Ubuntu, with Linux 3.2.0-24-generic (recovery mode) (on /dev/sdb3)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos3)'
search --no-floppy --fs-uuid --set 2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422
linux /boot/vmlinuz-3.2.0-24-generic root=UUID=2c9c1cd6-c1c6-4e8c-bd6c-649abc43d422 ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-24-generic
}
menuentry "Chakra Linux, with Standard-Kernel (on /dev/sdb9)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos9)'
search --no-floppy --fs-uuid --set add6f2db-81a4-4de4-8a06-8d23989f7c37
linux /boot/vmlinuz-linux resume=/dev/disk/by-uuid/d4b4cca0-70d5-4811-ba7f-452295b82b3b root=/dev/disk/by-uuid/add6f2db-81a4-4de4-8a06-8d23989f7c37 ro quiet
initrd /boot/initramfs-linux.img
}
menuentry "Chakra Linux, with Standard-Kernel (recovery mode) (on /dev/sdb9)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos9)'
search --no-floppy --fs-uuid --set add6f2db-81a4-4de4-8a06-8d23989f7c37
linux /boot/vmlinuz-linux resume=/dev/disk/by-uuid/d4b4cca0-70d5-4811-ba7f-452295b82b3b root=/dev/disk/by-uuid/add6f2db-81a4-4de4-8a06-8d23989f7c37 ro single
initrd /boot/initramfs-linux-fallback.img
}
menuentry "Asturix, con Linux 3.0.0-19-generic (on /dev/sdb11)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set c142d2e6-9b70-48bd-8822-407cae1b128c
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=c142d2e6-9b70-48bd-8822-407cae1b128c ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "Asturix, con Linux 3.0.0-19-generic (modalità ripristino) (on /dev/sdb11)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set c142d2e6-9b70-48bd-8822-407cae1b128c
linux /boot/vmlinuz-3.0.0-19-generic root=UUID=c142d2e6-9b70-48bd-8822-407cae1b128c ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-19-generic
}
menuentry "openSUSE 12.1 - 3.1.10-1.9 (on /dev/sdb13)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos13)'
search --no-floppy --fs-uuid --set 6f9ea862-bad9-4181-b182-11646190772e
linux /boot/vmlinuz-3.1.10-1.9-default root=/dev/disk/by-label/OpenSuseGn3 resume=/dev/disk/by-id/ata-ST3500320AS_5QM2JXJD-part10 splash=silent quiet showopts
initrd /boot/initrd-3.1.10-1.9-default
}
menuentry "Failsafe -- openSUSE 12.1 - 3.1.10-1.9 (on /dev/sdb13)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos13)'
search --no-floppy --fs-uuid --set 6f9ea862-bad9-4181-b182-11646190772e
linux /boot/vmlinuz-3.1.10-1.9-default root=/dev/disk/by-label/OpenSuseGn3 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe
initrd /boot/initrd-3.1.10-1.9-default
}
menuentry "Fuduntu 2012 (Punny Name Serious Distro) (on /dev/sdb14)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos14)'
search --no-floppy --fs-uuid --set a0810cc8-4fbd-4a5d-9178-df2785980447
linux /boot/vmlinuz-3.4.2-1.fu2012.i686 root=/dev/sdb14
initrd /boot/initramfs-3.4.2-1.fu2012.i686.img
}
menuentry "Fedora release 17 (Beefy Miracle) (on /dev/sdb15)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos15)'
search --no-floppy --fs-uuid --set 5f397138-f29a-49b5-9c3e-72c538ce9146
linux /boot/vmlinuz-3.3.4-5.fc17.i686 root=/dev/sdb15
initrd /boot/initramfs-3.3.4-5.fc17.i686.img
}
menuentry "Linux Mint 12 32-bit, 3.0.0-13-generic (/dev/sdb16) (on /dev/sdb16)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos16)'
search --no-floppy --fs-uuid --set 1a4af39e-2c90-4509-a41f-5a4424f9cb6f
linux /boot/vmlinuz-3.0.0-13-generic root=UUID=1a4af39e-2c90-4509-a41f-5a4424f9cb6f ro quiet splash vt.handoff=7
initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry "Linux Mint 12 32-bit, 3.0.0-13-generic (/dev/sdb16) -- recovery mode (on /dev/sdb16)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos16)'
search --no-floppy --fs-uuid --set 1a4af39e-2c90-4509-a41f-5a4424f9cb6f
linux /boot/vmlinuz-3.0.0-13-generic root=UUID=1a4af39e-2c90-4509-a41f-5a4424f9cb6f ro recovery nomodeset
initrd /boot/initrd.img-3.0.0-13-generic
}
menuentry "Slackware Linux (Slackware 13.37.0) (on /dev/sdb17)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos17)'
search --no-floppy --fs-uuid --set 0bcb7084-1d52-4020-9c8b-2cc4abc3c47d
linux /boot/vmlinuz-huge-2.6.37.6 root=/dev/sdb17
}
menuentry "Kubuntu, con Linux 3.2.0-25-generic-pae (on /dev/sdb18)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos18)'
search --no-floppy --fs-uuid --set 33754e7b-5217-42e3-96e4-bfa1c6deaf40
linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=33754e7b-5217-42e3-96e4-bfa1c6deaf40 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.2.0-25-generic-pae
}
menuentry "Kubuntu, con Linux 3.2.0-25-generic-pae (modalità ripristino) (on /dev/sdb18)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos18)'
search --no-floppy --fs-uuid --set 33754e7b-5217-42e3-96e4-bfa1c6deaf40
linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=33754e7b-5217-42e3-96e4-bfa1c6deaf40 ro recovery nomodeset
initrd /boot/initrd.img-3.2.0-25-generic-pae
}
### END /etc/grub.d/30_os-prober_proxy ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=6100c332-3a8a-49cc-9099-4ab39bb8758f none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/core.img 1
= boot/grub/grub.cfg 2
= boot/grub/menu.lst 1
= boot/initrd.img-2.6.35-22-generic 1
= boot/initrd.img-2.6.35-30-generic 3
= boot/vmlinuz-2.6.35-22-generic 1
= boot/vmlinuz-2.6.35-30-generic 1
= grub/menu.lst 1
= grub/stage2 1
= initramfs-3.4.2-paldo1-x86 1
= initrd.img 3
= initrd.img.old 1
= vmlinuz 1
= vmlinuz.old 1
=========================== sdb1/boot/grub/grub.cfg: ===========================
(...)
=============================== sdb1/etc/fstab: ================================
(...)
====================== sdb1/boot/extlinux/extlinux.conf: =======================
(...)
=================== sdb1: Location of files loaded by Grub: ====================
(...)
================= sdb1: Location of files loaded by Syslinux: ==================
(...)
============== sdb1: Version of COM32(R) files used by Syslinux: ===============
(...)
=========================== sdb3/boot/grub/grub.cfg: ===========================
(...)
=============================== sdb3/etc/fstab: ================================
(...)
====================== sdb3/boot/extlinux/extlinux.conf: =======================
(...)
=================== sdb3: Location of files loaded by Grub: ====================
(...)
================= sdb3: Location of files loaded by Syslinux: ==================
(...)
============== sdb3: Version of COM32(R) files used by Syslinux: ===============
(...)
=========================== sdb9/boot/grub/grub.cfg: ===========================
(...)
=============================== sdb9/etc/fstab: ================================
(...)
======================= sdb9/boot/syslinux/syslinux.cfg: =======================
(...)
=================== sdb9: Location of files loaded by Grub: ====================
(...)
================= sdb9: Location of files loaded by Syslinux: ==================
(...)
========================== sdb11/boot/grub/grub.cfg: ===========================
(...)
=============================== sdb11/etc/fstab: ===============================
(...)
====================== sdb11/boot/extlinux/extlinux.conf: ======================
(...)
=================== sdb11: Location of files loaded by Grub: ===================
(...)
================= sdb11: Location of files loaded by Syslinux: =================
(...)
============== sdb11: Version of COM32(R) files used by Syslinux: ==============
(...)
========================== sdb13/boot/grub/menu.lst: ===========================
(...)
=============================== sdb13/etc/fstab: ===============================
(...)
=================== sdb13: Location of files loaded by Grub: ===================
(...)
=============================== sdb14/etc/fstab: ===============================
(...)
=================== sdb14: Location of files loaded by Grub: ===================
(...)
========================== sdb15/boot/grub2/grub.cfg: ==========================
(...)
=============================== sdb15/etc/fstab: ===============================
(...)
=================== sdb15: Location of files loaded by Grub: ===================
(...)
========================== sdb16/boot/grub/grub.cfg: ===========================
(...)
=============================== sdb16/etc/fstab: ===============================
(...)
=================== sdb16: Location of files loaded by Grub: ===================
(...)
[b]=============================== sdb17/etc/fstab: ===============================
--------------------------------------------------------------------------------
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
/dev/sda5 swap swap defaults 0 0
/dev/sdb2 swap swap defaults 0 0
/dev/sdb10 swap swap defaults 0 0
/dev/sdb12 swap swap defaults 0 0
/dev/sdb17 / ext4 noatime,defaults 1 1
--------------------------------------------------------------------------------
=================== sdb17: Location of files loaded by Grub: ===================
GiB - GB File Fragment(s)
= boot/vmlinuz 1
= boot/vmlinuz-huge-2.6.37.6 1[/b]
========================== sdb18/boot/grub/grub.cfg: ===========================
-(...)
=============================== sdb18/etc/fstab: ===============================
(...)
====================== sdb18/boot/extlinux/extlinux.conf: ======================
(...)
=================== sdb18: Location of files loaded by Grub: ===================
(...)
================= sdb18: Location of files loaded by Syslinux: =================
(...)
============== sdb18: Version of COM32(R) files used by Syslinux: ==============
(...)
=================== sdb19: Location of files loaded by Grub: ===================
(...)
=========================== sdc1/boot/grub/menu.lst: ===========================
(...)
=================== sdc1: Location of files loaded by Grub: ====================
(...)
================= sdc1: Location of files loaded by Syslinux: ==================
(...)
============== sdc1: Version of COM32(R) files used by Syslinux: ===============
(...)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda2
00000000 00 00 00 00 00 00 00 00 58 00 00 00 00 00 00 00 |........X.......|
00000010 01 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 0b 00 0b 00 28 00 18 00 40 00 18 00 18 00 01 00 |....(...@.......|
00000030 08 01 00 00 04 00 02 00 dd 00 00 00 00 00 00 00 |................|
00000040 dd 00 0c 00 00 00 00 00 00 70 36 01 00 00 00 00 |.........p6.....|
00000050 00 a0 7f 00 00 00 00 00 00 70 36 01 00 00 00 00 |.........p6.....|
00000060 00 70 36 01 00 00 00 00 00 90 7f 00 00 00 00 00 |.p6.............|
00000070 00 70 36 01 00 00 00 00 cf 83 34 09 00 00 00 00 |.p6.......4.....|
00000080 be 83 34 09 00 00 00 00 00 00 00 00 00 00 00 00 |..4.............|
00000090 28 00 00 00 00 00 00 00 01 00 00 00 18 00 00 00 |(...............|
000000a0 00 00 00 00 00 00 00 00 1b 00 01 00 28 00 00 00 |............(...|
000000b0 28 00 00 00 18 00 00 00 00 00 00 00 00 00 02 00 |(...............|
000000c0 00 00 00 00 00 00 00 00 00 00 00 00 e8 16 df 83 |................|
000000d0 da 83 34 09 00 00 00 00 00 00 00 00 00 00 00 00 |..4.............|
000000e0 00 00 00 00 00 00 00 00 58 00 00 00 00 00 00 00 |........X.......|
000000f0 01 00 00 00 18 00 00 00 00 00 00 00 00 00 00 00 |................|
00000100 0b 00 0b 00 28 00 18 00 40 00 18 00 18 00 01 00 |....(...@.......|
00000110 08 01 00 00 04 00 02 00 dd 00 00 00 00 00 00 00 |................|
00000120 dd 00 0c 00 00 00 00 00 00 70 36 01 00 00 00 00 |.........p6.....|
00000130 00 b0 7f 00 00 00 00 00 00 70 36 01 00 00 00 00 |.........p6.....|
00000140 00 70 36 01 00 00 00 00 00 a0 7f 00 00 00 00 00 |.p6.............|
00000150 00 70 36 01 00 00 00 00 eb 83 34 09 00 00 00 00 |.p6.......4.....|
00000160 da 83 34 09 00 00 00 00 00 00 00 00 00 00 00 00 |..4.............|
00000170 28 00 00 00 00 00 00 00 01 00 00 00 18 00 00 00 |(...............|
00000180 00 00 00 00 00 00 00 00 1b 00 01 00 28 00 00 00 |............(...|
00000190 28 00 00 00 18 00 00 00 00 00 00 00 00 00 02 00 |(...............|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 e8 16 df 83 |................|
000001b0 f6 83 34 09 00 00 00 00 00 00 00 00 00 00 00 fe |..4.............|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 40 1a 00 00 00 |...........@....|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
xz: (stdin): I dati compressi sono danneggiati
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
Edit (Shador): Please use code tags especially for such extremely long pastes or upload them to some other site.
Re: Salix and Grub2
Posted: 24. Jun 2012, 10:29
by Shador
Adys wrote:
I don't know if this is part of the problem, but...
According to the "Start/End blocks", the order of some (primary and logical) partitions is "shifted" (not that it is a problem by itself, but maybe it is part of the cause for the difficulties to boot).
No, completely unproblematic.
Shador wrote:here are the avaible partitions: (...) sda driver : sd (...) sda1 (...) sda 2 (...) sda 5 (..)>
Could you complete that listing? Or is the second drive (sdb) not listed at all? What kind of drive is it? What partition map?